2005 Dodge Magnum
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Magnum › 2005
These records cover every 2005 Dodge Magnum. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2005 Dodge Magnum. Newest first.
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge…
Risk and remedy
Risk
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Chrysler (FCA US LLC) is recalling certain model year 2005-2009 Dodge Ram 2500, 2004-2008 Dodge Ram 1500 and Durango, 2006-2009 Dodge Ram 3500, 2008-2010 Dodge Ram 4500 and 5500, 2007-2008 Chrysler Aspen, 2005-2010 Chrysler 300, 300C, 300S, and SRT8, 2006-2010 Dodge Charger, 2005-2008 Magnum, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles.…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the affected Chrysler and Dodge owners and Mitsubishi will notify the affected Raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for Chrylser on June 8, 2015. The recall for Mitsubishi started on June 24, 2015. Chrysler and Dodge owners may contact Chrysler customer service at 1-800-853-1403. Mitsubishi owners may call 1-888-648-7820. Chrysler's number for this recall is R25. Note: This recall supersedes recall 14V817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.
Chrysler Group LLC (Chrysler) is recalling certain model year 2004-2005 Dodge Ram 1500, 2500, and 3500, 2004-2005 Dodge Durango, 2005 Dodge Dakota, 2005 Dodge Magnum and 2005 Chrysler 300, 300C and 300 SRT8 vehicles originally sold, or ever registered, in geographic locations associated with high absolute humidity. Specifically, vehicles sold, or ever…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passengers frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
Chrysler will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. For vehicles that were sold, or are currently registered, in Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, owners were notified and the recall began on December 5, 2014. For all other vehicles, Chrysler notified owners and the recall began on February 3, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P40 Expanded. Note: This recall has been superseded by recall 16V-352. This recall superseded the passenger air bag portion of recall 14V-354.
On certain pickup trucks, sport utility and passenger vehicles equipped with 42rle automatic transmissions, the cup plug that retains the park pawl anchor shaft may be improperly installed. if the shaft moves out of position, the vehicle may not be able to achieve 'park' position.
Risk and remedy
Risk
If this occurs and the parking brake IS not applied, the vehicle may roll away and cause a crash without warning.
Remedy
Dealers will inspect the transmissions and install a bracket to ensure the park pawl anchor shaft IS retained in the proper position. the recall began on november 28, 2005. owners may contact daimlerchrysler at 1-800-853-1403.
On certain passenger vehicles, the battery cable fasteners at the bulkhead stud may not have been properly tightened.
Risk and remedy
Risk
A loose fastener can cause an instrument panel fire.
Remedy
Dealers will tighten the bulkhead stud battery cable fasteners to the proper specification. owner notification began on july 6, 2004. owners should contact daimlerchrysler at 1-800-853-1403.
On certain passenger vehicles, a spot welding operation for the rear floorpan reinforcement may not have been performed.
Risk and remedy
Risk
This could cause the rear seat belt anchors and/or the child seat anchors to separate in certain crash conditions, which can increase the risk of injury to rear seat passengers.
Remedy
Dealers will inspect the rear floorpan reinforcement for missing welds and install structural rivets if necessary. owner notification began on july 6, 2004. owners should contact daimlerchrysler at 1-800-853-1403.
On certain passenger vehicles, the front shoulder belt adjustable turning loop (atl) bolts may not have been properly tightened.
Risk and remedy
Risk
This could cause shoulder belt separation in certain crash conditions, which can increase the risk of injury to front seat occupants.
Remedy
Dealers will tighten the shoulder belt adjuster turning loop bolts to the proper specification. owner notification began on july 6, 2004. owners should contact daimlerchrysler at 1-800-853-1403.
Owner complaints
638 complaints22 involved a crash9 involved a fire36 injuries1 deaths
What owners report most
Latest complaints
- Air bags
The contact owns a 2005 Dodge Magnum. The contact stated that while the contact's son was driving at an undisclosed speed, the driver's side air bag deployed without a crash. The vehicle was towed to the residence. The dealer was made aware of the failure. In addition, the contact was informed that…
The contact owns a 2005 Dodge Magnum. The contact stated that while the contact's son was driving at an undisclosed speed, the driver's side air bag deployed without a crash. The vehicle was towed to the residence. The dealer was made aware of the failure. In addition, the contact was informed that an unknown recall repair with a similar failure description was performed on the vehicle in 2016. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 215,000.
- Power train
The contact owns a 2005 Dodge Magnum. The contact stated that upon starting the vehicle, the vehicle failed to release and shift out of park(P). There were no warning lights illuminated. The contact stated that the failure was related to Customer Satisfaction Notification: K39 (Transmission Shift…
The contact owns a 2005 Dodge Magnum. The contact stated that upon starting the vehicle, the vehicle failed to release and shift out of park(P). There were no warning lights illuminated. The contact stated that the failure was related to Customer Satisfaction Notification: K39 (Transmission Shift Interlock Lever). The contact called the local dealer, but the vehicle was not diagnosed or repaired. The manufacturer was contacted and confirmed there was no coverage for the repair. The failure mileage was approximately 200,000.
- Power train
The contact owns a 2005 Dodge Magnum. The contact stated that while the vehicle was parked, the contact attempted to shift into drive; however, the gear shifter remained stuck in park. No warning lights were illuminated. The vehicle remained at the residence. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 113,000.
- Air bags
I have attempted to contact my local dealership several times to replace the airbags on this recall. They claimed months ago, stated “It’s on back order” and took my info claiming they’d contact me when the parts are in. They never contacted me. I keep attempting to make appointments with…
I have attempted to contact my local dealership several times to replace the airbags on this recall. They claimed months ago, stated “It’s on back order” and took my info claiming they’d contact me when the parts are in. They never contacted me. I keep attempting to make appointments with Lithia Chrysler Dodge Jeep Ram Fiat of Tri-Cities 7171 W. Canal Dr, Kennewick WA Recalls aren’t handled by a live person, just an automated message stating “we’ll get back to you soon” They don’t. I’ve been trying to get this replaced for a year. I would lien someone to contact Dodge or this dealership and ask them to stop hiding from mandatory recalls.
- Fuel/propulsion system
I have an 05 Dodge Magnum RT 5.7L Hemi, that intermittently stalls after filling the gas tank, and continues to do this until gas goes down a little. After dealing with/living with this problem for a while, I finally took my car to a shop and told them what was happening. They told me I needed to…
I have an 05 Dodge Magnum RT 5.7L Hemi, that intermittently stalls after filling the gas tank, and continues to do this until gas goes down a little. After dealing with/living with this problem for a while, I finally took my car to a shop and told them what was happening. They told me I needed to replace the right fuel pump module, which I did. This was 02/19/2016, at a cost of $287.94. The car had78,728 miles on the vehicle at this time. This did not fix the problem. I told the shop this, and I was told they couldn't find any other problem. After which I learned to live with it by not filling the tank up all they way. Recently I was not paying close enough attention when putting gas in, because I was washing my windshield. The car filled up until the pump clicked off. Upon leaving the gas station in morning rush hour traffic, my car immediately stalled. I was nearly rear ended. it took about 10 to 15 seconds to restart it. I was able to make the next green light to merge onto freeway, so I didn't need to slow down. (I should mention that the stalls only occur at slow speeds and stops, after the car has been filled with gas.) I had to slow way down to merge, and my car again stalled. I finally go it to start again only to have this happen 6 more times in stop and go traffic in 1 mile! Even though I was able to get to the right shoulder of the freeway until I could turn off, I caused major traffic delays. After telling a a co-worker about this, he told me he has the exact same car, which had the exact same problem. He then informed me there was an lifetime warranty to fix this problem, and his was fixed under this warranty a couple of months ago. I have found information regarding this warranty on-line, but nothing comes up when I enter my vin, even though it is the exact same year, make, and model of all the other cars that were fixed. I keep my car in top shape. It has no other issues than this...and I have been dealing with it since 2015!
- Tires
All 4 tires is less then 4 years old made on same date one tire has separate completely around the bead the others has started doing the same thing this car was my late wife’s car and I gave it to my daughter and she really takes care of it all maintenance is kept up that is how I found the problem…
All 4 tires is less then 4 years old made on same date one tire has separate completely around the bead the others has started doing the same thing this car was my late wife’s car and I gave it to my daughter and she really takes care of it all maintenance is kept up that is how I found the problem doing a break job on the car it looks like someone took a knife and cut the bead perfectly around the bead and the othe 3 is doing the same thing I took one tire back to discount tires where I got them and they have the really bad one All tires has the same code RBLF DD5R1120 ProTouring AS P215/65/R17
- Air bags · Power train · Seat belts
Airbag lights suddenly always on. Unknown if they are working or about to deploy. Hesitation in transmission while shifting, not sure if working properly. I haven't had any recalls fixed on this vehicle. It showed recalls and suddenly it shows all repaired. Is it due to the year?2005? Seat belts don't retract and are have to be manually maneuvered.
- Fuel/propulsion system
The malfunction to report is after fueling the vehicle will stall out. There is the sign of the fuel sending unit and fuel pump cycling after the ignition is turned on. This only occurs after topping off the fuel. The safety of operation is the stalling may occur while driving as well as at sitting…
The malfunction to report is after fueling the vehicle will stall out. There is the sign of the fuel sending unit and fuel pump cycling after the ignition is turned on. This only occurs after topping off the fuel. The safety of operation is the stalling may occur while driving as well as at sitting still. When driving and the vehicles stalls causes the steering wheel to stiffen and the must come to a complete stop, placed in park, turn off the ignition and wait for the possible reset. The problem has not been reviewed on my particular vehicle but has been reported by other 2005 Magnum owners. No other manufacturing process has inspected my vehicle. And there are no warning lights that come to indicate there is a problem.
- Fuel/propulsion system
Vehicle has stalled 3 times in past year and won't start back up. I have mechanic fix fuel pump and other related parts to fuel. It is very unsafe. The car just stalls driving and wants to start but dies on me.
- Fuel/propulsion system
I am experiencing an engine stall after filling the fuel tank. I have stalled after just leaving the gas station on main roads and even the highway when traffic IS at highway speeds of 65+. There have been no accidents to report to law enforcement so I dont have record of that. I called the local…
I am experiencing an engine stall after filling the fuel tank. I have stalled after just leaving the gas station on main roads and even the highway when traffic IS at highway speeds of 65+. There have been no accidents to report to law enforcement so I dont have record of that. I called the local dealer before to ask about the recall but they only said it was not on the list and I did not receive a call back. I would like to take my vehicle in for inspection. The issue has been happening for at least a few years (i dont have an exact time frame) but only this last year did the engine light come on. I had the code checked while the light was on and it was not for the aforementioned issue, so I dont think my vehicle IS registering the stalling.
- Air bags · Seat belts · Suspension
the other person jeep tires were sticking out my wife was blind sided by sun glare the only one hurt was my wife since jeep was parked outside on street she was the only one hurt since her right tire hit the jeep tire ,on other side of this narrow street was a plummers van ,the only damage was on…
the other person jeep tires were sticking out my wife was blind sided by sun glare the only one hurt was my wife since jeep was parked outside on street she was the only one hurt since her right tire hit the jeep tire ,on other side of this narrow street was a plummers van ,the only damage was on my wife very nice vehicle passenger side rim cracked and tire also my wife had to go to hospital with broken funny bone ,we only had liability insurance at that time, geico insurance didn't cover anything we had to pay for all medical bills which I'm still paying, dr. he's opinion seat belt or air bag cause her arm to break even now dr.needs to rebrake her arm again so it could heal right way CESAR CUEVAS 623-910-1708 EM:CEASAR213@MSN.COM ps she didn't have s.t.d. it put us behind 4months of bills and currently still paying thank you
- Engine · Fuel/propulsion system · Power train
The vehicle stalled during normal use traveling about 35 miles an hour right after an intersection. MY husband was able to safely make it off the road as we live in a small town he did this by feathering the accelerator pedal. He is a mechanic so he was able to get it home by lightly tapping the…
The vehicle stalled during normal use traveling about 35 miles an hour right after an intersection. MY husband was able to safely make it off the road as we live in a small town he did this by feathering the accelerator pedal. He is a mechanic so he was able to get it home by lightly tapping the pedal. If he pressed the pedal too hard the car stalled without warning so he lightly tapped on it and made it 2 blocks to our home where it has set in the driveway ever since. We spent over $1000 replacing parts such as the throttle body and the fuel pump and sending unit, egr, pcv, crankshaft sensor, plugs,injectors, intake seals, air intake temperature sensor and throttle body which include the throttle position sensor. Before we went for the cam sensor I decided to look up the issue and found so many with the same problem as us. We are veterans on a semi fixed income with a 10 month old daughter and this is our only vehicle we live in a super hot place in northern Arizona and can not afford further repairs as every part seems to be quite expensive. I don't have the fear of it dying while transporting my daughter again as it won't even stay started since the first incident. Additionally there are no codes or dash indicator lights staying on. We will be contacting Dodge in Kingman Arizona today.
- Engine · Forward collision avoidance › Warnings · Structure › Body
I was braking when the brakes didn't stop the tires and it slid into a curve.
- Engine · Fuel/propulsion system
When vehicle has been filled up with gas it will intermittently die until it has around 50 miles on it. Usually sputters and dies without warning leaving you with no steering or brakes. Will restart but die until some fuel is ran out. I have scheduled to have the gas tank replaced but the fee is around $150
- Electrical system · Forward collision avoidance › Adaptive cruise control · Power train
My pcm and tcm needs flash update I am a new owner on vehicle and The last owner has not gotten required updates
- Fuel/propulsion system
car stalls after fill up and it's in the middle of the road. won't clear up until gas goes down
- Air bags
The contact's wife owns a 2005 Dodge Magnum. The contact stated that his wife had received a recall notice for NHTSA Campaign Number: 16V352000 (Air Bags). His wife had taken the vehicle to the dealer to have the recall serviced; however, upon return of the vehicle, the passenger’s side air bag off…
The contact's wife owns a 2005 Dodge Magnum. The contact stated that his wife had received a recall notice for NHTSA Campaign Number: 16V352000 (Air Bags). His wife had taken the vehicle to the dealer to have the recall serviced; however, upon return of the vehicle, the passenger’s side air bag off warning light illuminated. His wife took the vehicle back to the dealer where she was informed that she had to pay a diagnostic fee for an inspection. The contact then notified the manufacturer and he was informed that if the diagnostic determined that the dealer was at fault for the failure, he would be reimbursed. The vehicle had yet to be repaired. The failure mileage was approximately 200,000.
- Engine
The contact owns a 2005 Dodge Magnum. The contact stated while driving at various speeds, the vehicle stalled after refueling. The contact stated that there was no warning light illuminated. The vehicle was not taken to the local dealer nor an independent mechanic to be diagnosed. The vehicle was…
The contact owns a 2005 Dodge Magnum. The contact stated while driving at various speeds, the vehicle stalled after refueling. The contact stated that there was no warning light illuminated. The vehicle was not taken to the local dealer nor an independent mechanic to be diagnosed. The vehicle was not repaired. The contact related the issue to an unknown recall. The manufacturer had not been informed of the failure. The failure mileage was approximately 98,478.
- Air bags
On around november late or beginning december of 2020 I come out of the store and my driver side airbag had deployed. at this time being unable to drive I got the car towed to a mechanic shop to see what could be done to make driveable. the mechanic said that it was a recall on the airbag and I…
On around november late or beginning december of 2020 I come out of the store and my driver side airbag had deployed. at this time being unable to drive I got the car towed to a mechanic shop to see what could be done to make driveable. the mechanic said that it was a recall on the airbag and I should take it to the dealership, but he fixed in order to make driveable. I took the car to the dealership and they replace the (fixed) the passenger side but didnt do the driver side because they said IS was for the deflater and not for the bag itself so they refused to fix it. so they want me to pay money on something that to me IS a manufacturer default. I think it IS unfair for me to be responsible for this repair.
- Fuel/propulsion system
Everytime I fuel up no matter how much fuel I put in my car will stall multiple times while I'm driving afterwards, including inside and intersection.
- Fuel system, gasoline
TL* the contact owns a 2005 dodge magnum. The contact stated that while driving at various speeds, the vehicle stalled without warning. The contact stated that the fuel tank needed to be full to prevent the vehicle from stalling. The contact noticed that the seal to the tank was leaking. The…
TL* the contact owns a 2005 dodge magnum. The contact stated that while driving at various speeds, the vehicle stalled without warning. The contact stated that the fuel tank needed to be full to prevent the vehicle from stalling. The contact noticed that the seal to the tank was leaking. The vehicle was taken to an independent mechanic where it was diagnosed that the control valve failed causing fuel to enter the purge line to leak and needed to be replaced. Hunter dodge chrysler jeep RAM fiat (1130 auto mall dr, lancaster, ca 93534) was contacted however, informed the contact that the vehicle needed to be diagnosed. The vehicle was not repaired. The failure recurred. The manufacturer was made aware of the failure and referred the contact to the dealer. The failure mileage was approximately 204,000.
- Unknown or other
I made a report a couple of days ago, I think I put it in wrong. My problem IS engine stalling while I am driving, I was informed that chrysler extended the warranty on its gas tank , indefinitely. they say the float sticks and causes the car to stall.
- Unknown or other
When I am driving car, it will stall while I am going 55 mph. Very dangerous. Happened repeatedly.
- Power train
TL* the contact owns a 2005 dodge magnum. The contact stated that the transfer case failed and caused the tires to skip and bounce. The contact repaired the vehicle himself. The contact removed the planetary gear clutch system and replaced the cap. The vehicle was repaired. The failure mileage was 60, 000.
- Air bags
My airbag warning light came on this morning. It comes on an goes off comes on and go off.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Rear Hatch Strut Support Failure
See Attached Closing Report.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10229256KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10229181Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
- 10223602Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221686KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220840Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10218816Engine Stall Immediately Following Fuel Tank Fill-Up (X53 Lifetime Warranty Extension) This bulletin involves replacing the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated..
- 10191460Valve Body. These may cause over drive cycling.
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10121927NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
- 10062714Summary to be provided on a future date.
- 10055479When fuel tank fill-up, the engine stalls immediately. 6/03/2014*Lj
- 10021599Passenger air bag deactivation.
- 10021239Powertrain control module initialization.
- 10021238Malfunction indicator lamp (mil) on for p0573.
- 10020544Rear of sunroof glass IS not flush to roof/sunroof will not close.
- 10020541Delayed engine crank or mil illumination with dtc p0573.
- 10020092Flash: mil illumination at start-up due to dtc p2112 or p1521.
- 10019943Due to a software issue in the fcm, some vehicles may exhibit illuminated approach, fog lamps and/or rear wiper operation.
- 10019740Generic powertrain control module (pcm) procedure.
- 10019533Moan/groan sound heard at idle.
- 10018981Multiple cylinder misfire or rough idle.
- 10017651Revised power steering system bleeding procedures.
- 10017629Transfer case shudder.
- 10016925Malfunction indicator lamp (mil) illumination, diagnostic trouble codes (dtcs) p0037, p0058, p0131, p0132, p0133, p0138, p0151, p0153, p0159.
- 10016695Seat belt tightening down while driving - before replacing the seat belt retractor.....
- 10016585Clicking sound from rear of vehicle after accelerating from a stop.
- 10016171Daimlerchrysler corporation IS now offering a passenger airbag deactivation wiring package. To include 2006 chrysler town and country and 300/touring.
- 10016027Shift hesitation during wide open throttle. To include 2005 dodge charger SRT-8.
- 10015066NAG1 (w5a580) transmission - shudder when torque converter clutch engages.
Every Dodge Magnum model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.