2021 Fccc MT55
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2021 Fccc MT55. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2021 Fccc MT55. Newest first.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2019 Freightliner Custom Chass XCL, 2017-2022 XCM, XCS, 2017-2023 MC, XCR, 2018-2019 XBR, 2018-2020 XBS, 2018-2022 MBC, MT55, S2C, S2G, S2RV vehicles. The tire valve stem extension for the inner wheel may come into contact with the outer wheel rim opening and become damaged.
Risk and remedy
Risk
Damage to the valve stem extension may result in a loss of tire pressure of the inner wheel, increasing the risk of a crash.
Remedy
Dealers will remove the inner valve stem extensions and stabilizers, free of charge. Owner notification letters were mailed January 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL912. Note: This recall supersedes and expands recall 20V-529 (FL-861). Vehicles previously repaired under 20V-529 will need to have the new remedy completed under this recall.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner Cascadia, Business Class M2, 114SD, 108SD, 122SD, Custom Chass S2 Chassis, Custom Chass XB Chassis, Custom Chass XC Chassis, and Custom Chass MT Chassis Western Star 4700, 4900, 5700 vehicles. The steering arm and tie rod bolts may have a defective seam that can fracture.
Risk and remedy
Risk
A fractured bolt may cause a loss of steering, increasing the risk of a crash.
Remedy
DTNA will notify owners, and dealers will replace the tie rod arm and steering arm bolts, free of charge. The recall began on June 10, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-884.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021 Freightliner Custom Chassis MC, Business Class M2, Custom Chassis MBC Chassis, Custom Chassis S2 Chassis, Custom Chassis MT55 Chassis, and 2022 Custom Chassis Saf-T-Liner C2 vehicles. The hydraulic caliper tie bar support fasteners on the steer axles may not have been properly tightened or…
Risk and remedy
Risk
A dangling tie bar could come in contact with the rotating wheel-end components or damage may occur from the brake parts flexing. Either scenario may increase the risk of a crash.
Remedy
DTNA will notify owners, and dealers will inspect both steer axle wheel-ends to make sure that the four tie bar mounting fasteners are properly tightened. If the required tie bar is missing, the caliper anchor mounts and functionality (brake pad slide pins and pad movement) will be inspected before installing a tie bar. All repairs will be performed free of charge. The recall began February 18, 2021. DTNA's number for this recall is FL-871.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010186CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
- 11008498Important Campaign Information for FL997 Emissions Recall Campaign Suspended
- 11005481Emission Recall for FCCC Clean Idle Label
- 11005474Emission Recall for FCCC Clean Idle Label
- 11005460Emission Recall for FCCC Clean Idle Label
- 11000988My Communications for SSI DEF Header Warranty Policy Extension for B6 7 Engines Model Years 2017-2021
- 10253878Extended Warranty Policy for certain Cummins B6.7 engines with SSI DEF headers for EPA and CARB Emissions Reporting
- 10251202Important Campaign Information letter for FL974 - Revised Bulletin & Population
- 10251200Revised Emissions Recall: Cummins DEF Sensor Shortage. REVISION: Some vehicles formerly in Group F have been moved to Group G and have been assigned a new part number as specified in Table 1. An SRT for 'Calibration Code Only: Update or Confirm' has been added, as shown in Table 2, to be used when a new DEF header is not required. There have been some other minor changes to the work instructions and SRT times.
- 10249516Emissions Recall: Cummins DEF Sensor Shortage
- 10189319Warranty Policy Letter for battery tags. DTNA determined that since adopting the AutoMeter BCT-460DTNA Powernet Assessment Tool (AutoMeter) as the required powernet system tester, not all battery tags have to be retained support Warranty-related claims.
- 10187835Starting on November 23, 2020, DiagnosticLink 8.13 (Build 4527) was made available. Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10185928Updated Service Solution for 6.0l Gas Engine With Low Oil PSI. Certain FCCC vehicles equipped with a 6.0l GM gas engine may experience a complaint of low oil pressure indication on the instrument panel.
- 10184786FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
- 10184034Service Bulletin for Interlube Leak at the Injectors. Some walk-in vans equipped with an Interlube Chassis Lubrication System may experience leaks at the lubrication injectors. The injectors may not have been tightened properly.
- 10181761Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
- 10177692Technical Service Letter for EPA10, GHG14, GHG17 Diesel Particulate Filter (DPF) Compatibility. Note: This document supersedes 14 TS-25 and 15 TS-8. Detroit Diesel has determined that some, Diesel Particulate Filters (DPFs) are compatible in pairs and or can be mixed together within EPA10 and GHG14 Systems. For 1-BOX and Two-Box Configuration Aftertreatment Systems (ATS), this is only possible when the filters are used in accordance with Tables 1 and 2 shown below. All other DPFs, NOT mentioned below, are NOT compatible.
- 10177691OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10177690Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLink 8.12 Standard and Professional is available to download from the Detroit Diesel server.
- 10177657Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020.
- 10176790Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.
Every Fccc MT55 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.