Daimler Trucks North America LLC (Daimler) is recalling certain model year 2014-2015 Freightliner 122SD, Argosy, and Cascadia trucks manufactured July 22, 2013, to October 13, 2014, equipped with Wabco Quick Release Valves with Double Check manufactured February 6, 2013, to April 19, 2014. The affected vehicles may have been produced with a defective valve…
Risk and remedy
Risk
Improper seating can result in the valves improperly adjusting air pressure levels, thereby reducing the braking performance of the vehicles and increasing the risk of a crash.
Remedy
Daimler will notify owners, and dealers will inspect, and replace the valves, free of charge. The recall began on December 30, 2015. Owners may contact Daimler customer service at 1-800-745-8000. Daimler's number for this recall is FL-673.
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014 Freightliner 108SD, 114SD, 122SD, Coronado, Argosy, Cascadia, Columbia, and M2 Business Class, and Western Star 4700, and 4900 vehicles manufactured August 5, 2013, through November 15, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release…
Risk and remedy
Risk
If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
Remedy
DTNA will notify owners, and dealers will inspect and replace the seat belt buckle, as necessary, free of charge. The recall began on May 22, 2014. Owners may contact Daimler at 1-800-385-4357. DTNA's number for this campaign is FL-661. Note: This is an expansion of recall 13V-604.
Daimler Trucks North America (DTNA) is recalling certain model year 2014 Freightliner 108SD, 114SD, 122SD, Coronado, Argosy, Cascadia, M2 Business Class, and Western Star 4700, 4900, and 6900 vehicles manufactured August 5, 2013, through November 15, 2013; and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat…
Risk and remedy
Risk
If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
Remedy
DTNA will notify owners, and dealers will inspect and replace the seat belt buckle, as necessary, free of charge. The recall is expected to begin by January 26, 2014. Owners may contact Daimler at 1-800-385-4357. DTNA's number for this campaign is FL-654.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
10195659SS 1032974 High Oil Pressure on 2017 DTNA Vehicles Instrument Cluster Display
10190551Warranty Information letter announcing that DTNA is increasing the Standard Diagnostic Times (SDTs) shown. The updated after treatment system (ATS) diesel exhaust fluid (DEF) pump times will be applied to repair orders opened on or after April 12, 2021.
10190549Warranty Information Letter announcing DTNA is adjusting the Standard Repair Times (SRTs) shown. The updated times will be applied to repair orders opened on or after April 5, 2021.
10184785Revised Freightliner Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Revision removed steps instructing removal and installation of wheels. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
10181759Updated Freightliner Service Bulletin for Powernet Troubleshooting Guide - Batteries, Path, Alternator, and Starter. This bulletin replaces the version dated 5/31/2017. Information is added about the BCT-460DTNA PowerNet Assessment Tool. When troubleshooting Powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
10181049Freightliner Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
10180081Tech Talk Discussion for DD15 GHG14 EGR linkage hex nuts.
10173894Service Bulletin for Lengthening the Backup Light Harness. Though the backup light harness is long enough to connect to the backup light switch, it may be short enough that the wire seals in the connector can be stressed. Moisture entering through the seals can cause corrosion, resulting in a bad connection and/or failure of the switch. As a result, backup lights and, if equipped, the backup alarm, may not function when the vehicle is shifted into reverse.
10168135Service Bulletin revision for window regular refit. Argosy is now included as an applicable vehicle. This version replaces the previous version dated 9/27/19.
10166792Important Campaign Information notice for field service campaign D18M3 being revised which added additional repair information,
10166787Field Service Campaign Revision for heavy duty engine platform oil suction manifold. Additional repairs section added.
10164441Revised Field Service Campaign for Heavy Duty Engine Platform Oil Suction Manifold on DD3, DD15, DD16 Engines for Model Year 2014
10163599Warranty Information Letter sent to customers regarding new refrigerator supplier for returning parts.
10163511Warranty Information Letter - Expanded guidelines for paint-related claims sent out to Freightliner, Western star, Thomas Built Bus, Export and Direct warranty customers
10146290If a GVWR certification label is lost or damaged, Freightliner will supply a duplicate label. Log on to DTNAConnect.com and under "DTNAConnect Resources", select the "Tool and Services" plus sign. Select "Request for Certification Label or OWI." Fillout the form, then select "Review."