2020 Genesis G80
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Genesis › G80 › 2020
These records cover every 2020 Genesis G80. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2020 Genesis G80. Newest first.
Hyundai Motor America (Genesis) is recalling certain 2015-2016 Hyundai Genesis, and 2017-2020 Genesis G80 vehicles. The front power seat motors may overheat due to a stuck power seat control switch, which can result in a fire while parked or driving.
Risk and remedy
Risk
A fire increases the risk of injury.
Remedy
Owners are advised to park their vehicles outdoors and away from other vehicles or structures until the repair has been performed. The remedy is currently under development. Owner notification letters are expected to be mailed December 7, 2026. Owners of Hyundai vehicles may contact Hyundai customer service at 1-855-371-9460. Genesis owners may contact Genesis customer service at 844-340-9741. Hyundai recall number for this recall is 308 and Genesis' recall number is 035G. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning October 13, 2026.
Hyundai Motor America (Hyundai) is recalling certain 2018-2020 Genesis G80, 2017-2022 G90, and 2019-2022 G70 vehicles equipped with a 3.3-liter V6 turbocharged engine. The left turbocharger oil feed pipe may deteriorate and leak oil.
Risk and remedy
Risk
An oil leak in the presence of hot engine components can increase the risk of an engine compartment fire.
Remedy
Dealers will replace the left turbocharger oil feed pipe, free of charge. Owner notification letters were mailed May 3, 2024. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 019G. This recall expands and replaces recall number 19V-538. Vehicles previously repaired under 19V-538 will need to have the new remedy completed.
Hyundai Motor America (Hyundai) is recalling certain 2015-2016 Genesis and 2017-2020 Genesis G80 vehicles. The Anti-Lock Brake System (ABS) module could malfunction and short circuit.
Risk and remedy
Risk
An electrical short circuit inside the ABS module could cause an engine compartment fire while parked or driving.
Remedy
Owners are advised to park outside and away from structures until the remedy is complete. Hyundai will notify owners, and dealers will replace the ABS module fuse, free of charge. Owner notification letters were mailed July 6, 2021. Owners can contact Hyundai customer service at 1-855-371-9460. Hyundai's numbers for this recall are 201 and 006G.
Owner complaints
11 complaints1 involved a crash
What owners report most
Latest complaints
- Power train
I am reporting a recurring transmission/drivetrain problem that I believe may warrant investigation for a potential safety defect. Beginning in approximately May 2026, my vehicle developed a pronounced hard bump/jerk and shudder during transmission operation. The problem initially occurred…
I am reporting a recurring transmission/drivetrain problem that I believe may warrant investigation for a potential safety defect. Beginning in approximately May 2026, my vehicle developed a pronounced hard bump/jerk and shudder during transmission operation. The problem initially occurred primarily in 3rd, 4th and 5th gears and became more noticeable after the vehicle warmed up. The condition was significant enough that I took the vehicle to Genesis of Columbia/Silver’s Hyundai for diagnosis. On June 1, 2026, at approximately 90,223 miles, the dealer documented that they had “verified concern” and that the “transmission needs to be replaced due to internal failure.” The transmission replacement was initially declined by my vehicle service contract administrator, and only the torque converter was authorized. The dealer replaced the torque converter but documented that the condition was only more intermittent and that the vehicle “will still need transmission as originally diagnosed.” In August/September 2026, the transmission and torque converter were replaced but bump remained. The dealer then identified a bent front propeller shaft and replaced that as well. The vehicle continued to have drivetrain-related bump as before causing problems with acceleration. The dealer later raised a concern about different tire tread depths/patterns for first time after 8 weeks.The tires were the tires that came on the vehicle when I purchased it. The dealer told me that the tire condition “could cause a problem later.” I subsequently had the tires measured elsewhere, with tread depths of approximately 5/32” and 8/32” on two tires. I purchased 4 new tires and the problem got worse Of particular concern, a dealer employee also told me by text that they had “other G80 here with same problem that need transmissions.” I am not claiming that this statement establishes how many vehicles are affected only information that may warrant further investigation.
- Service brakes
Parking vehicle at 5MPH brakes did not work, and car shot forward-hit steel post.
- Unknown or other
Unknown air conditioner works well for about 1 hour, then suddenly there's a funny noise and the heat comes out instead of cold air. We have informed genesis dealer about the problem, but they said it would not be covered under warranty. We have seen multiple reports of this issue but genesis has not issued a recall for this potentially dangerous and hazardous problem.
- Unknown or other
There is a recall on my 2020 Genesis g80 3.3t regarding a faulty turbo oil feed pipe causing the car to leak oil and a safety risk that could cause a fire. Vehicle had no issues prior to me having towed to Genesis north of Cincinnati other than the supply pipe leaking oil. The next day after them…
There is a recall on my 2020 Genesis g80 3.3t regarding a faulty turbo oil feed pipe causing the car to leak oil and a safety risk that could cause a fire. Vehicle had no issues prior to me having towed to Genesis north of Cincinnati other than the supply pipe leaking oil. The next day after them performing repairs on my vehicle I receive a text as well as an email stating that my service is complete. In the text message it states that my car is complete and is ready to be picked up but the car is now leaking coolant and the oil leak is not repaired. Genesis did not properly repair the issue and is still leaking oil. Repair includes work done to the coolant system being bled annd refilled with coolant . Now my car is also leaking coolant after them attempting repairs
- Unknown or other
AC stops working while driving on hot days, airflow stops and the situation is very dangerous. Tried to get the dealer to fix it, to no avail. I've been dealing with this dangerous (temperatures reached more than 110 F, without airflow) problem for two years. We are more than 20 owners of these luxury cars experiencing the same problem. I can provide their names and VINs upon request.
- Unknown or other
AC stops running during very hot days, air flow stops and heat inside the car gets dangerously high. There are multiple complaints about this in a Genesis blog, and dealers are unable to reproduce the problem to find the problem. I contacted Genesis America and they cannot do anything because…
AC stops running during very hot days, air flow stops and heat inside the car gets dangerously high. There are multiple complaints about this in a Genesis blog, and dealers are unable to reproduce the problem to find the problem. I contacted Genesis America and they cannot do anything because service technicians are unable to diagnose the problem. Genesis MUST do something about this. I can provide snapshots of the blog with the multiple complaints. This started sometime in the 2023 summer.
- Electrical system · Engine · Service brakes
It is dead everyday and I have to jump it I noticed when I attach a power source it makes very odd noises. I feel the current recall you have on the g80 2020 may be the issue. It runs extremely hot wit no warning lights showing. I have had a lot of brake dust and the car is hot fast. Also issues…
It is dead everyday and I have to jump it I noticed when I attach a power source it makes very odd noises. I feel the current recall you have on the g80 2020 may be the issue. It runs extremely hot wit no warning lights showing. I have had a lot of brake dust and the car is hot fast. Also issues with usb and when connected to phone it sound like crackling and volume sounds odd unless I unplug and replug. Replaced battery twice in a year
- Electrical system
The contact owns a 2020 Genesis G80. The contact stated that upon starting the vehicle, the check engine warning light was illuminated. The vehicle was taken to the dealer where it was diagnosed that rodents had chewed through the soy-based wire coating. The vehicle was repaired; however, the…
The contact owns a 2020 Genesis G80. The contact stated that upon starting the vehicle, the check engine warning light was illuminated. The vehicle was taken to the dealer where it was diagnosed that rodents had chewed through the soy-based wire coating. The vehicle was repaired; however, the failure reoccurred. The vehicle was taken back to the dealer who provided the same diagnostic and repaired the vehicle; however, the failure persisted. The vehicle was taken back to dealer where it was diagnosed that rodents had also chewed through the starter wiring. The vehicle was repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 12,000.
- Service brakes
We took the vehicle in for the ABS recall on the 2020 Genesis G80 [XXX] The Dealer changed the Fuses and told me the fuses where changed from a 10 amp to a 20 amp fuse. This seems to be the wrong way to go for a defective ABS module. Then they told me it is ok to park the car in the garage. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Tires › Sidewall
The contact owns a 2020 Genesis G80 Equipped with Continental tires, Tire line ProContact Rx. Tire size 275/35R19, Dot number afbnd7vn2419, these two tires were located at the rear passenger side and the rear driver’s side. The contact also wanted to note that the passenger front side and the…
The contact owns a 2020 Genesis G80 Equipped with Continental tires, Tire line ProContact Rx. Tire size 275/35R19, Dot number afbnd7vn2419, these two tires were located at the rear passenger side and the rear driver’s side. The contact also wanted to note that the passenger front side and the driver’s front tires also failed those tires were also Continental tires, Tire line ProContact Rx, tire size 245/40R19, the Dot number was not available. The contact 275/35R19 tires blew when a pothole was hit, and the tires also exhibited cuts these tires failures occurred on two separate occasions. The 245/40R19 tires also blew when pots holes were hit on the road and the tires exhibited cuts the contact also wanted to note that these tires failed on the third occasion.
- Tires
The vehicle has 11,000 miles on it. I just drove from Boston, MA to Scranton, PA on Thursday 6/24/21. There were no issues and I did not hit any pot holes. On Friday morning we started driving and 3-4 miles away going about 40 mph, we noticed a problem on the right front. I pulled over and we…
The vehicle has 11,000 miles on it. I just drove from Boston, MA to Scranton, PA on Thursday 6/24/21. There were no issues and I did not hit any pot holes. On Friday morning we started driving and 3-4 miles away going about 40 mph, we noticed a problem on the right front. I pulled over and we noticed the tire was flat. I called triple A and took the car to a tire repair shop. The sidewall was worn all around the perimeter of the tire and it had a hole in the sidewall. I also noticed a bubble on the left front tire, thus both tires were replaced. I notified Continental and opened a claim with them.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Hyundai and Kia ABS Module Fires
The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by…
The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by the equipment supplier Mando. The Part 573 Recall Reports contain varying defect descriptions and differing remedy descriptions for the same or similar equipment supplied by Mando. Safety recalls included in this Audit Query (AQ) review include: Hyundai recalls 20V-520, 20V-543, 21V-161, 21V-160, 21V-303, 22V-056, 22V-810, and 23V-651. Kia recalls 16V-815, 20V-518, 20V-519, 21V-137, 21V-331, 22V-051, 22V-800, and 23V-652 The purpose of this AQ is to evaluate the timeliness and scoping of Hyundai and Kia’s defect decision making and adherence with reporting requirements; and understand the varying defect descriptions and remedies between these recalls.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11009768Certain GV70 (JK1, JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a hum or whine noise condition from the rear differential at certain speeds. This bulletin describes the procedure to inspect the vehicle for the hum or whine noise and if necessary to tighten the rear differential lock nut first. If the hum or whine noise remains, then replace the rear differential or other driveline components as necessary.
- 11006825This bulletin provides information to inspect and replace the front or rear wheel bearing hub assemblies for all Genesis vehicles. This procedure is applicable when noise (whirring, roaring, grinding, rumbling, etc.) is present which gets louder when driving with more speed.
- 10253053This TSB provides consolidated diagnosis and repair information, currently in the shop manual, to address DTC U0109 / U010900 related to a communication error with the Fuel Pump Control Module (FPCM).
- 10253049Genesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10253048This TSB provides a procedure to diagnose and repair a transmission for the following Incorrect Ratio DTC (transmission clutch slipping more than 200 rpm in gear).
- 10253046Certain 2019-2020 G80 (DH) vehicles may have a condition where the seat backboard comes loose. This bulletin describes the procedure to replace the seat backboard clip.
- 10253043This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
- 10253042This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. Before replacing an automatic transmission: Input the data into the TCU using the GDS. Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
- 10253038This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
- 10253036The bulletin describes the procedure to measure and set propeller shaft angles to optimize driveline vibration performance on certain 2019-2020MY 3.8L AWD G80 (DH) vehicles.
- 10253034Some vehicles may experience seat noise and/or possible wobble movement from the seat bottom when the vehicle is turning. This bulletin describes the procedure to install an e-ring clip to the tilt pipe housing on the front seat.
- 10253033Certain 2019-2020 G80 (DH) vehicles may have a condition where the seat backboard comes loose. This bulletin describes the procedure to replace the seat backboard clip.
- 10253032This bulletin describes the procedure to inspect and if necessary repair brake pulsation on Genesis vehicles.
- 10253031Certain vehicles (listed below) equipped with the HomeLink5 (Two Way Communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms.
- 10253029Some vehicles may experience seat noise from seat bottom when vehicle is turning. This bulletin describes the procedure to install an e-ring clip to the tilt pipe housing on the front seat.
- 10253028This bulletin describes the procedure to replace the seat backboard clip. Some vehicles may experience the seat backboard coming loose.
- 10253026If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
- 10253025This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
- 10253024When servicing a vehicle with a Check Engine light and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
- 10253013This bulletin describes the procedure to install an Audio Video Navigation (AVN) software update which repairs a condition in which the radio presets may reset during AVN start up.
- 10238384When servicing an 8-speed automatic transmission vehicle with a Check Engine light and any of the DTCs listed below, follow the Service Procedure and, if necessary, replace the E-module.
- 10238378Certain 2017-2020MY G80 vehicles may exceed evaporative emissions standards due to Onboard Refueling Vapor Recovery (ORVR) system. To correct this symptom, install an auxiliary canister assembly between the canister and Canister Close Valve (CCV).
- 10235568Certain 2017-2020MY G80 vehicles may exceed evaporative emissions standards due to Onboarding Refueling Vapor Recovery (ORVR) system. To correct this symptom, install an auxiliary canister assembly between the canister and Canister Close Valve (CCV).
- 10235567Certain 2017-2020MY G80 vehicles may exceed evaporative emissions standards due to Onboard Refueling Vapor Recovery (ORVR) system. To correct this symptom, install an auxiliary canister assembly between the canister and Canister Close Valve (CCV).
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10233543When servicing a vehicle with a Check Engine light and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
- 10230903This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.
- 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
- 10183960This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
Every Genesis G80 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.