2022 Genesis G90
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Genesis › G90 › 2022
These records cover every 2022 Genesis G90. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2022 Genesis G90. Newest first.
Hyundai Motor America (Hyundai) is recalling certain 2022-2023 Genesis GV70, GV80, G80, and G90 vehicles. The fuel pump may fail, which can result in a loss of drive power.
Risk and remedy
Risk
A loss of drive power can increase the risk of a crash.
Remedy
Dealers will inspect and replace the fuel pump assembly, free of charge. Owner notification letters were mailed June 7, 2024. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 022G. This recall is an expansion of recall number 23V-630.
Hyundai Motor America (Hyundai) is recalling certain 2018-2020 Genesis G80, 2017-2022 G90, and 2019-2022 G70 vehicles equipped with a 3.3-liter V6 turbocharged engine. The left turbocharger oil feed pipe may deteriorate and leak oil.
Risk and remedy
Risk
An oil leak in the presence of hot engine components can increase the risk of an engine compartment fire.
Remedy
Dealers will replace the left turbocharger oil feed pipe, free of charge. Owner notification letters were mailed May 3, 2024. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 019G. This recall expands and replaces recall number 19V-538. Vehicles previously repaired under 19V-538 will need to have the new remedy completed.
Owner complaints
4 complaints
What owners report most
Latest complaints
- Unknown or other
In June 2026, after warranty repairs were performed on the vehicle's navigation/display system, a new safety-related problem occurred. When the vehicle is shifted into reverse, the rearview/backup camera image does not appear on the display. Instead, the navigation map remains on the screen. The…
In June 2026, after warranty repairs were performed on the vehicle's navigation/display system, a new safety-related problem occurred. When the vehicle is shifted into reverse, the rearview/backup camera image does not appear on the display. Instead, the navigation map remains on the screen. The vehicle has been at an authorized Genesis dealership since June 4, 2026, and the backup camera problem remains unresolved. The dealership has reproduced and confirmed the problem. According to the dealership, it requested authorization from Genesis to replace the backup camera, but the request was not approved. The dealership later requested authorization to replace the wiring harness, but that request was also not approved, and the part was not ordered. I was told that Genesis has continued attempting to address the problem through software. The dealership also advised me that similar issues have been reported with other vehicles of the same model, although I cannot independently verify those cases. This creates a safety concern because the rearview camera does not provide a view of the area behind the vehicle when it is shifted into reverse, increasing the risk of striking a person, vehicle, or object while backing up. The vehicle remains available at the authorized Genesis dealership for inspection. As of August 20, 2026, it has been out of service for 78 days and no confirmed repair solution has been provided.
- Back over prevention › Warnings · Electrical system · Engine
About every 45 days the car will not turn off. Safety items like the rear view camera will not work. The main viewing screen will go dead. I called the dealership. They said this was a common problem with my car. The only fix is to attempt a full system reboot with a paper clip. This has now happened three times to me. Once the car started without me pushing the start button. Twice while I was driving.
- Seats
Seat memory #1 was working when I purchased the vehicle on 9/30/2021. Meaning as I got into and started the vehicle the seat automatically went into the correct driver's position to safely drive the vehicle. It was later learned that one of the options on the vehicle was an easy out feature.…
Seat memory #1 was working when I purchased the vehicle on 9/30/2021. Meaning as I got into and started the vehicle the seat automatically went into the correct driver's position to safely drive the vehicle. It was later learned that one of the options on the vehicle was an easy out feature. Meaning the seat would move back all the way so the driver could easily exit the vehicle. The seat at this time did not go back all the way. So, the dealership installed the new part on April 6, 2022, to correct the easy out feature. After the new part was installed the seat memory for #1 would not work at all as before. Meaning the seat would not go into the number #1 position to drive the vehicle safely. Also, the new part after the installation did not correct the easy out situation either meaning the seat will not move all the way back at all for an easy out. Now when I get out of the vehicle, I have to manually repeat manually move the seat all the way back and down to force myself repeat force myself to hit the number #1 seat position when I get back into the vehicle to reset the seat in order to safety drive the vehicle. The dealership has said per Genesis the seat is operating as designed. I was not informed of this design flaw when I purchased the vehicle and if I was, I never would have purchased the vehicle.
- Forward collision avoidance › Software › Pedestrian/cyclist/object/obstacle/ recognition
Hello. We came within one foot of running over a jogger and had pedestrian avoidance activated. I read the owners manual and found disclaimer that PA does not work in dark and for other scenarios. The PDA is essentially a daytime pedestrian avoidance and does not work half the day. Indeed many…
Hello. We came within one foot of running over a jogger and had pedestrian avoidance activated. I read the owners manual and found disclaimer that PA does not work in dark and for other scenarios. The PDA is essentially a daytime pedestrian avoidance and does not work half the day. Indeed many other safety features such as lane keep assist do not perform as sales people disclosed. There needs to be much better disclosure (such as with medications) about limitations of new safety features. I specifically said the reason I was buying a car was to update safety, especially PDA to avoid my grandkids, bikes and joggers. I was not fully disclosed. Many might trade-in cars to update to new features to include those who can barely afford a new car. Then become trapped due to "drive off the lot" depreciation and cannot afford a car which does perform as needed. They may be better served by waiting another year or so until PDA etc would perform as they should. I am blessed and can afford to withstand the "hit." Agree that safety features are a step in the right direction and is new territory for regulation We must in my opinion have regulations for full disclosure of safety features limitations before a sale is made. We do not all read the owner's manual before purchase and do rely on truthful sales people. Safety is not a "buyer's beware" territory. The car I purchased happened to be a Genesis, but I think this is a problem across many manufacturers. I used to do forensic pathology and know fully well what traffic safety is about. Thank you for listening. I am not writing this for any personal reason as this was a near miss with no damage done. This I think is a general problem and just wanted for your agency to have increased awareness. [XXX] MD INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11006825This bulletin provides information to inspect and replace the front or rear wheel bearing hub assemblies for all Genesis vehicles. This procedure is applicable when noise (whirring, roaring, grinding, rumbling, etc.) is present which gets louder when driving with more speed.
- 10253049Genesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10253048This TSB provides a procedure to diagnose and repair a transmission for the following Incorrect Ratio DTC (transmission clutch slipping more than 200 rpm in gear).
- 10253043This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
- 10253042This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. Before replacing an automatic transmission: Input the data into the TCU using the GDS. Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
- 10253038This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
- 10253031Certain vehicles (listed below) equipped with the HomeLink5 (Two Way Communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms.
- 10253026If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
- 10253025This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
- 10253024When servicing a vehicle with a Check Engine light and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
- 10253020Fuel cap inspection and replacement (service campaign T21G)
- 10238384When servicing an 8-speed automatic transmission vehicle with a Check Engine light and any of the DTCs listed below, follow the Service Procedure and, if necessary, replace the E-module.
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10233543When servicing a vehicle with a Check Engine light and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
- 10230903This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.
Every Genesis G90 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.