2001 Geo Metro
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2001 Geo Metro. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
6 complaints2 involved a crash2 injuries
What owners report most
Latest complaints
- Air bags › Frontal
Dt: a 2001, geo, metro. Contact's vehicle was involved in an accident, it was hit in the rear. upon impact, air bags did not deploy. Vehicle was totaled. *Ak
- Equipment › Appliance › Air conditioner
I bought a 2001 chevrolet metro for my daughter in june of 2002 with a 3 year or 35,000 mile warranty carrying forward with the purchase. at the time the odometer read 33,374. the air conditioner did not work in june of 2003 and the compressor had to be replaced with a bill of $1,156.63. the car…
I bought a 2001 chevrolet metro for my daughter in june of 2002 with a 3 year or 35,000 mile warranty carrying forward with the purchase. at the time the odometer read 33,374. the air conditioner did not work in june of 2003 and the compressor had to be replaced with a bill of $1,156.63. the car mileage was slighly over 35,000 so was out of warranty. on may 8, 2004 (less than 1 year later), the air conditioner does not work again. the compressor IS fine but now there are leaks at two lines high and low. the price to fix this problem IS $750. this car IS only four years old and has already had two problems with the air conditioner. when the compressor was replaced in 2003, the mechanic stated that he was starting to see chevy metros with this problem and was surprised that a recall had not been made.*ak
- Power train › Automatic transmission · Visibility › Defroster/defogger/hvac system › Rear window
The vehicle started off in third gear. the dealer did not specify what components of the automatic transmission had to be replaced. also, rear defroster stopped operating, causing poor visibility to the driver. *Ak
- Visibility › Defroster/defogger/hvac system › Rear window
Vehicle did not have rear defroster. manufacturer was contacted, consumer was told that was the way the vehicle was manufactured.*ak
- Visibility › Defroster/defogger/hvac system › Rear window
The vehicle did not come equipped with a rear defroster. *jb
- Service brakes, hydraulic › Foundation components
Consumer was traveling about 65mph on highway and another vehicle cut him off. consumer applied brakes to slow down, and lost control of vehicle. then, he hit center divider. he was injured slighly. he will contact manufacturer.*ak
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
- 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
- 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10249590This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
- 10249011This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
- 10248444Vehicle Recalls
- 10247681Information On Requests To Add OnStar Bluetooth Option.
- 10247552This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
- 10246952Programming And Activation Of Replacement OnStar Modules.
- 10246951Programming And Activation Of Replacement OnStar Modules.
- 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
- 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
- 10245950Canadian Customers Unable To Place Calls In The United States
- 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10244201This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10242843The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
- 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 10235799This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10234110This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
- 10232136This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
- 10228888This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
- 10227056This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10225615This service bulletin provides information on Module Harvesting.
- 10224820This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10222839This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada.
- 10222796This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10220319This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
- 10219266This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
- 10214869This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10209980This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10209921This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10190934Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
- 10190933Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
- 10190932Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
- 10190931Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
- 10190512OnStar Voice Fallback Number Update Some customers may have received a letter from OnStar stating that "We recently tried to provide a software update to the OnStar hardware in your vehicle. However, your system could not be updated remotely. As a result, some of your OnStar system functions may not be working as expected." The customer is further instructed in this letter to "Please contact your dealer or any dealer near you as soon as possible to schedule an appointment for this no-cost software update. Your dealer will reprogram your OnStar module with an update. This is for vehicles that have previously received the Canada upgrade as described in Service Bulletin #15-08-44-001F."
Every Geo Metro model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.