1996 GMC C25
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1996 GMC C25. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
5 recalls name the 1996 GMC C25. Newest first.
Vehicle description: extended cab and 2-door utility vehicles equipped with reclining seats and the easy-entry feature. these vehicles exhibit a condition in which a pinch point exists in the recliner mechanism that can trap and pinch a person's hand or finger(s) when the easy-entry feature IS activated.
This pinching can cut the hand or possibly sever the finger(s) without prior warning.
Dealers will install a protector cover over the recliner mechanism.
The four u-bolts nuts on either side of the rear axle were under-torqued.
Vehicle usage could cause the nuts to loosen and eventually fall off the u-bolt. This could result in sudden loss of vehicle control increasing the potential for a vehicle crash.
Dealers will check the u-bolt nut torque and re-torque any loose u-bolts to specification.
These vehicles were assembled with the throttle cable contacting the dash mat which could bind the throttle. This does not meet with the maximum return times required by federal motor vehicle safety standard no. 124, "accelerator control systems."
Consequence of non-compliance: the engine speed may not return to idle increasing the potential for a vehicle accident.
Dealers will inspect for adequate throttle cable to dash mat clearance, and if there IS insufficient clearance, cut out a portion of the dash mat to provide proper clearance.
The seat recliner to seat frame attaching bolts on these vehicles could loosen, fatigue and fracture, allowing the seat back to suddenly recline.
If this were to occur to the driver's seat, this could result in a sudden loss of vehicle control increasing the risk of a vehicle accident.
Dealers will remove all foam and/or fabric sandwiched between the recliner assembly and the seat frame, install washers between the seat recliner and the seat frame at each attachment point, and install new attaching bolts torqued to a higher specification. These corrections will be made to both the driver's and passenger's seats.
Certain trucks have fuel rail assemblies with an improperly crimped end retainer clip that results in a fuel leak.
If fuel leakage occurs and an ignition source IS present, an engine compartment fire could occur.
Dealers will inspect the fuel rail assembly and replace any fuel rail assembly with a julian date code of 95318 through 95338.
Caution light; applied pressure to pedal, hit small bump ABS deactivated, resulting in rear collision. second instance applied heavy pressure to derivative (pedal application) loud squeal developed: finale: brake lock up.
Recall # 97v-037000, vehicle brought to dealer on three different times. Dealer does not have parts. Parts will not be available until may. *ak
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.