2003 Honda CBR600RR
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Honda › CBR600RR › 2003
These records cover every 2003 Honda CBR600RR. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2003 Honda CBR600RR. Newest first.
Ohlins Racing AB (Ohlins) is recalling certain steering dampers kits manufactured with an incorrectly machined bracket. These dampers were sold for use as aftermarket equipment on Yamaha R1, R6, and FZ6, Suzuki TL1000 R and GSX1300R, Honda CB600RR, and Ducati Monster 1000, 748, 848, 916, 996, and 998 motorcycles. Also included are universal steering…
Risk and remedy
Risk
If there is a crack in the steering bracket, at low speeds it may cause the steering to lock, leading to personal injury or a crash.
Remedy
Ohlins will notify the distributors and provide their customers with a new bracket. The recall began in November 2013. Owners may contact Ohlins USA at 1-828-692-4525. Note: This recall is an expansion of recall 13E-034.
On certain motorcycles, the rear brake linkage IS susceptible to corrosion which can cause binding and rough brake operation. as corrosion increases, it can cause a sticking pedal or require high brake pedal effort.
Risk and remedy
Risk
Linkage could break resulting in a loss of rear brake function which could increase the risk of a crash.
Remedy
Dealers will replace the spherical rod end and associated parts. this recall began on august 4, 2004. owners should contact honda at 1-800-999-1009.
Owner complaints
3 complaints2 involved a crash1 injuries
What owners report most
Latest complaints
- Power train
Does not shift into 2ND gear... It stalls out and rpm revels up. Driving along the road and all of sudden the eng. Revevs up and you are not in gear while driving....
- Service brakes, hydraulic › Pedals and linkages
Dt: the contact owns a 2003 honda cbr600rr motorcycle, he received a recall on the rear brake linkage. prior to the recall, the contact had an accident. he was slowing down to make a left hand curve, and the rear brakes locked, causing a collision. . the service dealer had the motorcycle for…
Dt: the contact owns a 2003 honda cbr600rr motorcycle, he received a recall on the rear brake linkage. prior to the recall, the contact had an accident. he was slowing down to make a left hand curve, and the rear brakes locked, causing a collision. . the service dealer had the motorcycle for about 2 months. the consumer went to the service dealer three times, and they stated they could not find anything to replace on the rear brakes. the consumer has not contacted the manufacturer of the motorcycle.*ak
- Service brakes, hydraulic
While applying the brakes they locked up. Consumer lost control of the motorcycle and crashed. consumer had the motorcycle towed to the dealer. *ak
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10128872Honda technician newsletter - Rider Seat InstallationWhen installing the rider seat on NM4, be sure to insert the front two prongs (one on each side) into their respective stays. If these prongs are not inserted fully, the seat may be difficult to install and remove. Top shelter installation - Several Honda models have a plastic top shelter that installs over a gas cap assembly that includes a rubber insulator around its circumference.
- 10128559Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
- 10128531Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
- 10032953Honda: warranty extension-vehicle warranty mileage. Class action lawsuit alleging that the odometers on certain 2002-2006 honda models were overstating mileage. Federal court provided final approval of settlement on 12/29/07. No models listed.
- 10025523Load carrying capacity reduced label for all honda vehicles.
- 10013898Service manual correction.
- 10010451Rear brake linkage safety recall notice. Under certain circumstances, the pushrod and/or the tie rod bushing in the rear brake master cylinder can become corroded thereby affecting the rear brake function.
- 10009000Service manual correction has incorrect specification listed for the fuel level sensor resistance. Honda 2003-2004 cbr600rr. The wrench. Honda technician newsletter. April 2004.
Every Honda CBR600RR model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.