2011 Hyundai Equus
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hyundai › Equus › 2011
These records cover every 2011 Hyundai Equus. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2011 Hyundai Equus. Newest first.
Hyundai Motor America (Hyundai) is recalling certain model year 2012 Genesis vehicles manufactured August 1, 2011, to April 30, 2012, and 2011-2013 Equus vehicles manufactured July 10, 2011, to June 12, 2012. The windshield wiper motor cover seal on the affected vehicles may degrade allowing corrosion on the wiper motor's circuit board. The corrosion can…
Risk and remedy
Risk
Inoperative wipers during inclement weather can decrease driver visibility, increasing the risk of a crash.
Remedy
Hyundai will notify owners, and dealers will replace the wiper motor cover and seal, free of charge. The recall began on April 22, 2016. Owners may contact Hyundai customer service at 1-800-633-5151. Hyundai's number for this recall is 140.
Hyundai Motor America (Hyundai) is recalling certain 2009-2011 Hyundai Genesis vehicles manufactured April 30, 2008, to November 21, 2010, and 2011 Hyundai Equus vehicles manufactured July 31, 2010, to November 21, 2010. Due to a circuit failure, the stop lamps in the affected vehicles may not illuminate.
Risk and remedy
Risk
A following vehicle may not recognize that the vehicle is slowing or coming to a stop if the stop lamps on the vehicle do not illuminate as expected. There is an increased risk of a rear-end crash as a result.
Remedy
Hyundai will notify owners, and dealers will repair the stop lamp switch circuit, free of charge. Hyundai issued an interim notification to owners on January 6, 2015. The recall began on March 23, 2015. Owners may contact Hyundai customer service at 1-855-671-3059. Hyundai's number for this recall is 125.
Owner complaints
24 complaints2 involved a crash1 involved a fire2 injuries
What owners report most
Latest complaints
- Suspension
Airbag suspension bags keep unable
- Suspension
The contact owns a 2011 Hyundai Equus. The contact stated that the front shocks were previously replaced under an unknown recall. The contact stated that while driving at various speeds, the vehicle experienced rear suspension failure. The vehicle was taken to the dealer, where the rear springs…
The contact owns a 2011 Hyundai Equus. The contact stated that the front shocks were previously replaced under an unknown recall. The contact stated that while driving at various speeds, the vehicle experienced rear suspension failure. The vehicle was taken to the dealer, where the rear springs were replaced; however, the failure recurred. The vehicle was taken to another dealer, where the rear springs were replaced a second time; however, the failure persisted. The contact stated that while driving on an uneven road surface, the vehicle was bouncing, and felt like the wheels were rubbing the front and rear wheel wells. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 30,000.
- Engine
The contact owns a 2011 Hyundai Equus. The contact stated there was an abnormal knocking sound coming from the engine. There was no warning light illuminated. The vehicle was taken to a local independent mechanic, where the vehicle was diagnosed, and the contact was advised that the rod bearings…
The contact owns a 2011 Hyundai Equus. The contact stated there was an abnormal knocking sound coming from the engine. There was no warning light illuminated. The vehicle was taken to a local independent mechanic, where the vehicle was diagnosed, and the contact was advised that the rod bearings had failed, and the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 120,000.
- Engine and engine cooling › Engine › Engine control module (ecu/ecm)
The contact owns a 2011 Hyundai Equus. The contact stated that while his wife was driving at an undisclosed speed, the vehicle stalled however, the driver was able to pull to the side of the road where the vehicle lost motive and was unable to be restarted. The contact stated that he was unaware of…
The contact owns a 2011 Hyundai Equus. The contact stated that while his wife was driving at an undisclosed speed, the vehicle stalled however, the driver was able to pull to the side of the road where the vehicle lost motive and was unable to be restarted. The contact stated that he was unaware of any warning lights being illuminated. The vehicle was towed to an independent mechanic who advised that they would attempt to restart the electronic computer module (ECM). The repair was successful however, the contact stated that the independent mechanic advised him that the failure could recur and that the vehicle should be taken to the dealer. The contact stated that the failure recurred without warning. The vehicle was then towed to the dealer. The failure was diagnosed that the ECM had malfunctioned and needed to be replaced. The ECM was replaced by a module from another vehicle. The contact stated that the vehicle had been at the dealer since July of 2021 as the replacement part was on back order. The contact stated that the dealer informed him that other issues were found with the vehicle and the contact was awaiting a call from the dealer. The manufacturer was notified of the failure and a case was opened. The approximate failure mileage was 50,000.
- Suspension
The contact owns a 2011 Hyundai Equus. The contact stated that on multiple occasions, the front end of the vehicle would lower to the ground without warning. Each time the failure occurred, the contact had the vehicle towed to the dealer where it was repaired; however, the failure would return soon…
The contact owns a 2011 Hyundai Equus. The contact stated that on multiple occasions, the front end of the vehicle would lower to the ground without warning. Each time the failure occurred, the contact had the vehicle towed to the dealer where it was repaired; however, the failure would return soon after repair. The manufacturer had yet to be notified of the failure. The vehicle had yet to be repaired. The failure mileage was unknown.
- Air bags
Clock spring malfunction.
- Service brakes
The brake pedal goes almost to the floor when the brakes are applied. I do not have much braking and I have changed the brake pads (front/rear) and bled the brakes and it did not help. I have read that the problem IS with the hydraulic electronic control unit (hecu) and the part IS covered under…
The brake pedal goes almost to the floor when the brakes are applied. I do not have much braking and I have changed the brake pads (front/rear) and bled the brakes and it did not help. I have read that the problem IS with the hydraulic electronic control unit (hecu) and the part IS covered under recall for the 2011 hyundai genesis (recall 13v489000). Since it IS the same part that IS used on the 2011 genesis, does the recall cover the equus which IS the same car.
- Electrical system · Suspension · Unknown or other
Malfunction of suspension and no dealership can reset. we been to meridian and hattiesburg dealership and either the equipment was not working or have the proper tools to correct the issue. always tried to sell us another vehicle. you
- Suspension
Similar complaint as nhtsa ID number: 11058378. the front end dropped to the ground and the esc indicator illuminated. noted that the front air-struts were to be replaced. replaced them in october 2018. however in march 2019, the total car has dropped lower than earlier. this while sitting. tried to restart car to see if all systems would reset, but to no avail. too dangerous to drive around.
- Service brakes
Car brakes failed to slow car in emergency traffic on highway, brakes were working fine then the pedal went to the flood and almost hit the car ahead. rear brakes were new, replaced front pads, but brake pedal still goes to the floor. there was a recall for genesis hcu , which has the same part…
Car brakes failed to slow car in emergency traffic on highway, brakes were working fine then the pedal went to the flood and almost hit the car ahead. rear brakes were new, replaced front pads, but brake pedal still goes to the floor. there was a recall for genesis hcu , which has the same part as this car, the cost of repair IS $3000. The car has 39000 miles , I believe the car has a defective hcu, similar to the sister car the genisis which was recalled. it IS dangerous to drive, the repair cost IS enormous and forces people to keep driving with defective brakes. driving without needing to stop suddenly the car works fine. only when traffic stops suddenly do you notice the need to put the foot to the floor , and it takes 100 extra feet to stop. this IS after replacing all pads and having the system checked. At the brake shop. I drive less than 500 miles a month and have had 2 near accidents.
- Suspension
TL* the contact owns a 2011 hyundai equus. While driving unknown speeds, the front end frame dropped to the ground and the stability indicator illuminated. The vehicle was towed to homer skelton hyundai (8145 craft rd, olive branch, ms 38654) where it was diagnosed that the suspension needed to be…
TL* the contact owns a 2011 hyundai equus. While driving unknown speeds, the front end frame dropped to the ground and the stability indicator illuminated. The vehicle was towed to homer skelton hyundai (8145 craft rd, olive branch, ms 38654) where it was diagnosed that the suspension needed to be replaced. The vehicle was repaired, but the failure recurred. The vehicle was taken to barnes crossing hyundai (3988 north gloster st, tupelo, ms 38804) where it was diagnosed that the air suspension needed to be replaced. The vehicle was repaired, but the failure recurred. The manufacturer was notified and did not assist. The failure mileage was 165,000.
- Steering · Suspension
I have 2011 hyundai equss that started having vsm issue that would keep smart cruise from working>it was resolved to be a brake switch!>during the trips to (2) different hyundai equss dealerships first in lexington@ glenn's hyundai & finally after issue was not resolved friendship hyundai, it was…
I have 2011 hyundai equss that started having vsm issue that would keep smart cruise from working>it was resolved to be a brake switch!>during the trips to (2) different hyundai equss dealerships first in lexington@ glenn's hyundai & finally after issue was not resolved friendship hyundai, it was determined to have caster and camber issue on right front wheel>i has the friendship dealership do a (4) wheel alignment and all toe in came good and steer ahead.the remaining issue was right front still was quite a bit out in upper red on both caster and camber.i was told to take to frame shop and I did,they could find no wrong measurements and they are regional multi line car repair facility that does all major insurance company body & frame issues,the engine and both front struts were replaced during it's 100600 mile life but after contacting the hyundai equus customer care they referred m back to dealer and he told me help desk gives no answers???how do I resolve and why have they not made a kit like genesis to address the issue??>very disappointed and upset!
- Suspension · Wheels
After several failed attempts to find a service center or authorized dealer to adjust my alignment, I felt it was necessary to file a complaint regarding my concerns about my vehicle's front tire alignment. my most recent experience occurred on december 14, 2016 after getting a new set of tires…
After several failed attempts to find a service center or authorized dealer to adjust my alignment, I felt it was necessary to file a complaint regarding my concerns about my vehicle's front tire alignment. my most recent experience occurred on december 14, 2016 after getting a new set of tires for my car. included in the tire fitting service was a wheel alignment check and adjustment. however, this IS not the first time I have encountered issues with a service center saying they are unable to adjust my front camber and castor adjustments because the "manufacturer does not specify" what these alignments should be. Perhaps the strangest part about this IS the fact that there are specifications for the rear wheels. I have even contacted several hyundai authorized dealerships here in indianapolis and they too indicate they are unable to make the proper adjustments. my last resort was to contact hyundai USA technical service to see if they could offer advice and they're only feedback was that I needed to visit a local authorized dealer for support ..... fortunately, I have not been in a life-threatening safety situation due to this defect but without the ability to properly adjust the alignment my tires will never wear proportionately. This IS incredibly concerning because the tread life on any tires I have installed on my car continues I lessen. I felt inclined to report this issue to the department of transportation because I can only imagine this IS an issue that's impacting all hyundai equus owners. it IS also concerning that no one seems to have the right answer on how to correct the problem. attached you will find paperwork from my most recent attempt to get the wheels aligned . I am hopeful you can help bring light to this issue and help correct and future problems for all equus owners.
- Service brakes
The brake pedal travel IS very long. I must begin the stopping process much earlier than previous. the dealer diagnosed a failed hecu. the vehicle IS only a few miles and one month out of warranty. hyundai motor america had an inspection campaign for genesis hecu units, but not equus. how can the hecu be properly inspected without disassembling the unit? hyundai should replace the failed hecu.
- Exterior lighting · Service brakes
When applying car brake pedal, the brakes lights will not illuminate. If I turn on car head lights the brake lights illuminate. But if the head lights are off they don't work.
- Exterior lighting › Brake lights
TL* the contact owns a 2011 hyundai equus. The brake lights failed to illuminate when the brake pedal was depressed. The brake lights were operable when the headlights were illuminated. The vehicle was diagnosed, but not repaired. The vin was not included in nhtsa campaign number: 14v713000 (exterior lighting). The manufacturer was not notified of the failure. The failure mileage was 92,400.
- Service brakes
I was driving the hard and I had to come to a stop on the highway. All of a sudden my brakes turned spongy and I swerved to miss a car. I have had the master cylinder replaced thinking that was the issue but it was still spongy. I then noticed the recall on the genesis and I contacted hyundai. I…
I was driving the hard and I had to come to a stop on the highway. All of a sudden my brakes turned spongy and I swerved to miss a car. I have had the master cylinder replaced thinking that was the issue but it was still spongy. I then noticed the recall on the genesis and I contacted hyundai. I asked did the recall affect the equss seeing how they are the same part numbers. They told me no and it didn't fall under the warranty either. They said I would have to pay around $2800 to have it fixed. I don't understand how the same part goes bad on 2 different cars but the recall isn't for the equus in the same years as the recall on the genesis.
- Service brakes
Driver behind me alerted that my brakes worked but my brake lights did not work. he indicated the potential for serious accident on the nation's highways. dealer replaced brake harness diode Z06. again on 20may2014, the same thing happened. this time, dealer replaced diode Z01. there was no…
Driver behind me alerted that my brakes worked but my brake lights did not work. he indicated the potential for serious accident on the nation's highways. dealer replaced brake harness diode Z06. again on 20may2014, the same thing happened. this time, dealer replaced diode Z01. there was no audible or visual warning on the dash although vehicle performs a "system check" at startup and warns of minor alerts like low tire pressure. I am afraid to drive the vehicle as I am a retired person and I must depend on the safety features of my car. two letters to hyundai hq have not produced results. internet searches reveal that this problem has existed with hyundai for many years. a permanent fix in the form of a recall IS required. or, refund the purchase price so that owners can buy a safe car. ... Updated 10/27/14 *bf updated 11/13/14 *bf updated 7/28/2015 *js *tr
- Electronic stability control (esc) · Suspension · Wheels
While we were driving the car, the car's front suspension suddenly failed, the front collapsed and the body of the car nearly touched the ground on flat grounds and dragged against the ground on inclines and declines. The wheels rubbed against the body of the car on turns and the car became very…
While we were driving the car, the car's front suspension suddenly failed, the front collapsed and the body of the car nearly touched the ground on flat grounds and dragged against the ground on inclines and declines. The wheels rubbed against the body of the car on turns and the car became very unstable and started to shake. This episode has occurred thrice despite manufacturer's repairs. This second episode resulted in mild whiplash. *tr
- Suspension · Wheels
While we were driving the car, the car's front suspension suddenly failed, the front collapsed and the body of the car nearly touched the ground on flat grounds and dragged against the ground on inclines and declines. The wheels rubbed against the body of the car on turns and the car became very unstable and started to shake. This episode has occurred thrice despite manufacturer's repairs. *tr
- Electrical system
TL* the contact owns a 2011 hyundia equus. The contact stated that the vehicle was parked in a residential garage with the engine turned off. When the contact entered the vehicle, he noticed brownish soot within the interior of the vehicle. The driver's side door area and seat were burnt. In…
TL* the contact owns a 2011 hyundia equus. The contact stated that the vehicle was parked in a residential garage with the engine turned off. When the contact entered the vehicle, he noticed brownish soot within the interior of the vehicle. The driver's side door area and seat were burnt. In addition, a small portion of the console melted. There were no flames visible. The fire department was called to the scene who stated the fire was electrical. The vehicle was towed to an authorized dealer where an independent inspector performed further investigation. The vehicle was destroyed. The manufacturer was notified of the problem. The failure mileage and vin were unavailable.
- Electrical system
TL* the contact owns a 2011 hyundai equus. The contact stated that the instrument panel and all of the electrical components failed. The vehicle was taken to the dealer for inspection but they could not diagnose the cause of failure. The vehicle was not repaired. The manufacturer was notified but provided no assistance. The failure mileage was 11,000.
- Suspension
This was the date of the first incident, another incident happened three months later. We were just driving along and the air suspension system failed and the whole car, mostly the front dropped a number of inches, we could barely drive home and had to have vehicle towed, seems to be a very unsafe…
This was the date of the first incident, another incident happened three months later. We were just driving along and the air suspension system failed and the whole car, mostly the front dropped a number of inches, we could barely drive home and had to have vehicle towed, seems to be a very unsafe item. The first time it was the passenger side, second time it was the driver side.i contacted hyundai, and wanted them to buy back the vehicle, as I have had numerous other small issues go wrong, but this suspension problem feels very unsafe and actually makes me concerned when I drive,they refused to buy it back. *tr
- Electrical system · Visibility/wiper
Since I bought my car, it randomly opens the trunk by itself without pushing any button on the dashboard or on the remote control. one time, I almost drove back into a car passing by, because my rear view was blocked by opened trunk. I am afraid that my trunk may open while I am driving by itself…
Since I bought my car, it randomly opens the trunk by itself without pushing any button on the dashboard or on the remote control. one time, I almost drove back into a car passing by, because my rear view was blocked by opened trunk. I am afraid that my trunk may open while I am driving by itself or run into another car because my view was blocked by this trunk. I have four videos of my trunk being opened by itself, but hyundai's distric parts and service manager IS refusing to fix my problem. Http://www.youtube.com/watch?v=wqudghgozug http://www.youtube.com/watch?v=kzcbox7oinu http://www.youtube.com/watch?v=-ze2aspwh_0 http://www.youtube.com/watch?v=ew3df_vs954. *tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10253275This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.
- 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
- 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10235526In certain areas, a vehicles underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. The service campaign describes the procedure to perform this preventative service on certain 2009-2014MY Genesis Sedan (BH), 2011-2016MY Equus (VI), and 2010-2016MY Genesis Coupe (BK) vehicles.
- 10235525In some areas, a vehicles underbody may exhibit corrosion due to road salt usage. As a preventative measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to the bottom exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain Genesis Sedan (BH), Equus (VI), and Genesis Coupe (BK) vehicles.
- 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
- 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
- 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 10213727The warranty coverage for the hydraulic electronic control unit (HECU) for certain 2009-12 Genesis (BH) and 2011-12 Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.
- 10213723The warranty coverage for the hydraulic electronic control unit (HECU) for certain Genesis (BH) and Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners.
- 10210203The warranty coverage for the hydraulic electronic control unit (HECU) for certain Genesis (BH) and Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners.
- 10208866The brake fluid specifications labeled on the master cylinder reservoir cap and in the vehicle owners manual require revision to indicate DOT 4 brake fluid only. This bulletin describes the procedure to replace the master cylinder reservoir cap and apply a sticker to the owners manual with the revised brake fluid specification.
- 10204249This bulletin describes the procedure to replace the 35R and 4&OD solenoids for a shift flare and/or harsh shift during the 2~3, 3~4 or 4~5 upshift.
- 10196577The warranty coverage for the clock spring has been extended to 15 years with unlimited mileage from the date of original retail delivery or date of first use, whichever occurs first. This warranty coverage applies to both the original and subsequent owners. Refer to the warranty and service parts information outlined in this bulletin whenever clock spring replacement is required.
- 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
- 10190038This bulletin provides best practice recommendations when performing brake service procedures.
- 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 10183963This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 10183960This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
- 10178175This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
- 10176182This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 10176178This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
- 10174808This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
- 10174807The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
- 10173546This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
- 10172142This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
- 10170883This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
- 10169370The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
- 10167253This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
- 10160098This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
- 10158803This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual parts.
- 10128606The front seat belt assembly incorporates a seat belt anchor pretensioner fastened to the vehicle?s front seat frame. During vehicle assembly, the anchor pretensioner is fastened to the front seat frame prior to being connected to the seat belt linkage. If, during vehicle repair, the connector does not fully latch when the linkage was pressed onto the connector, the seat belt can detach from the anchor pretensioner. If the seat belt linkage detaches from the anchor pretensioner in a collision, the risk of injury to the occupant is increased.
- 10128604Hyundai Motor America is changing the Genesis sedan applicable model years to 2011-14 for service campaign T2R. Service Campaign T2R provides a service procedure to install warning labels on the front seat belt assemblies on 2011-2016 Equus vehicles and 2011-14 model year Genesis sedans.
- 10127006The front seat belt assembly incorporates a seat belt anchor pretensioner fastened to the vehicle's front seat frame. During vehicle assembly, the anchor pretensioner is fastened to the front seat frame prior to being connected to the seat belt linkage. If, during vehicle repair, the connector does not fully latch when the linkage was pressed onto the connector, the seat belt can detach from the anchor pretensioner. If the seat belt linkage detaches from the anchor pretensioner in a collision, the risk of injury to the occupant is increased. This bulletin describes the procedure to install warning labels on the driver's and/or passenger's seat belt assemblies to prevent potential improper reattachment of the anchor pretensioners.
- 10126997Hyundai Motor America is conducting a Service Campaign to install warning labels on the driver's and/or passenger's seat belt assemblies on 2009-14 Model Year Genesis sedan and 2011-16 Equus vehicles. Service Campaign T2R provides a service procedure to install warning labels on the front seat belt assemblies.
- 10115699This bulletin provides information regarding changes to the 11-12MY VI Equus rear spring service parts. The service part numbers for the rear left and rear right air spring assemblies have been superseded according to the Parts Information table below. There are some physical differences (top hat angle, air bladder dimensions). These changes have no impact on parts compatibility. Please use the new part numbers when replacing these parts.
- 10082455"The pcm or tcm contains logic to adjust solenoid duty and line pressure as needed to compensate for normal clutch wear over the life of the transaxle. This bulletin provides the procedures necessary to reset (erase) and relearn the pcm/tcm adaptive values. After the following repairs have been completed, the pcm/tcm adaptive values must be reset in order to provide optimum shift quality. If the procedure IS not performed, the transmission may experience a shift flare or harsh shift. H replace automatic transaxle or pcm/tcm h reprogram or exchange a pcm/tcm from another vehicle"
- 10082434This bulletin provides the warranty extension and related service parts information for the windshield wiper motor in some genesis sedan (bh) and equus (vi) vehicles. The subject vehicles are equipped with a windshield wiper motor which may have been manufactured with a cover seal that was subsequently revised by the supplier.
- 10082380"Hyundai motor america IS announcing a warranty extension for the windshield wiper motor on the subject vehicles to 10 years from the date of original delivery or the date of first use, or 100,000 miles, whichever occurs first. The windshield wiper motor may either function intermittently or stop functioning."
Every Hyundai Equus model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.