2019 Hyundai Ioniq Plug-In Hybrid

Owner complaints

What owners report most

1. Electrical system5
2. Power train4
3. Vehicle speed control2
4. Fuel/propulsion system2
5. Seat belts2
6. Unknown or other2
7. Structure1
8. Engine1
9. Air bags1

Latest complaints

• Oct 20, 2026MD
  Electrical system
  Component that failed: The charging inlet locking actuator (Hyundai: "charging connector lock/unlock actuator") on my 2019 Hyundai IONIQ Plug-In Hybrid. It locks the connector to the inlet. The failed actuator is STILL INSTALLED and available for inspection at a dealership. Safety risk: Hyundai…

  Component that failed: The charging inlet locking actuator (Hyundai: "charging connector lock/unlock actuator") on my 2019 Hyundai IONIQ Plug-In Hybrid. It locks the connector to the inlet. The failed actuator is STILL INSTALLED and available for inspection at a dealership. Safety risk: Hyundai TSB #18-BE-018 requires technicians to disconnect the high-voltage safety plug, wait 5 minutes for capacitor discharge, and wear insulated gloves because the area contains "high voltage components." A locked actuator forces owners to pry at an energized connector—shock hazard. A partially engaged connection risks arcing and fire. Charging failure also depletes the traction battery, cutting power available for merging and evasive maneuvers. Incident: Without warning, the connector would not release. It took ~30 minutes to free the charger. I nearly had to drive with the charger connected, feeding the cord through my driver's window. No warning lamps appeared before or during the failure. Confirmed by dealer: Yes. Diagnosed by [XXX] Hyundai on XXX, invoice XXX. Inspections: Dealer only. No police report, insurance claim, or known HMA engineering inspection. Manufacturer knowledge: Hyundai issued TSB #18-BE-018 in Nov 2018, while 2019 models were being sold, acknowledging IONIQ PHEVs "may experience a charging connector lock/unlock actuator malfunction," with warranty coding (Op Code 91999R00; Nature Cause I14 ZZ3). Hyundai said my VIN fell outside the recall population under undisclosed criteria, and covers the part only 5yr/60k, not the 10yr/100k Hybrid System Warranty. Requested action: (1) Evaluate whether this is a safety defect under 49 U.S.C. Ch. 301. (2) Obtain Hyundai's claim volume for Op Code 91999R00/I14 ZZ3 by model year, plant, build range, plus injury/fire reports. (3) Confirm whether a recall covers this component and publish its scope. (4) Assess whether Hyundai's exclusion of my VIN was adequately supported. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Apr 22, 2026OR
  Electrical system · Unknown or other
  Supplemental to my complaint filed April 18, 2026 regarding Dick's Hillsboro Hyundai (dealer code OR035). The dealership's Service Manager (Robin Farr) provided me with an HMA training report from Hyundai's internal system. Every staff member is listed at "Certified": the baseline tier. No one is…

  Supplemental to my complaint filed April 18, 2026 regarding Dick's Hillsboro Hyundai (dealer code OR035). The dealership's Service Manager (Robin Farr) provided me with an HMA training report from Hyundai's internal system. Every staff member is listed at "Certified": the baseline tier. No one is above this level. No EV/HEV-specific certification is indicated for any individual. Despite this, the dealership confirmed by phone they could service a 2019 Ioniq PHEV, then performed ICCU/DC-DC converter diagnostics (a hybrid electrical system procedure) and a 12V battery installation in the boot area adjacent to high-voltage components. The vehicle was returned with the hold-down bracket unsecured and retaining bolts missing which was only discovered when my car was assessed by a second Hyundai dealership after I had driven a significant distance. Hyundai's own shop manuals state: "Never allow technician to work on high voltage systems who are not wearing personal protective equipment." Hyundai TSBs for hybrid repairs require insulating gloves rated at 1000V AC/1500V DC. HMA's CPO form (HMACPO0601) requires an "EV/HEV Inspection certified technician" for hybrid-specific work. The ASE xEV Safety Standards state employers "SHALL verify" technician ability to work on HV systems. The dealership's website also claims its service department includes "Master technicians." The HMA training report shows no staff at that level. The Ioniq PHEV boot area contains HV wiring (DC 240V-360V). A loose metal bracket contacting terminals or HV wiring could cause a short circuit, arc, or fire — the type of hazard EV/HEV training exists to prevent.

• Apr 18, 2026OR
  Electrical system
  Following a 12V auxiliary battery replacement at Dick's Hillsboro Hyundai [XXX] , April 3, 2026), the battery hold-down bracket was left completely unsecured. The retaining bolts were absent, (later found loose in the cargo tray area). The battery terminal cover was also improperly secured. I…

  Following a 12V auxiliary battery replacement at Dick's Hillsboro Hyundai [XXX] , April 3, 2026), the battery hold-down bracket was left completely unsecured. The retaining bolts were absent, (later found loose in the cargo tray area). The battery terminal cover was also improperly secured. I returned to the dealership within twenty minutes of collecting my vehicle and described the condition directly to Service Manager Robin Farr, who assured me it would be corrected. It was not. On April 6, 2026, Withnell Hyundai in Salem, OR (RO# XXX/X) identified the bracket as completely unsecured with me present, documenting: "found the 12V bracket loose on arrival" and "found that battery hold down was not secured with customer present...bolts were located in cargo tray area." I had driven approximately 50 miles with this condition unknown to me. On a 2019 Hyundai Ioniq PHEV, the 12V battery is located in the boot adjacent to high-voltage traction battery components and wiring. A loose metal bracket free to move during driving presents a genuine risk of electrical arc and fire in an enclosed space: potentially while the vehicle is in motion. Dick's acknowledged the failure in writing and refunded the charges associated with this work. The condition has been corrected by Withnell Hyundai. I am filing this report to create a federal record of a safety-critical installation failure at a certified Hyundai dealership. I contacted Hyundai Motor America (Case #XXX) regarding this matter. Their representative was unable to describe any oversight mechanism ensuring safe repairs at certified Hyundai dealerships. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Jul 30, 2025CA
  Electrical system · Fuel/propulsion system · Power train
  While driving the transmission started driving rough and the car was stuck in ev mode. Wouldnt even go back to hybrid mode. I kept driving until all my battery range was exhausted and lost acceleration and had to pull over the side of the highway. It was late at night so there was no one around or…

  While driving the transmission started driving rough and the car was stuck in ev mode. Wouldnt even go back to hybrid mode. I kept driving until all my battery range was exhausted and lost acceleration and had to pull over the side of the highway. It was late at night so there was no one around or behind me, otherwise I would have been hit. Once stopped the car would not move at all so I called a tow to get me off the highway. I was away from home and had to tow it 120 miles back to the local dealer. The engine clutch actuator failed and ruined my transmission and left me stranded in the middle of the night!

• Mar 18, 2024CA
  Fuel/propulsion system · Power train · Vehicle speed control
  Many times, when I back out of my driveway into the intersection in front of my house the vehicle hesitates for several seconds when shifted from Reverse to Drive. I am in a situation where I cannot accelerate if needed out of the intersection. This is a safety issue in my opinion. The dealer was…

  Many times, when I back out of my driveway into the intersection in front of my house the vehicle hesitates for several seconds when shifted from Reverse to Drive. I am in a situation where I cannot accelerate if needed out of the intersection. This is a safety issue in my opinion. The dealer was not able to replicate the problem, even though it happens frequently and has not provided a solution. One time, on a long road trip, while climbing a grade the vehicle could not achieve normal highway speeds (could only get to 20-30 mph). Big rigs were right behind the vehicle and were not happy having to slow down. Again creating a big safety hazard.

• Dec 2, 2023NY
  Seat belts

  The rear driver's side seat belt completely detached from the shoulder attachment point.

• Feb 19, 2023NY
  Seat belts

  Seat belts are stuck and most times does not get intact or reset after you get out of car seat. It has been happening over a month.

• Jul 15, 2022MDCrash1 injury
  Electrical system · Engine · Power train
  In the middle lane of a multiple lane highway, it suddenly gave a very confusing warning on the dashboard. It lost power and slowed down quickly to below 40 mph. It didn't help to press down the gas pedal. I was forced to switch from the middle lane to the passing lane in order to reach the…

  In the middle lane of a multiple lane highway, it suddenly gave a very confusing warning on the dashboard. It lost power and slowed down quickly to below 40 mph. It didn't help to press down the gas pedal. I was forced to switch from the middle lane to the passing lane in order to reach the shoulder. The car was side swept by another car in the passing lane because it was at low speed. Once it reached on the shoulder it stopped completely. If it gave a clear warning, for example, "pull out immediately!", and flashed the emergency light automatically, it might save a few seconds, and gave a warning to cars behind. It's a PHEV, and I believe that it used up the battery for driving but failed to automatically start the gas engine.

• Jun 14, 2022PA
  Power train
  While my wife and I were driving on the interstate, all dashboard warning lights came on at once, and the car began rumbling at regular intervals as it tried and failed to switch from electric vehicle (EV) mode to hybrid EV (HEV) mode, and the engine wouldn't start. At the same time, the power…

  While my wife and I were driving on the interstate, all dashboard warning lights came on at once, and the car began rumbling at regular intervals as it tried and failed to switch from electric vehicle (EV) mode to hybrid EV (HEV) mode, and the engine wouldn't start. At the same time, the power steering stopped working, the car struggled to go more than 40 MPH, and it started accelerating on its own and would not stop until I hit the brake. Each time the engine tried and failed to start, the car started accelerating again. I pulled off at a gas station, turned the car off, and called for a tow. I tried to turn it on again but got a "Check Hybrid System" message and could not start the car, so I had it towed to a dealer. They diagnosed it as a dead 12-volt battery; however, they had none in stock and would be unable to get one for 2 weeks, so they charged the 12v and told us we should be able to get home. It happened again a few hundred miles later, and the situation repeated itself. This 2nd dealer also diagnosed that the issue was the 12v but couldn't get one in for at least a week. We rented a car, drove home, and when the dealer replaced the battery, they shipped it up to us. A week later, the car's big battery (not the 12v) was failing to charge, so we brought it to another dealer. They claimed they had no trouble charging it and returned the car. Shortly after that, it died again, in the same fashion described above. We took it back to the dealer, and they had it for over a month, claiming they could not replicate the problem. They returned the car, having diagnosed no problem, so I drove around the dealer and replicated issue myself. It took 15 minutes for the check engine light to come on. I brought it back to the dealer. When they got in the car, the power steering was dead, and the car could barely move. They've now acknowledged that the problem exists and are trying to diagnose it for a 4th time (5th if you count when I was unable to get it to charge).

• Aug 27, 2021CACrash2 injuries
  Air bags

  On 08/13/2021 my wife was involved in an accident where the front air bag did not deploy causing her to hit the steering wheel and break her sternum casing extreme pain. We need to understand why the front air bag did not deploy?

• Oct 5, 2020CA21,000 miCrash
  Structure › Body · Unknown or other · Vehicle speed control
  Apparently, a front-end collision occurred while the vehicle was parked and unoccupied in a parking lot resulting in $1232 in damage to body parts, anti-collision radar, and electronic cruise control. astonishingly, the bumper and even the front license plate sustained almost no visible damage…

  Apparently, a front-end collision occurred while the vehicle was parked and unoccupied in a parking lot resulting in $1232 in damage to body parts, anti-collision radar, and electronic cruise control. astonishingly, the bumper and even the front license plate sustained almost no visible damage whatsoever. see photos attached. the collision must have happened at extremely low speed and it IS obvious the front bumper did nothing to protect the rest of the car--its primary intended function. this would be the equivalent of a house burning down to protect the fuse box. I checked your website and note that the hyundai ioniq IS as yet not rated. I suspect there IS a serious safety issue for a car to sustain such damage in a parking lot with almost no visible damage to its primary protection mechanism: the bumper. please note that items damaged were all immediately behind the bumper--a very dangerous place for them to be.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Pedestrian alert sounds

  DP22005Opened Jan 27, 2023Closed Aug 7, 2023Recall 22V063000
  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…

  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
• 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
• 10240087This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundais Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.
• 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
• 10235346When servicing any of the specified vehicles below with the corresponding DTCs, C2416, Motor Short or Open LH (EPB) or C2417 Motor Short or Open RH (EPB), follow the step-by-step procedures in this bulletin.
• 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
• 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
• 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
• 10215599Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10213725If you are servicing an applicable model with Hybrid Drive Motor (Traction Motor) improper operation or any DTC listed in the related shop manual, Motor Control System, refer to the shop manual for diagnosis. If the diagnosis indicates a faulty hybrid drive motor, refer to the Service Procedure and replace the hybrid drive motor.
• 10211680Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10211678Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10203272Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
• 10191793This bulletin describes the procedure to update the EPB (Electronic Parking Brake) ECU to revise the logic of setting DTC C2416, Motor Short or Open LH (EPB) or C2417 Motor Short or Open RH (EPB) from vibrations while driving on certain roads.
• 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
• 10190038This bulletin provides best practice recommendations when performing brake service procedures.
• 10190035This bulletin describes the procedure to install a protection cover over the In-Cable Control Box (ICCB) to protect against drops, bumps, or shock.
• 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
• 10185450This bulletin provides information related to the Engine Control Module (ECM) software logic update for DTC P0128 Coolant thermostat - Coolant temp Below thermostat regulating Temperature. There is no drivability issue with this DTC.
• 10185431This bulletin provides information related to the Engine Control Module (ECM) software update for OBD communication test logic, and for DTC P0128 Coolant thermostat - Coolant temp Below thermostat regulating Temperature. There are no drivability related conditions.
• 10183963This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
• 10183960This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
• 10182304This bulletin provides information and procedures for collecting OBD In Use Monitor Performance Ratio (IUMPR) data on certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board).
• 10180985Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
• 10180981This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10179246Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
• 10179244This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10178175This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
• 10176182This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
• 10176178This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
• 10174808This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
• 10174807The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
• 10173552This bulletin provides additional service diagnostic information and repair procedures related to electric A/C compressors equipped in hybrid electric vehicles, plug-in hybrid electric vehicles, and electric vehicles.
• 10173546This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
• 10173545This bulletin describes the mandatory procedure to submit battery test data electronically for battery warranty claims by running the GDS Battery Claim App. The App must be run right after an incident battery is removed from the vehicle or after a battery charge is completed which qualifies for a warranty. It must be run at any time between RO open and close dates.
• 10172147This bulletin describes the procedure to properly bleed the brakes on Sonata HEV/PHEV (LF) and Ioniq EV/HEV/PHEV (AE) vehicles. This procedure applies when any air is introduced into the Active Hydraulic Boost (AHB) system, which consists of the pressure supply unit (PSU), and the integrated brake actuation unit (IBAU). Improper bleeding of the brake system can result in the presence of air, which may reduce braking effectiveness.
• 10172142This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
• 10170896This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10170883This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
• 10170512This bulletin provides information and procedures for collecting OBD ?In Use Monitor Performance Ratio? (IUMPR) data on certain 2019-2020MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board). Data is no longer submitted to Hyundai by datasheet and dealer email. Data is sent electronically by GDS when the procedure of this bulletin is followed.

Every Hyundai Ioniq Plug-In Hybrid model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.