2019 Hyundai Sonata Plug-In Hybrid

Owner complaints

What owners report most

1. Fuel/propulsion system3
2. Electrical system2
3. Power train2
4. Engine1
5. Unknown or other1

Latest complaints

• Jul 26, 2026CA
  Electrical system · Fuel/propulsion system · Power train
  The high voltage battery will no longer charge neither from being plugged in to the charger on the wall nor from the buikt in system onboard the car. There are warning lights saying the inverter coolant is low but the reservoir is at the proper level. I suspect the coolant for the Hybrid charging…

  The high voltage battery will no longer charge neither from being plugged in to the charger on the wall nor from the buikt in system onboard the car. There are warning lights saying the inverter coolant is low but the reservoir is at the proper level. I suspect the coolant for the Hybrid charging inverter is bad and crystalizes causing blockages in the inverter coolant system. My car refuses to charge for the last 2 years. After a few seconds (about 7-10) the car shuts off the charging system when plugged in. And now that summer heat us here in the South West, it will not even charge from the regenerative braking. The high voltage battery previously would maintain 10-15% charge from the gas engine and regenerative braking. Now it's sitting at 1%. Because the battery is so low the electric motor does not produce power, and the gas engine is under powered on its own. This makes acceleration from a stop light/sign sluggish, slow and dangerous. Other Hyundai EV (IONIC and Kona) and PHEV (Santa Fe and Tucson) models have had their inverter coolant flushed and replace, some with a different spec coolant. This Sonata 2019 PHEV probably suffers from the same poor coolant and needs to be flushed and replaced by the better spec coolant fluid too. This has been getting worse and worse the last 2 or 3 years. The dealer refuses to acknowledge the problem and wants to diagnose the whole system before replacing what is obviously wrong first. The inverter coolant low level alert comes on some times, but it is not low. I haven't had time to let the dealer keep my car for days while they pretend to not know the problem and refuse to accept responsibility. Hyundai Technical Service Bulletin (TSB) exist for IONIC, Kona, Santa Fe, and Tucson models. For example the Hybrid Santa Fe and Tucson TSB is Hyundai TSB 23-01-052H-1.

• Sep 7, 2023MD
  Fuel/propulsion system
  While driving the car it suddenly decelerated and multiple warning errors on electronics, driver assist, braking started going off then the error message of Check Hybrid Turn Engine Off came on. I was able to coast into a parking lot as the car could only go around 5 miles an hour. I turned the…

  While driving the car it suddenly decelerated and multiple warning errors on electronics, driver assist, braking started going off then the error message of Check Hybrid Turn Engine Off came on. I was able to coast into a parking lot as the car could only go around 5 miles an hour. I turned the care off and on and the Check Hybrid Turn Engine Off remained for the 2 hours it took to have a tow truck come to take the car to a dealer. The car has 16,383 miles and prior to this there was no warning or error messages. The dealer hasn't reviewed the car yet, but the fact that it immediately, with no warning, decelerated and would go only 5 miles an hour is very risky and unsafe.

• Nov 7, 2022NY
  Electrical system · Engine · Power train
  I was traveling on a highway when a "hybrid system warning" suddenly appeared on the dashboard. Every dashboard warning light illuminated. The car began to lose power. I exited the highway immediately and the car began to have sporadic power and was "lurching." I immediately pulled onto the…

  I was traveling on a highway when a "hybrid system warning" suddenly appeared on the dashboard. Every dashboard warning light illuminated. The car began to lose power. I exited the highway immediately and the car began to have sporadic power and was "lurching." I immediately pulled onto the shoulder and at that time another warning on the dash appeared within a minute or two of the first warning that said "shut engine off." The computer screen began to flash on and of and the windows would not roll up smoothly. When the tow truck arrived the car wouldn't start and it didn't recognize the key fob. Hyundai now has the vehicle and claims the car needed a "software update", but they cannot tell me if it will ever happen again and cannot tell me why the car goes into critical failure when it needs a mere software update. This is the second time this has happened. The first time it was repaired under a voluntary recall campaign about a year ago. This is an extremely dangerous occurrence as the car loses power without warning. I was fortunate to be near an exit when it happened and able to safely get off the highway, but that was just luck. The manual indicates that a hybrid system warning means that the car can potentially go on fire.

• Oct 21, 2020OR24,922 mi
  Fuel/propulsion system

  The message "hybrid system failure" suddenly displayed and the vehicle lost power and stalled. This occured on hyw (65mph) and nearly caused wreck from behind

• Sep 5, 2020NY56 mi
  Unknown or other

  The touch screen radio IS ineffective when tuning to siriusxm. It just sits on updating and nothing else you press works. I have had multiple mechanics look at it, pulled fuses, resets and nothing fixes the issue. From research online it appears this has been an ongoing issue for years with hyundai touch screens. They say there's nothing they can do, but I literally just bought the car.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Pedestrian alert sounds

  DP22005Opened Jan 27, 2023Closed Aug 7, 2023Recall 22V063000
  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…

  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

• Loss of Motive Power

  DP22003Opened Sep 12, 2022Closed Dec 12, 2023
  The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles…

  The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles spanning Model Years (MY) 2005-2021. The Petitioners cited examples of complaints indicating that the subject vehicles were experiencing rapid loss of engine oil due to oil drain plug back outs, resulting in loss of motive power and/or catastrophic engine damage. Additional complaints were provided which alleged that the oil drain pans lack sufficient structural integrity and are susceptible to cracking. The petition itself can be reviewed at NHTSA.gov under ODI number 11481745. On September 12, 2022, the Office of Defects Investigation (ODI) opened Defect Petition (DP22-003) to evaluate the Petitioners’ request. The Petitioners have provided additional complaints within four supplemental letters dated January 31, 2023, March 21, 2023, May 23, 2023, and August 4, 2023. ODI’s evaluation included the review and analysis of the complaints and supporting information submitted by the Petitioners, as well as additional complaints submitted directly to NHTSA which referenced either the oil drain plug or a crack in the oil pan. After reviewing the available data, ODI has not identified evidence that would support opening a defect investigation into the oil drain pan assemblies of the subject vehicles. Based on a review of the available information, a loss of motive power resulting from an oil drain plug back out has not occurred between the initial sale of a vehicle and the completion of its first oil change. If during an oil change service, a technician fails to remove the existing drain plug gasket before installing a new gasket, it is likely that a proper seal between the drain plug and the oil pan will not be made. An improper seal between the drain plug and oil pan could lead to the backing out on the drain plug, resulting in the sudden loss of oil while driving. Additionally, the provided examples of oil pan cracks were localized to the immediate vicinity of the oil drain plug and/or appeared to be the result of direct-contact with a tool during servicing.  There is no information to support that a vehicle-based defect exists relating to the oil pan assembly, and instead the documented incidents are related to the failure to follow the proper maintenance procedures during oil change service. In October 2023, Hyundai published a Technical Service Bulletin (TSB) that provided detailed instructions for oil change service on its gasoline powered vehicles, specifically highlighting the need to remove and replace the existing drain plug gasket prior to reinstalling the drain plug. After a thorough review of the material submitted by the petitioner, the information already in NHTSA's possession, and the potential risks to motor vehicle safety implicated by the petitioners' allegations, NHTSA does not believe that a formal investigation is warranted. Therefore, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA’s reasons for denial of the petition will be published. The reference numbers for the complaints to NHTSA cited by the petitioner can be found in the petition submission documents in the public file for DP22-003. To review those complaints and the additional complaints ODI added to its evaluation which are cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
• 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
• 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
• 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
• 10227320Certain vehicles may experience the Check Engine warning lamp illuminated with DTC P1326 and/or engine may exhibit abnormal noise, or no crank/no start condition related to connecting rod bearing wear or damage. This Dealer Best Practice outlines the service process to inspect the vehicle and replace the engine or update the engine ECU software based on the inspection results, as well as related warranty coverage for the conditions outlined above.
• 10227317Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10227316The warranty coverage for engine repair or replacement regarding engine damage or malfunction from connecting rod bearing wear has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Commercial entities and individuals engaged in the buying, selling, leasing, or renting of motor vehicles, as well as salvaged vehicles, are ineligible for the extended warranty.
• 10227313Op code/part number (reference guide for service campaign T6G)
• 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
• 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
• 10215599Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10211680Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10211678Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10211675The Powertrain warranty coverage for certain engine repairs and/or replacement where the engine damage or malfunction is related to connecting rod bearing wear, has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
• 10211667Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
• 10211666Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10211664Hyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
• 10211662Certain vehicles that have completed Service Campaign 966 may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10210206Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10210205Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
• 10203272Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
• 10199106This bulletin describes the procedure to diagnose and repair the Engine Electric Water Pump (EEWP) on certain Sonata Hybrid (LF HEV) and Sonata Plug-In Hybrid (LF PHEV) vehicles with DTC P2600, causing an HEV and/or MIL warning lamp illumination.
• 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
• 10190038This bulletin provides best practice recommendations when performing brake service procedures.
• 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
• 10183963This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
• 10183960This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
• 10182304This bulletin provides information and procedures for collecting OBD In Use Monitor Performance Ratio (IUMPR) data on certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board).
• 10180985Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
• 10180981This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10179246Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
• 10179244This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10178175This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
• 10177088This bulletin provides information related to an Electronic Control Module (ECM) software update to revise the logic for DTC P050A: Cold Start Idle Air Control System Performance.
• 10176194If you are servicing an applicable vehicle with the following symptoms and DTC, follow the Service Procedure on Page 4. Check Engine light on DTC P0880/P088000 - TCM Power signal error open/short Transmission stuck in 4th gear fail-safe Harsh shift into Reverse and Drive
• 10176182This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
• 10176178This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
• 10174808This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
• 10174807The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
• 10174799If you are servicing an applicable vehicle with a Check Engine light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.

Every Hyundai Sonata Plug-In Hybrid model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.