2015 Infiniti QX70

Recalls

1 recall names the 2015 Infiniti QX70. Newest first.

• Fuel system, gasoline

  Nov 28, 2014NHTSA 14V683000133,592 vehicles

  Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles. The fuel pressure sensors may not have been sufficiently tightened during production. As a result, the fuel pressure sensor may loosen with vehicle usage and cause…

  Risk and remedy

  Risk

  A fuel leak in the presence of an ignition source could cause a vehicle fire.

  Remedy

  Nissan will notify owners, and dealers will re-torque the fuel pressure sensors free of charge. The recall began on January 25, 2015. Owners may contact Nissan customer service at 1-800-647-7261.

  Full recall details →

Owner complaints

What owners report most

1. Service brakes3
2. Electrical system1
3. Exterior lighting1
4. Power train1
5. Seat belts1
6. Structure1
7. Air bags1
8. Unknown or other1

Latest complaints

• Sep 15, 2026TX
  Power train
  I was driving down the highway and the revs went up really high with some banging and clanging, the check engine light came on and the gears stopped shifting. The dealer told me the transmission valve body failed and it seems to be a common issue in these cars. Not safe to drive as the gears wont…

  I was driving down the highway and the revs went up really high with some banging and clanging, the check engine light came on and the gears stopped shifting. The dealer told me the transmission valve body failed and it seems to be a common issue in these cars. Not safe to drive as the gears wont shift and this seems to be a sensor in the transmission that is doomed to fail after a matter of time. Infiniti reengineered this part because they know it is going to fail but have not issued a recall.

• Jan 29, 2025TXFire
  Electrical system · Service brakes
  Brake fluid began leaking onto the ABS actuator circuit board and created an electrical fire. This melted the engine harness and the connector to the abs module. This was confirmed by dealership technicians at Sewell Infiniti - Dallas. Dealership informed me they could not fix the vehicle because…

  Brake fluid began leaking onto the ABS actuator circuit board and created an electrical fire. This melted the engine harness and the connector to the abs module. This was confirmed by dealership technicians at Sewell Infiniti - Dallas. Dealership informed me they could not fix the vehicle because the part needed to replace (affected by a different recall), was discontinued and made me tow the vehicle to my house. The issue was confirmed by mechanics at Parkwood collision - Frisco. InfinitiUSA customer service acknowledged the issue and that they would have the original supplier of the engine harness (discontinued) make me one if I purchased at the dealership (which to my understanding would not solve the original issue at hand). It is available to inspect upon request. I have pictures and videos. The fire did put myself and others at risk as the engine harness was melting and shorting out while pulling my vehicle to the side of the road. It has not been inspected by insurance rep; at this time. There were zero issues with the vehicle or modifications to vehicle at the time of the incident. There were no warning lamps or symptoms until it was too late.

• May 17, 2021NV
  Service brakes
  I was backing out of the garage intending to stop on the driveway and inspect tires in the sunlight. The brakes had no effect and the car proceeded across the street and up the neighbor's driveway and finally stopped just short of their garage door. All this time I was applying the brake…

  I was backing out of the garage intending to stop on the driveway and inspect tires in the sunlight. The brakes had no effect and the car proceeded across the street and up the neighbor's driveway and finally stopped just short of their garage door. All this time I was applying the brake repeatedly with no result. Why it stopped just in time to save neighbor's door I don't know. I was too panicked to think of using the parking brake until later. A similar incident had occurred about a year ago in a restaurant drive-through. At that time I rear-ended the car in front about instantly, the cars were so close together. It happened so fast I thought maybe I had pushed both accelerator and brake with one foot, so I called it driver error and thought no more about it. This time there was plenty of time and no doubt about it, I applied the brakes many times and nothing worked until right at the top of their driveway. The current incident happened on May 16, 2021. I had taken the car (Infiniti QX70) to Nissan Reno on May 14 for oil change, filter, and brake fluid exchange, since Infiniti Reno was closed until further notice. The timing makes me wonder whether something happened during the fluid exchange. I haven't been back to Nissan Reno, not sure whether to trust them. This was reported to Ask Infiniti web site, and their suggestion was to take the car to nearest open Infiniti dealer in Roseville CA about 120 miles away. With questionable brakes? I don't think so.

• Dec 10, 2018MD92,000 mi
  Air bags
  For my 2015 infinity QX70, I was told the air bag module within the passenger seat and the occupancy classification system (ocs) which IS part of the airbag system have both gone bad this friday causing my sensor light to come on. the dealer IS saying the only way to repair it IS to replace the…

  For my 2015 infinity QX70, I was told the air bag module within the passenger seat and the occupancy classification system (ocs) which IS part of the airbag system have both gone bad this friday causing my sensor light to come on. the dealer IS saying the only way to repair it IS to replace the entire passenger seat, which I very seldom ever have anyone in my car. Both the QX50 & QX60 have recalls for the same thing, but the QX70 does not. the light just came on friday morning, with no advance notification or issues. I'm told the replacement part for the air bag module IS 873003gw4b and the ocs sensor IS k88206w0y0a

• Jun 19, 2017CA14,718 mi
  Structure › Body
  The sunroof exploded at approx 8AM 5/30/2017. The explosion was preceded by a rattling noise, then a very loud and scary bang. I was traveling approx 65 mph on I80 w (between vacaville and fairfield california). Morning temperature mild--probably in the upper 60'S. I pulled off the highway and…

  The sunroof exploded at approx 8AM 5/30/2017. The explosion was preceded by a rattling noise, then a very loud and scary bang. I was traveling approx 65 mph on I80 w (between vacaville and fairfield california). Morning temperature mild--probably in the upper 60'S. I pulled off the highway and found the sunroof glass had first expanded then shattered. Because the inside roof door was closed, shards of glass did not fall into the car, but they did do some damage to the paint job. Called the dealership who had me bring it in the next day--i was told the repair would not be covered by my warranty nor my extended warranty because they believed something hit the glass. When I told them nothing hit the glass and pointed to the expansion of the glass they still refused to cover the repair. I reported the incident to start farm insurance and they covered the $1850 repair bill. My car was in the shop for over 2 weeks because the replacement glass ordered by the dealership arrived shattered too. They must be using inferior thin glass to have had this happen!

• Sep 28, 2016FL5 mi
  Service brakes

  When sitting with the vehicle stopped, such as at a traffic light, the brake pedal fades and the pedal almost goes all the way to the floor.

• Dec 9, 2015CA
  Exterior lighting

  The interior courtesy lights under the dash remain on when car IS running. during night time driving this IS very distracting to attentive safe driving. according to infiniti, this was engineeried to remain on and there IS no way to turn the light off. the change to the lighting was done on models begining with 2014. in earlier models all the ambient lights go out when the car IS started.

• Jun 8, 2015CO70 mi
  Unknown or other
  The vehicle consistently exhibits a shudder (vibration, tremor) when (1) the vehicle IS warmed (driven at least 10 miles from cold start), (2) moving at a speed above approximately 30 mph, and (3) the throttle pedal IS depressed. usually, but not consistently, the shudder immediately dissipates…

  The vehicle consistently exhibits a shudder (vibration, tremor) when (1) the vehicle IS warmed (driven at least 10 miles from cold start), (2) moving at a speed above approximately 30 mph, and (3) the throttle pedal IS depressed. usually, but not consistently, the shudder immediately dissipates when pressure to the throttle pedal IS released or when the transmission IS put into neutral while the vehicle IS moving. additionally, when the vehicle IS driven into and in a right hand curve, the shudder IS not present regardless of any or no pressure on the throttle pedal. in a left hand curve, however, the shudder IS present often without any throttle pressure. when coasting on a straightaway the vehicle typically, but not consistently, exhibits no vibration. infiniti has found this defect in other Q70S since my reporting of the problem on 20 may 2015. cause/source of problem has not yet been identified to my knowledge. implication of problem on vehicle safety, if any, has yet to be determined.

• Apr 14, 2015FL448 mi
  Seat belts
  In a week old QX-70 with only 448 total miles, while stopped at a traffic light, I leaned forward slightly and left side (floor anchor side) of driver's side seatbelt failed by the hip webbing separating from the floor attachment point. this IS not the right side attachment that IS supposed to be…

  In a week old QX-70 with only 448 total miles, while stopped at a traffic light, I leaned forward slightly and left side (floor anchor side) of driver's side seatbelt failed by the hip webbing separating from the floor attachment point. this IS not the right side attachment that IS supposed to be detachable, but the left floor anchor side. had this occurred in an impact I would have been injured. this attachment point IS of a strange and illogical design in that it has a probe similar to the regular entry/exit seat belt attachment. either in installation or manufacture this floor attachment device was either not installed correctly or IS of a poor design. I am a retired military aircraft accident investigator, safety officer, industrial safety manager, certified safety professional, occupational health and safety technician and an osha authorized outreach instructor as well as a safety engineer. I am very concerned about the potential of injury and/or death with others if this seat belt attachment problem IS common. it IS my understanding that infiniti and nissan uses this same design. the dealer has been excellent in immediately starting an in-company investigation, but I very concerned about this failure. I have photographs available for email. *tr

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11009064DTC B00A0-00 STOREIF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)D
• 11002539INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 11002537CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 11001653CAN COMMUNICATION CODES DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 11001182WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 11001179REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 11001177WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10235451HEADLAMP, FOG LAMP, OR REAR COMBINATION LAMP FOGGING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10233657DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10233614CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10233611ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10232646REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10232645WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10232644WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10222705CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10212027DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10208943BATTERY QUICK CHARGE NOTICE SERVICE INFORMATION When charging the vehicles 12 volt battery with the high amperage quick charge function, the ignition should never be ON, or turned ON, while charging. Attempting to start the vehicle, or turning the ignition ON, while using the high amperage quick charge could potentially damage the fuel pump control module. Only turn the ignition ON when either the ESM or a technical service bulletin service procedure states to do so, and only while using a battery maintainer or smart charger set to reflash mode, or a similar setting. Battery voltage should not exceed 16V during a reprograming operation.
• 10208932EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10208930CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10207844CAN COMMUNICATION CODES DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10206354HEADLAMP, FOG LAMP, OR REAR COMBINATION LAMP FOGGING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10206343CLEANING FRONT OR REAR COMBINATION LAMP ASSEMBLIES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10206332HEADLAMP, FOG LAMP, OR REAR COMBINATION LAMP FOGGING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10199140INTELLIGENT KEY BUTTONS INOPERATIVE BUT REQUEST SWITCHES WORK This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10199139SIGNAL TECH-II INTELLIGENT KEY BATTERY TEST AND SIGNAL CHECK This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10199137CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10192842SERVICE INFORMATION Temporary tire Flat Spotting is common on New Dealer In-Stock vehicles that have not been occasionally moved. Flat Spotting can occur after the vehicle has been parked (not moved) for a few days, or longer. In most cases it is temporary. In extreme cases it can be permanent. Vehicles should be moved every 30 days, in one direction only, enough to rotate the tires 90 (see Figure 1). Moving vehicles as shown in this bulletin will prevent tire Flat Spotting. See this bulletin for further detail.
• 10192806IF YOU CONFIRM A refrigerant leak at a refrigerant pipe/hose joint location, ACTIONS 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. NOTE: Do not replace a refrigerant pipe, hose, or other A/C component if an o-ring seal will solve the leak incident, if it should occur. 2. If no damage is found to the joint metal surfaces, replace the O-ring seal. See this bulletin for further detail.
• 10192802SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Infiniti by request if certain criteria are met. This bulletinlists the criteria and provides an application form for such replacements. See this bulletin for further detail.
• 10192788SERVICE INFORMATION If the clip for the fuel filler cap tether becomes lost or is detached for any reason, it is no longer necessary to replace the fuel filler cap. The clip or "pin" is now available as a separate service part. NOTE - Do not replace the fuel filler cap if only the pin is needed. See this bulletin for further detail.
• 10192763IF YOU CONFIRM: "Brake Judder" during braking, especially when braking at highway speeds. Symptoms of "brake judder": - steering wheel shake - body vibration - brake pedal pulsation IMPORTANT NOTES: If any symptom above occurs when cruising or coasting (not braking), it is not "Brake Judder" and may be tire/wheel related. DO NOT CONFUSE "Brake Judder" with the rapid consistent-speed pedal pulsation that may be felt and only occurs when ABS is activated during hard braking or on slippery road surfaces. ACTION: 1. Inspect the front brake rotors to determine if "machining" ("turning") is possible or if replacement is necessary. 2. Replace both pad pins in both front 4-piston calipers (see PARTS INFORMATION). 3. Replace the front brake pads (see PARTS INFORMATION). See this bulletin for further detail.
• 10192751SERVICE INFORMATION Occasionally customers may notice water vapor or fog in the headlamps. The information, illustrations, and flow chart in this bulletin are provided to help you in determining if an incident for water/condensation in the headlamps is normal or not. Infiniti?s new vehicle limited warranty does not cover physically damaged (cracked or broken) headlamps. All current headlamp assemblies are vented to the atmosphere (not sealed). - This is necessary to allow for expansion and contraction of air from temperature "variations" (warmer or colder) without damage to the headlamp. - Moisture in the air sometimes "travels" into and out of the headlamp assembly through these vents. - Certain environmental conditions may cause moisture to condense. - The fogging/cloudiness should disappear over time when the headlamp is in a dry environment. See this bulletin for further detail.
• 10192745IF YOU CONFIRM The MIL is "ON" with DTC P0603 (ECM BACK UP/CIRCUIT). ACTION 1. Confirm that the battery voltage is 11 volts, or more, with the ignition ON (engine OFF, not running). 2. Erase DTC 3. Perform DTC confirmation steps in the Service Procedure. 4. Confirm 1st trip DTC P0603 is not stored. NOTE: P0603 is often the result of low battery voltage, discharged battery or battery terminal disconnections. Please see this bulletin for furtner details.
• 10192728SERVICE INFORMATION The purpose of this bulletin is to give Infiniti dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due to improper installation or damage to the glass during vehicle assembly. NNA typically does not find any type of cracks in the windshield due to stress after the dealership PDI. See this bulletin for further detail.
• 10192718SERVICE INFORMATION The Intelligent Keys used on the various Infiniti vehicles may not be interchangeable between models and years. See this bulletin for further detail.
• 10192693SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulleitn for further details.
• 10192673SERVICE INFORMATION Design and process changes have been made to improve battery voltage at dealer receipt. Our goal is to deliver vehicles to customers with a 12 volt battery in excellent condition. Proper dealership storage and maintenance of vehicle 12 volt batteries is essential to insuring good battery operating life and customer satisfaction. Dealers are responsible for maintaining vehicles in their inventory. 12 volt batteries in vehicle inventory should always be kept at a full charge to prevent excessive discharge during storage and so they are ready for delivery to customers at any time. See this bulletin for further detail.
• 10192647IF YOU CONFIRM The customer states HomeLink will not operate or has improper operation. ACTIONS 1. To significantly reduce unnecessary repairs, make sure: a. The vehicle is not in "Transit Mode" (if equipped). - Not in Transit Mode: With the turn signal switch is in the OFF (center) position, turn the ignition from OFF to ON. If the turn signal indicators stay OFF (do not illuminate), the vehicle is not in Transit Mode. b. The "Extended Storage Switch" (if equipped) is in the "Customer Delivery" position (pushed in). - The Extended Storage Switch is located on the fuse block that is located in the interior of the vehicle. 2. Confirm the customer is familiar with the HomeLink programming procedure located in the vehicle?s owner?s manual. 3. Test HomeLink operation with special tool HomeLink Transmitter Tester J-41540. See this bulletin for further detail.
• 10192639SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
• 10192616SERVICE INFORMATION The information in this bulletin is provided to help ensure correct diagnosis and repair of fluid leaks. All fluid leaks, when properly diagnosed, should be repaired (whether under warranty or customer pay) to ensure proper vehicle operation. However, certain normal operating conditions can be misdiagnosed as a leak requiring repair. Unnecessary repair or replacement of parts in connection with incorrectly diagnosed "leaks" can negatively impact customer satisfaction, be time consuming and costly, and if not performed correctly can lead to future repairs. See this bulletin for further detail.

Every Infiniti QX70 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.