2009 International 4300
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › 4300 › 2009
These records cover every 2009 International 4300. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2009 International 4300. Newest first.
DUECO Inc. (DUECO), a manufacturer of utility vehicles, is recalling certain Dueco-modified model year 2009-2011 International 4300, 2010 International 4400, 2009 and 2011 International 7400, 2010 Freightliner M2, 2008-2009 GMC C5500, and 2011 Ford F-750 vehicles, equipped with Sure Power DC-DC converters containing a particular epoxy sealing, aka…
Risk and remedy
Risk
Once electrically conductive, the material is capable of melting and burning, increasing the risk of a fire.
Remedy
DUECO will notify owners, and Sure Power will replace the converters, free of charge. The recall began on May 29, 2014. Owners may contact Dueco at 1-800-558-4004.
Navistar Inc. (Navistar) is recalling certain model year 2010-2011 IC bus 3200, model year 2012 and 2014 IC bus CE and model year 2011-2013 IC bus HC transit buses and model year 2008-2013 International 4300 and model year 2013 International Workstar commercial trucks equipped with Eaton hybrid automated transmissions. The software controlling the affected…
Risk and remedy
Risk
The increase in engine speed may result in unintended acceleration, increasing the risk of a crash.
Remedy
Navistar will notify owners and Eaton authorized service facilities will update the Hybrid Control Module Software version, free of charge. The recall began on May 28, 2014. Owners may contact Navistar at 1-331-332-1590.
Navistar has notified nhtsa of a defect on certain model year 2008-2011 international trucks equipped with an optional jump start stud. corrosion at the base of the stud may cause an electrical short between the stud and battery box.
Risk and remedy
Risk
An electrical short may cause a vehicle fire.
Remedy
A final remedy has been established. navistar will notify owners, and dealers will repair the vehicles by installing a new jump start stud. repairs will be preformed free of charge. an interim action will involve the removal of the jump start stud and the connecting cable. the safety recall began on september 10, 2010. owners may contact international dealers at 1-800-448-7825.
Navistar has notified nhtsa about a defect in certain model year 2010 and 2011 ic ce, hc, and be commercial buses and international 1300, 3200, 3300, 4100, 4200, 4300, 4400, and mxt trucks manufactured from november 19, 2003 through february 9, 2010. the parking brake may release if the brake system electronic control unit (ecu) software misinterprets…
Risk and remedy
Risk
Release of the parking brake may cause sudden, unexpected shift in vehicle position possibly resulting in property damage, personal damage, or death.
Remedy
Navistar will notify owners and will repair the vehicles by reprogramming the vehicle's brake system ecu free of charge. the safety recall began on april 14, 2010. owners may contact navistar at 1-260-461-1890.
Navistar IS recall 7,521 my 2009 international model trucks and my 2009 and 2010 ic school and transit buses manufactured from april 1, 2008 to december 12, 2008, equipped with a horton 2-speed fan drive, identified by feature code 12tht. the fasteners that connect the magnet brackets to the air chamber housing of the 2-speed engine fan could fail…
Risk and remedy
Risk
The bracket could separate and strike a person or motor vehicle resulting in property damage, personal injury, and/or death.
Remedy
Navistar will notify owners and repair the vehicles by replacing the engine fan drive air chamber and magnet brackets free of charge. the safety recall IS expected to begin on or about june 1, 2009. owners may contact navistar toll-free at 1-800-448-7825.
Navistar IS recalling 977 my 2009 international 3200, 4100, 4300, 4400 trucks and ic bus hc commercial buses. the front axle bearings in some cases were not sufficiently lubricated during assembly which may result in bearing seizing or possible wheel separation.
Risk and remedy
Risk
A seized bearing on the front axle could result in a vehicle crash which may result in property damage, personal injury, or death.
Remedy
Dealers will inspect the front axle bearings. bearings will be lubricated and replaced if required. the recall began on december 19, 2008. owners may contact navistar at 1-800-448-7825.
Owner complaints
1 complaints
Latest complaints
- Service brakes
TL* the contact owns a 2009 international 4300. The contact stated that while driving at approximately 60 mph, the brake pedal was depressed but failed to respond. The failure recurred on one other occasion. The vehicle was taken to a dealer where it was diagnosed that the hydraulic control unit…
TL* the contact owns a 2009 international 4300. The contact stated that while driving at approximately 60 mph, the brake pedal was depressed but failed to respond. The failure recurred on one other occasion. The vehicle was taken to a dealer where it was diagnosed that the hydraulic control unit needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 13,000. The vin was not available.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 10253979This document is to guide users to eliminate brake pedal rattle noise.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10251409Suggested alignment target values when performing a vehicle axle alignment.
- 10246231J1939 Data Link Source Address Information
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243596General Wheel Speed Sensor Troubleshooting
- 10243595Diagnosis of chassis wander complaints.
- 10241555J1939 Data Link Source Address Information
- 10241554J1939 Data Link Troubleshooting
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10227455J1939 Data link source address information
- 10222490Pico Scope CCOS (Crankcase Separator Test)
- 10219330PicoScope Test One Channel RCT
- 10219325PicoScope Test Resistance and Ohmmeter
- 10219319PicoScope Test for Datalink (CAN) Health Shorts & opens
- 10219314PicoScope Test - Battery Loss of Charge - Parasitic Draw Test
- 10209487Calculating pulses per mile (speedometer setting); only models equipped with International engines
- 10208432ECM Calibration for DPF Replacement; Applies to MaxxForce Engines
- 10208431J1939 Data Link Source Address Information
- 10204139Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
- 10204137J1939 Data Link Troubleshooting
- 10204136Dual Drive Cab Throttle Position Harness for APS/IVS throttle pedals; only models with both left hand and right hand drive.
- 10204134WABCO Full Power Brake Diagnostic Code (DTC) Index
- 10202873How to program parameters after changing WABCO FPB ECU (Parking brake shows N/A)
- 10201758Engine Oil Capacities. All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines
- 10199915General wheel speed sensor troubleshooting
- 10198708Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
- 10189743Suggested alignment target values when performing a vehicle axle alignment
- 10189741Frame Rail Straightness Inspection Procedure
- 10185108ECM Calibration for DPF Replacement; only trucks and busses built with 2007- 2009 MaxxForce DT/9/10. 2010-2012 MaxxForce DT/9/10, 2007-2009 MaxxForce V8, 2008-2009 MaxxForce 11/13 engines
- 10181960Cab Lean Concern
- 10179294Driveline Information Center and Troubleshooting Procedures
- 10179289Repair Procedures for Vehicles Struck by Lightning
- 10177096A/C Refrigerant and Oil Capacities
- 10173025Cleaning and Disinfecting Trucks and Buses
- 10172045J1939 Data Link Troubleshooting
- 10170952Bendix EC80 Blank Module Replacement Program; This document will guide the user through selecting the correct ABS module when it has been determined a replacement is needed. Only Models with EC-80 ABS Controller
- 10169879Key Codes and Key Cutting Information (Not for CV Series)
- 10166287Converting 4000 4 X 2 HPV Models with Hydraulic ABS Brakes to 4 X 4 Configuration may Increase Stopping Distance and is Not Approved by International Truck and Engine Corporation and Merritor Wabco
Every International 4300 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.