1990 Kenworth T800
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Kenworth › T800 › 1990
These records cover every 1990 Kenworth T800. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 1990 Kenworth T800. Newest first.
Sprague wiper assembly pivot can seize due to galvanic corrosion between the zinc-plated steel shaft and the bronze bushings.
Risk and remedy
Risk
This corrosion can cause wiper arm/blade assembly to stopwiping windshield, this could affect driver visibility and result in anaccident.
Remedy
Replace sprague wiper assembly pivot with an assembly not susceptible to galvanic corrosion.
Air brake system was modified by adding a longer air line between the ABS solenoid and the transfer tee to simplify manufacturing. This modification caused the trucks to be in non-compliance with fmvss 121, brake timing test.
Risk and remedy
Risk
The mistimed brake and ABS system may cause the truck tofail the stopping distance requirement of the fmvss, which may lead to anaccident.
Remedy
Remove the extra length of air line and install the transfer tee at the ABS solenoid.
Rear axle stabilizer (sway) bar may not have been properly heat treated.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10040181Paccar: engineering standards have changed and there are now engines with heat treated bolts.
- 10040180Paccar: a software update IS causing the check engine light to come on.
Every Kenworth T800 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.