1999 Kenworth W900
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Kenworth › W900 › 1999
These records cover every 1999 Kenworth W900. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 1999 Kenworth W900. Newest first.
On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
Risk and remedy
Risk
Seizure of the bearings can cause wheel separation or wheel end fire.
Remedy
Dealers will replace all front axle hubs. notification began july 16, 2003. the manufacturer has advised us that parts will not be available until september 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.
Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000. kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from december 11…
Risk and remedy
Risk
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. owner notification began july 15, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4201 or kenworth at 1-425-828-5440.
On certain heavy duty trucks equipped with replacement dana spicer tandem drive axle models ds463 and ds521, installed on vehicles from may 1, 2001 through february 1, 2002, an undersized attachment weld may fracture without warning.
Risk and remedy
Risk
The loss of this attachment to the vehicle chassis can adversely affect vehicle handling or driver control.
Remedy
Dana IS conducting the owner notification and remedy for this campaign. the dealers will remove the suspect bracket, inspect the axle housing, and reweld the bracket to the axle housing. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact dana at 616-567-1088 or kenworth at 425-828-5440.
Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. the tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Risk and remedy
Risk
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. owner notification began october 24, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.
Vehicle description: heavy duty trucks equipped with meritor fg941 steer axles. the gross axle weight rating (gawr) was determined incorrectly and over-stated on the vehicle certification label. with the incorrect gawr listed, these labels do not meet the certification requirements of part 567, "requirements for manufacturers of motor vehicles."…
Risk and remedy
Risk
These vehicles would not be in compliance with federal regulations.
Remedy
Vehicles will be remedied either by assigning the proper weight rating or, if possible, by changing the necessary components to meet the currently assigned weight rating. owner notification began june 22, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by trw. the suspect tie rods contain 24-DL model ball sockets. certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
Risk and remedy
Risk
If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
Remedy
Dealers will replace the defective ball sockets and/or drag links. owner notification began on april 10, 2001, to kenworth owners and on april 25, 2001, to peterbilt owners. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000, peterbilt at 1-940-591-4000 or trw customer service at 1-866-280-3287.
Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. the rear suspension IS regularly subjected to extreme articulation, resulting in flexing of the joint.
Risk and remedy
Risk
Failure of the lower sway arm attaching bolts could result in loss of vehicle control.
Remedy
Dealers will replace the lower sway arm brackets. owner notification began march 27, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
Vehicle description: heavy duty trucks equipped with an optional firewall-mounted circuit breaker. the main cab power and battery power leads were attached incorrectly. this condition can result in the main cab power being unprotected.
Risk and remedy
Risk
If a wiring short occurred anywhere along the cab power circuit, the available battery power could arc and cause subsequent damage to the vehicle or a fire.
Remedy
Dealers will inspect and correct the problem, as needed. Owner notification began february 26, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. the tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Risk and remedy
Risk
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends.
Vehicle description: heavy duty trucks equipped with caterpillar engines and eaton autoshift transmissions. the engines can stall because of software problems.
Risk and remedy
Risk
Increased steering effort can occur.
Remedy
Dealers will update these engines with software changes. caterpillar IS conducting the owner notification and remedy of this recall.
Owner complaints
3 complaints1 involved a fire
What owners report most
Latest complaints
- Service brakes, air
While driving the left rear tandem brake locked up and caught fire (ohio traffic crash report). nlm
- Engine and engine cooling › Engine · Structure › Body › Hood · Visibility › Windshield
Frame rail under hood flexes too much. When driving vehicle hood comes up. when driving down the road vehicle feels as though its going turn over when changing lanes. Contacted dealer, and dealer was not doing anything about problem.*ak consumer stated that new hood cracked at the same place and IS now flexing more, also stress cracks in right windshield, consumer states concern with motor mounts. *tt
- Tires
Tires are wearing out fast, consumer has put three sets of tires on vehicle within the last year.*ak
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10173205Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 10168703Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor.
- 10056911Kenworth: some trucks failed to meet company standards for air volume lift axle and the company will increase air volume for worthwhile improvement to exceed government fmvss 121. Model T800, W900.
- 10045240Kenworth: oil collection at cac intake pipe IS caused by an imbalance in turbocharger pressures. Models T660, T800, T700, and W900.
- 10040181Paccar: engineering standards have changed and there are now engines with heat treated bolts.
- 10040180Paccar: a software update IS causing the check engine light to come on.
- 10027646Kenworth trucks: reduced engine power from fuel starvation. Any model kenworth equipped with the 2007 emissions compliant isx engine and optional davco 382 fuel filter, built prior to 8/11/08,
Every Kenworth W900 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.