2021 Kenworth W900
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Kenworth › W900 › 2021
These records cover every 2021 Kenworth W900. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2021 Kenworth W900. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T660, 2018-2024 Kenworth T800 and W900 vehicles. An additional spacer may have been added to the joint that connects the seat to the seat belt tether and buckle, causing an unsecured connection.
Risk and remedy
Risk
An unsecured seat belt connection may not properly restrain an occupant during a crash, increasing their risk of injury.
Remedy
Dealers will inspect and remove the additional spacer and replace the bolt, as necessary, free of charge. Owner letters were mailed March 20, 2024. Owners may contact PACCAR's customer service at 1-425-828-5888. PACCAR's number for this recall is 23KWK.
PACCAR Incorporated (PACCAR) is recalling certain 2021-2022 Kenworth T680, T880, W990, T800, W900 and Peterbilt 579, 567, 389, 367 vehicles equipped with a Cummins X15 engine. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach.
Risk and remedy
Risk
A detached flywheel can cause loss of drive power, increasing the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, increasing the risk of injury.
Remedy
PACCAR will notify owners, and dealers will properly torque the capscrews and the engine will also be inspected for damage and, if necessary, repaired, free of charge. The recall began on March 29, 2021. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWA and 21PBB.
PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the…
Risk and remedy
Risk
The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.
Remedy
PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 20PBE and 20KWC.
Owner complaints
1 complaints
Latest complaints
- Unknown or other
Transmission issues
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10254164Certain C500/T440/T470/T660/T680/T800/T880/W900 chassis may have air tank reservoirs that do not meet air volume requirements per FMVSS/CMVSS 121 Air Brake Systems. This bulletin will be updated when repair parts and procedures are available.
- 10252592Safety Recall Repair parts and procedures are now available. On certain Kenworth model years 2018 through 2024 C500/T660/T800/W900 trucks with Sears Atlas 70 or 80 series seats, a spacer was installed on the seatbelt mounting assembly. In a severe collision, the ICP bar may fail, increasing the risk of injury.
- 10245636Safety Recall Interim Notification On certain Kenworth model year 2018 through 2024 C500/T660/T800/W900 trucks with Sears Atlas 70 or 80 series seats, an additional spacer was installed on the seatbelt mounting assembly. In a severe collision, the ICP bar may fail allowing the seatbelt to slip, increasing the risk of injury. This bulletin will be updated when repair parts and procedures become available.
- 10238389FIX-AS-FAIL Updated procedures and claim filing information. EPA2021 injector cleaning is referenced in RMI for certain injector faults. Complete the procedures in E290. Refer to E300 for in-tank additive information
- 10238382Certain chassis with Engine Model Year 2016-2021 PACCAR MX-11/MX-13, or EPA13 and EPA21 Cummins ISX12/ISX15/X15 engines that had a previously failed DEF sensor and with DEF sensor software disabled due to industry DEF sensor shortages will now be able to receive a replacement DEF sensor, DEF tank heater coolant control valve, and re-enabled DEF diagnostic software. Please note that chassis equipped with PACCAR PX engines will be eligible for this repair at a future date when software is available.
- 10233554FIX-AS-FAIL Updated procedures and claim filing information. EPA2021 injector cleaning is referenced in RMI for certain injector faults. Complete the procedures in E290. Refer to E300 for in-tank additive information
- 10233553PACCAR will reimburse customers for the local purchase of in-tank fuel additive for EPA2021 compliant MX engines. This is a one-time reimbursement. Only customers who have received E290 injector cleaning qualify for this reimbursement. See bulletin for limits and purchase tracking requirements.
- 10231101This campaign is the final opportunity to replace the oil filter screw cap to reduce occurrences of broken bypass valve tabs. Broken oil valve tabs can cause oil flow obstruction to critical engine parts, resulting in serious engine damage. Customers that do not receive this repair may be responsible for progressive engine damage caused by broken oil bypass valve tabs.
- 10225578Info Only - PACCAR is introducing Over-the-Air (OTA) software updates for engine MY17 and newer chassis equipped with Cummins X15, X12, ISX12, ISX12N, L9N, PX-7, and PX-9 engines The technology will leverage the existing Remote Diagnostic cs hardware to deliver secure software updates remotely. This will reduce downtime and save on maintenance costs for eligible vehicles.
- 10218895Kenworth is providing guidance for PACCAR MX Engine Composite Oil Pan leak troubleshooting to avoid over-repairs and to provide warrantable repair guidance. Oil leaks, if not repaired, can lead to severe engine damage.
- 10213089Safety Recall Interim Notification - The Dana D-Series front axle steer arm fasteners that attach the steer arm to the steering knuckle may fail, increasing the risk of a crash or injury. Repair information will be added when a repair procedure and parts are available.
- 10209712nformation Only New Level 1 required tools are available to support MY21B MX engines.
- 10208770Due to major data carriers phasing out 3G networks, chassis currently utilizing first generation Peoplenet Mobile Gateway (PMG001) will experience severe 3G service degradation as early as January of 2022. Chassis currently utilizing 3G antennas as a primary antenna may experience this degradation
- 10207155Non-Safety Campaign Sun Visors are available. Parts will be shipped to dealers.
- 10206066Information Only: Due to differences between the PACCAR MX-11 or MX-13 2021A and 2021B engines, technicians must be able to identify which of these engines are in a chassis.
- 10203782Non-Safety Campaign - Convex mirrors are available. Parts will be shipped to dealers.
- 10201965Fix-As-Fail Due to undersupply issues, only a limited supply of Diesel Exhaust Fluid (DEF) sensors are available. As a temporary solution, after PACCAR confirms a DEF sensor is not available, a temporary software update will allow a vehicle to continue operation with a failed DEF sensor by disabling the DEF sensor diagnostics.
- 10201956Information Only - Rear axle Quarter Fenders with less than two inches of clearance between the top of the quarter fender and the bottom of the trailer/equipment are susceptible to damage. The lack of clearance could result in cracked/broken quarter fenders or complete separation if undetected or un-remedied.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10185190Fix-As-Fail - Prior versions of Eaton Endurant transmission software may be prone to setting Linear Clutch Actuator (LCA) fault codes leading to possible LCA hardware replacement.
- 10182216Fix-As-Fail The Battery Management System (BMS) may report the incorrect battery condition. Additional diagnostics are available to correctly determine and repair the root cause of the issue.
Every Kenworth W900 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.