2001 Mack CH
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2001 Mack CH. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2001 Mack CH. Newest first.
On certain chassis built with lng engines, the nexgen lng tank's primary and secondary relief valves could fail to open and relieve tank pressure.
Risk and remedy
Risk
This could cause ice buildup on the discharge side of the primary and secondary pressure system allowing the relief system to freeze and become blocked resulting in over pressurization of the lng tanks creating the risk of catastrophic tank rupture which could cause serious injury or death.
Remedy
Dealers will retrofit the lng tanks with a new primary relief valve pipe away tube and a new ventilated shroud. the recall began april 6, 2004. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3337.
On certain heavytrucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
Risk and remedy
Risk
Seizure of the bearings can cause wheel separation or wheel end fire.
Remedy
Dealers will replace all front axle hubs. owner notification began on oactober 14, 2003. customers will be informed of parts availability by october 3, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
On certain class 8 heavy duty trucks equipped with r. H. Sheppard M90 steering gears, an incorrect hose was used for the high-pressure line between the power steering pump and the steering gear. the hose IS rated at 2000 psi, while it should be rated at 3000 psi.
Risk and remedy
Risk
This hose could develop a leak or burst while in service. should the line burst, steering control would still be maintained, but a loss of power assist will be experienced.
Remedy
Dealers will replace the steering hose. owner notification began march 22, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011.
Vehicle description: trucks equipped with e-tech engines. a condition exists on the auxiliary drive shaft of the e-tech engine that causes the loss of power steering on vehicles where the power steering pump IS mounted off the front of the engine.
Risk and remedy
Risk
This could result in the loss of power steering.
Remedy
Dealers will inspect the vehicles and replace the nut that holds the gear to the auxiliary drive shaft. owner notification began march 22, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011.
Vehicle description: heavy duty trucks equipped with certain meritor-wabco brake system two and four port relay valves. the valve may stick open when a high-pressure application IS released.
Risk and remedy
Risk
When the valve sticks open, it can result in a total loss of air from either the service or the park brake system. the driver may lose braking ability under a service application, possibly resulting in a vehicle crash.
Remedy
Dealers will replace these valves. owner notification began november 16, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011 or meritor wabco at 800-535-5560.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Integral hub and bearing assembly
The companies involved in this matter are: skf (hub mfr), arvinmeritor (front axle mfr), and mack (manufacturer of class viiitractor/trucks).skf identified manufacturing defects for specific build dates on front axle hub and bearings (wheel bearings) supplied to arvinmeritor.as a result, arvinmeritor notified mack of…
The companies involved in this matter are: skf (hub mfr), arvinmeritor (front axle mfr), and mack (manufacturer of class viiitractor/trucks).skf identified manufacturing defects for specific build dates on front axle hub and bearings (wheel bearings) supplied to arvinmeritor.as a result, arvinmeritor notified mack of axles supplied with possible defective front hub assemblies.as a result of that notification, 998 trucks are being recalled by mack for defective front axle wheel bearings which may fail in such a way that a wheel separation or wheel bearing fire occurs.see attached summary report for additional details.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008366CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.
- 10246086TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the current standard shaft and can now be used as a replacement part instead of the standard shaft. The new HD shaft has a new design to increase strength, longevity and life over the standard shaft.
- 10241946TSB: Barksdale Leveling Valve, Leak Test
- 10238788V-MAC III Odometer And Engine Hours Programming
- 10237339CBR: eWarranty To UCHP Labor Code ( SCC Code ) Crossover, Conversion Information For Use With Campaigns ( FI, PI ) And Recalls ( EC, SC ), Location On Trucks Dealer Portal ( TDP )
- 102189132009 Document reformatted to be published as a TSB in Impact. Day cab Conversion Closure Panel
- 10215315Programming Failure - Chassis With Cummins Engine And An Allison Transmission
- 10215312(Back Office) - Cruise Control Inoperative After Updating Software VECU5 Without ESP Package (UESP).
- 10215289Automated Manual Transmission ( AMT ) I-Shift / mDRIVE - Ribbon Harness Replacement - Speed Sensor Bolts, Possible Fault Codes P1058 - 21 Or MID 130 PID 161 FMI 1
- 10215287US10 Emission Engines - Diagnostic Trouble Code ( DTC ) SPN 1231 FMI 9 Troubleshooting.
- 10213658Emcon (Spark Assist) Engine Aftertreatment System Troubleshooting Check Sheet - US07 Emissions
- 10213652Low Oil Pressure Diagnostic Process For 11 Liter Engines
- 10213644Premium Tech Tool ( PTT ) Training Materials And Support Tools
- 10213642No Start Condition After Over The Air Programing - VECU5 No Start "Safe State"
- 10213641Temperature Sensor Troubleshooting Guide - US10+OBD13 And Newer
- 10213640Electronically Controlled Suspension (ECS) Losing Air Pressure
- 10213639Low Voltage Disconnect (LVD), Function Description
- 10213638DEF Pump Troubleshooting Guide - US10+OBD13 And Newer Emissions
- 10213637DEF Pump Cycling periodically Hours After Key Off
- 10213636Selective Catalytic Reduction (SCR) Muffler Troubleshooting Guide - US10+OBD13 And Newer Emissions
- 10213633USE FOR NEW VEHICLES (US21+OBD22 Emissions) - Intermittent Diagnostic Trouble Codes U02A3, U029D, U029E
- 10213632NOx Sensor Troubleshooting Guide - US10+OBD13 And Newer Emissions
- 10213630Mack Chassis - Vehicles Equipped With An Automated Manual Transmission Model F ( AMT-F, mDrive ), Premium Tech Tool ( PTT ) Gearbox Calibration Failure; Gearbox Calibration Operation Stops And Fails At 33% When Run With Transmission Removed
- 10213625Mack - PTO Pump Speed Calculator
- 10213612(Back Office Only) Mack Chassis - Cruise Control Inoperative After Disabling The Electronic Stability Program (ESP)
- 10213609Mack Chassis - Diesel Exhaust Fluid ( DEF ) System Cleaning/Flush After DEF Pump Failure Or System Contamination
- 10213608Mack Chassis - Bendix Vendor Configuration Program ( VCP ) Software Download Information
- 10213605Mack Chassis - Diagnostic Trouble Codes ( DTC's ) - P020113, P020213, P020313, P020413, P020513, P020613, Cylinders 1 Through 6 Injector A Open Circuit
- 10130447Diagnostic Trouble Code ( DTC ) P02FA Illuminating The Malfunction Indicator Lamp (MIL) - US17 (GHG17, Common Rail Fuel System) Chassis ONLY
- 10130444Diagnostic Trouble Code ( DTC ) P0471 Illuminating The Malfunction Indicator Lamp (MIL) - US17 (GHG17, Common Rail Fuel System) Chassis ONLY
- 10130443Diagnostic Trouble Code ( DTC ) P0420 Illuminating The Malfunction Indicator Lamp (MIL) - US17 (GHG17, Common Rail Fuel System) Chassis ONLY
- 10130439Fuel Injector Offset Learning Diagnostic Trouble Codes ( DTC ) / Fault Codes Logged In Engine Control Module ( EMS ); Possible Rough / Uneven Idle - OBD15 Chassis
- 10040051Mack trucks: there IS revised mounting hardware for the exhaust manifold and turbocharger.
- 622248Subject regarding heater blower motor replacement.
Every Mack CH model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.