2011 Mack Granite (gu)
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mack › Granite (gu) › 2011
These records cover every 2011 Mack Granite (gu). To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2011 Mack Granite (gu). Newest first.
Mack Trucks, Inc. (Mack) is recalling certain 2010-2016 Granite (GU) trucks. Vehicles remedied under Recall 15V804 (SC0398) may have had incorrect parts installed during subsequent repairs. The incorrect parts may cause a brake imbalance between the steer and drive axle brakes and the rear brakes to overheat.
Risk and remedy
Risk
Overheated brakes may cause a tire blowout or fire, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the brake chambers as necessary, free of charge. Owner letters were mailed April 14, 2026. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0491. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning December 22, 2025. Owners who received a remedy under Recall 15V804 (SC0398) must have the new remedy completed.
Mack Trucks, Inc. (Mack) is recalling certain model year 2010-2016 Granite 4X2 trucks manufactured September 17, 2009, to July 31, 2015. Due to a brake imbalance between the steer and drive axle brakes, the rear brakes may overheat.
Risk and remedy
Risk
If the rear brakes overheat there would be an increased risk of a tire blowout or a wheel-end fire.
Remedy
Mack will notify owners, and dealers will replace either the brake chambers on the steer axles or the drive axles to correct the imbalance, free of charge. The recall began on January 27, 2016. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0398.
Mack Trucks, Inc. (Mack) is recalling certain model year 2010-2016 Granite (GU), LR, and TerraPro (LEU, MRU) trucks manufactured November 17, 2009 to October17, 2015. The affected trucks have engines with a turbocharger oil supply line that may contact or interfere with the turbocharger inlet elbow, clean air intake clamp, or the air fuel control tube, and…
Risk and remedy
Risk
If the turbocharger oil supply line oil leaks in the proximity of the engine exhaust manifold there would be an increased risk of a fire.
Remedy
Cummins will notify owners on behalf of Mack, and dealers will inspect for oil supply line interference or damage, eliminating the interference and replacing the oil supply line, as necessary, free of charge. The recall is expected to begin November 30, 2015. Owners may contact Cummins at 1-800-343-7357 or Mack customer service at 1-800-866-1177. Cummins' number for this recall is SC0396.
Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2016 Granite (GU) trucks manufactured September 24, 2011, to July 1, 2015. The affected trucks may be equipped with an air brake system reservoir that does not have a sufficient volume. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS)…
Risk and remedy
Risk
If the air brake system reservoir has as insufficient volume, braking performance may be affected, increasing the risk of a crash.
Remedy
Mack will notify owners, and dealers will add additional air brake reservoir volume, free of charge. The recall began on October 15, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0394.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008377CBR: Automated Manual Transmission (AMT) Model D or F (mDrive and I-Shift, AMT-D, AMT-F) - Transmission Oil Leakage From Transmission Input Shaft Seal Or Output Shaft Seal - US10 And Newer Emissions, Common Model Years 2010 And Newer
- 11008368CBR: The procedure to eliminate the Mack Chassis "Air Restriction Light On" seen in the cluster is to confirm that the parameter YYT is set to "Enable" with Premium Tech Tool.
- 11008366CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.
- 11006925CBR: 11L, 13L, And 16L Engine Oil Analysis Specifications - US10 And Newer Emissions
- 11006923CBR: Mack chassis with an mDRIVE transmission, there have been reports of complete shift assemblies and TECUs being replaced due to technicians being unable to pinpoint the source of the air leak.
- 11003042CBR - Accelerator Pedal: Inspection Instructions
- 11000831CBR: Vehicles built with an 11 liter engine may experience a complaint of excessive fuel in the oil. It is possible that the source of the fuel is the rear fuel galley plug in the cylinder head. A new and improved fuel galley plug has been developed to resolve this issue.
- 10251333CBR -Telematics Gateway (TGW) Connect Ability Issues
- 10251331CBR - Active "Set Park Brake" Message On Drivers Information Display (DID).
- 10251329CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
- 10248101CBR: For vehicles equipped with an 11L engine, the plastic saddle bracket holding the a/c line on the left side of the engine may move excessively and rub the area where it secures the line.
- 10246086TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the current standard shaft and can now be used as a replacement part instead of the standard shaft. The new HD shaft has a new design to increase strength, longevity and life over the standard shaft.
- 10241946TSB: Barksdale Leveling Valve, Leak Test
- 10241945TSB: Air Restriction Indicator
- 10237374Service Literature Published and Released in May, 2023
- 10237342CBR: Diagnostic Trouble Code (DTC) P215A-64, Fault Code SPN 84 FMI 19
- 10237339CBR: eWarranty To UCHP Labor Code ( SCC Code ) Crossover, Conversion Information For Use With Campaigns ( FI, PI ) And Recalls ( EC, SC ), Location On Trucks Dealer Portal ( TDP )
- 10235490TSB: Vibration Diagnostics
- 10235489TSB: Stock Vehicle Storage and Maintenance
- 10235488TSB: Frame Flange Relief Cut-out Templates with 105 millimeter Frame Flanges
- 10235486TSB: New Vehicle Safety Certification Requirements for Vehicles, U.S. and Canada
- 10235365CBR: Mack Granite - Diagnostic Trouble Code (DTC) P208464
- 10235363CBR: Mack Chassis - Allison Reduced Engine Load At A Stop (RELS) Diagnostic Trouble Code P071a Or P07ce - GR,TE,LR Models - Non-Split/Drop Box PTO
- 10235362CBR: Mack NOx Sensor Troubleshooting Guide - US10+OBD13 And Newer Emissions
- 10232613Mack MMD Alternator Pulley
- 10232609Mack Chassis - No Gauge Cluster Backlight
- 10232608Mack DEF Pump Troubleshooting Guide - US10+OBD13 And Newer Emissions
- 10232585Barksdale Height Control Valve Troubleshooting Guide
- 102286302007 document reformatted to be published as a TSB in Impact. Lateral cab movement bracket.
- 10222608TSB-Charge Air Cooler t-clamp install.
- 102190822009 Document reformatted to be published as a TSB in Impact. Axle Carrier Pinion Angles
- 102190812009 Document reformatted to be published as a TSB in Impact. Axle Alignment Specifications
- 102190792009 Document reformatted to be published as a TSB in Impact. Air-Operated Clutch Assist Adjustment and Troubleshooting
- 10215315Programming Failure - Chassis With Cummins Engine And An Allison Transmission
- 10215314NOx Sensor Troubleshooting Guide - US10+OBD13 And Newer Emissions.
- 10215312(Back Office) - Cruise Control Inoperative After Updating Software VECU5 Without ESP Package (UESP).
- 10215307Selective Catalytic Reduction (SCR) Muffler Troubleshooting Guide - US10+OBD13 And Newer Emissions.
- 10215305DEF Pump Troubleshooting Guide - US10+OBD13 And Newer Emissions.
- 10215295Warranty Automated Manual Transmission ( AMT, I-Shift, mDrive ) Control Housing Assembly; Guidelines For Filing A Claim For Chassis Return Visit With Transmission Issues After A Repair Requiring Control Housing Removal And Reinstallation - US07 And N.
- 10215291Premium Tech Tool (PTT) - Message For Data Mismatch, Product Configuration Mismatch; Instruction To Run An Accessory Kit Displayed When Attempting To Run Diagnostics For Diagnostic Trouble Codes (DTC) Or Programming - US10+OBD13 And Newer Emissions,
Every Mack Granite (gu) model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.