1999 Mack RD
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 1999 Mack RD. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 1999 Mack RD. Newest first.
On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
Risk and remedy
Risk
If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
Remedy
Dealers will replace the ball socket assemblies. this campaign will supersede nhtsa recall nos. 01V-140-005 (mack sc0270) and 00v-246-103 (mack sc0262). Owner notification began december 27, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
On certain heavy duty trucks equipped with dana spicer tandem drive axle models ds463, an undersized attachment weld may fracture without warning.
Risk and remedy
Risk
The loss of this attachment to the vehicle chassis can adversely affect vehicle handling or driver control.
Remedy
The dealers will remove the suspect bracket, inspect the axle housing, and reweld the bracket to the axle housing. owner notification began april 22, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
Vehicle description: class 8 trucks equipped with felsted electronic accelerator pedals. the return springs can break on the accelerator pedals that are equipped with stainless steel or electroplated wire return springs.
Risk and remedy
Risk
This condition could cause the pedal to go to full throttle if both return springs break, increasing the risk of a crash.
Remedy
Replacement accelerator pedals equipped with return springs manufactured of music wire with one additional coil on each spring and with an organic coating, eliminating electroplating will be installed.
Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. the tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Risk and remedy
Risk
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10241946TSB: Barksdale Leveling Valve, Leak Test
- 10238788V-MAC III Odometer And Engine Hours Programming
- 10237339CBR: eWarranty To UCHP Labor Code ( SCC Code ) Crossover, Conversion Information For Use With Campaigns ( FI, PI ) And Recalls ( EC, SC ), Location On Trucks Dealer Portal ( TDP )
- 10215315Programming Failure - Chassis With Cummins Engine And An Allison Transmission
- 10215312(Back Office) - Cruise Control Inoperative After Updating Software VECU5 Without ESP Package (UESP).
- 10215289Automated Manual Transmission ( AMT ) I-Shift / mDRIVE - Ribbon Harness Replacement - Speed Sensor Bolts, Possible Fault Codes P1058 - 21 Or MID 130 PID 161 FMI 1
- 10215287US10 Emission Engines - Diagnostic Trouble Code ( DTC ) SPN 1231 FMI 9 Troubleshooting.
- 10213658Emcon (Spark Assist) Engine Aftertreatment System Troubleshooting Check Sheet - US07 Emissions
- 10213652Low Oil Pressure Diagnostic Process For 11 Liter Engines
- 10213644Premium Tech Tool ( PTT ) Training Materials And Support Tools
- 10213642No Start Condition After Over The Air Programing - VECU5 No Start "Safe State"
- 10213641Temperature Sensor Troubleshooting Guide - US10+OBD13 And Newer
- 10213640Electronically Controlled Suspension (ECS) Losing Air Pressure
- 10213639Low Voltage Disconnect (LVD), Function Description
- 10213638DEF Pump Troubleshooting Guide - US10+OBD13 And Newer Emissions
- 10213637DEF Pump Cycling periodically Hours After Key Off
- 10213636Selective Catalytic Reduction (SCR) Muffler Troubleshooting Guide - US10+OBD13 And Newer Emissions
- 10213633USE FOR NEW VEHICLES (US21+OBD22 Emissions) - Intermittent Diagnostic Trouble Codes U02A3, U029D, U029E
- 10213632NOx Sensor Troubleshooting Guide - US10+OBD13 And Newer Emissions
- 10213630Mack Chassis - Vehicles Equipped With An Automated Manual Transmission Model F ( AMT-F, mDrive ), Premium Tech Tool ( PTT ) Gearbox Calibration Failure; Gearbox Calibration Operation Stops And Fails At 33% When Run With Transmission Removed
- 10213625Mack - PTO Pump Speed Calculator
- 10213612(Back Office Only) Mack Chassis - Cruise Control Inoperative After Disabling The Electronic Stability Program (ESP)
- 10213609Mack Chassis - Diesel Exhaust Fluid ( DEF ) System Cleaning/Flush After DEF Pump Failure Or System Contamination
- 10213608Mack Chassis - Bendix Vendor Configuration Program ( VCP ) Software Download Information
- 10213605Mack Chassis - Diagnostic Trouble Codes ( DTC's ) - P020113, P020213, P020313, P020413, P020513, P020613, Cylinders 1 Through 6 Injector A Open Circuit
- 10027765Mack trucks: cracks in lower frame flange. On certain cv and rd model chassis equipped with constant section frame rails, cracks may develop in the lower frame flange in the area of the steering gear.
- 604092Subject on installation of new-style height control valve for al suspension originally built with height control valve and separate pilot dump valve.
Every Mack RD model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.