2017 Mack Terrapro (mru)
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mack › Terrapro (mru) › 2017
These records cover every 2017 Mack Terrapro (mru). To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2017 Mack Terrapro (mru). Newest first.
Mack Trucks, Inc. (Mack) is recalling certain 2008-2019 TerraPro (MRU) and 2019-2022 TerraPro (TE) vehicles. A brake control valve air leak into the attached exhaust hose can create excessive back pressure, causing the parking brake to release unexpectedly.
Risk and remedy
Risk
The unexpected release of the parking brake may allow the vehicle to rollaway, increasing the risk of a crash.
Remedy
Dealers will remove the exhaust tube and fitting from the valve, free of charge. Owner notification letters were mailed February 8, 2022. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0433.
Mack Trucks, Inc. (Mack) is recalling certain model year 2016-2017 Granite (GU) and TerraPro (MRU) trucks manufactured from November 9, 2015, through January 19, 2016. The affected trucks may be missing a roll pin to secure the upper steering yoke to the steering shaft.
Risk and remedy
Risk
If the roll pin is missing, the steering shaft may disconnect from the yoke, resulting in a complete loss of steering and increasing the risk of a crash.
Remedy
Mack will notify owners, and dealers will inspect the vehicles and replace the steering shaft if the roll pin is missing, free of charge. The recall began on April 1, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0400.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Vehicle Roll Away
On April 1, 2020, following information received from the Office of Defects Investigation (ODI) network of fleet contacts, ODI opened PE20-003 to investigate reports of vehicle roll away in certain model year (MY) 2008-2020 Autocar and Mack refuse trucks equipped with certain Bendix PP-1 push-pull pneumatic park brake…
On April 1, 2020, following information received from the Office of Defects Investigation (ODI) network of fleet contacts, ODI opened PE20-003 to investigate reports of vehicle roll away in certain model year (MY) 2008-2020 Autocar and Mack refuse trucks equipped with certain Bendix PP-1 push-pull pneumatic park brake control valves with a pipe-away exhaust configuration. Prior to ODI’s investigation,[KK(1] Bendix Commercial Vehicle Systems LLC (Bendix), the subject component manufacturer, published two related technical service bulletins (TSBs): Bendix Push-Pull Type Control Valves Service Data SD-03-3611 Rev. 007 (2019-03) and Bendix PP-1 & PP-8 Park Control Valve Wear and Replacement Notice Technical Bulletin TCH-003-056 (2019-11-20). ODI sent Information Request (IR) letters to motor vehicle manufacturers Autocar LLC (Autocar) and Volvo Trucks North America/Mack Trucks, Inc. (Volvo/Mack) and motor vehicle equipment manufacturer Bendix. IR response data from all three manufacturers was analyzed and cross-referenced to gain further understanding. To date, ODI is aware of 5 vehicle roll-away incidents related to the alleged defect condition in the subject vehicles equipped with the subject components, resulting in 4 crashes and 1 injury. On December 9, 2021, Volvo/Mack notified the agency of a safety recall (21V953) to address a safety defect in certain MY 2008-2019 TerraPro (MRU) and MY 2019-2022 TerraPro (TE) trucks originally equipped with the subject components. [KK(2] On January 1, 2023, Autocar notified the agency of a safety recall (23V023) to address a safety defect in certain MY 2008-2020 ACX (Xpeditor), MY 2012-2020 ACMD (Xpert), MY 2010-2020 ACTT (Xspotter), MY 2008-2010 WX and MY 2008-2010 WXLL trucks. Volvo/Mack and Autocar's recall remedies involve removing the vent line fitting threaded into the exhaust port of the subject PP-1 valve. [VD(3] Both Autocar and Mack have stopped equipping new refuse trucks with park control valves using the exhaust pipe-away configuration. After discussions between ODI and Bendix concerning ways to prevent new PP-1 valves from being sold and installed with a potential for the exhaust to become restricted, Bendix will take the following actions: 1) issue a letter to all original equipment (OE) customers with important safety information warning them about the safety risk of attaching plumbing to the exhaust port when the subject component is used as a park control valve; and 2) affix a warning label on all aftermarket parts warning not to install pipe-away exhaust port plumbing. In view of the recalls being conducted by Volvo/Mack and Autocar, and the actions taken by Bendix, ODI has closed this Preliminary Evaluation. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist in equipment or other model or MY vehicles that have not been recalled. The agency reserves the right to take further action if warranted.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10253804CBR: Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F, mDrive) Missing X1 Value In VDA And Default Settings Guidelines, ParameterP1AOB; Fault Code P1052-54, Error 40,Or Error 18 Encountered During Clutch Or Tran.
- 10251333CBR -Telematics Gateway (TGW) Connect Ability Issues
- 10251331CBR - Active "Set Park Brake" Message On Drivers Information Display (DID).
- 10251329CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
- 10251328CBR - Driveline Noise, Suspension Ride Height Too High, Suspension Will Not Exhaust - Chassis Built 2016w01 And Newer.
- 10249553CBR: TGW Will Not Connect After SIM Card Replacement
- 10249551CBR: Frame Or Cab Lean
- 10248101CBR: For vehicles equipped with an 11L engine, the plastic saddle bracket holding the a/c line on the left side of the engine may move excessively and rub the area where it secures the line.
- 10246086TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the current standard shaft and can now be used as a replacement part instead of the standard shaft. The new HD shaft has a new design to increase strength, longevity and life over the standard shaft.
- 10243529Owner Notification Letter, Extended Warranty Coverage U113. The Pre-SCR NOx Sensor is the component provided coverage under this warranty extension.
- 10243526Owner Notification Letter, Extended Warranty Coverage U112. The Pre-SCR NOx Sensor is the component provided coverage under this warranty extension.
- 10243504Owner Notification Letter, Extended Warranty Coverage U111. The Fuel Control Module is the component provided coverage under this warranty extension.
- 10243454CBR: Model Year 2017, 2018 - US17GHG Common Rail Fuel System Component Electrical Faults
- 10243453TSB: Aftertreatment Diesel Exhaust Fluid (DEF) Tank, Level Sensor, Replacement
- 10241946TSB: Barksdale Leveling Valve, Leak Test
- 10240231CBR: Programming Failure - Chassis With Cummins Engine And An Allison Transmission
- 10240202CBR: Mack DEF Dosing Valve Diagnostic Trouble Codes (DTC) P202D00, P208E00, P103B00 - US10+OBD13 And Newer Emissions
- 10237354CBR: Model Year 2017 to Current - Fuel Filter Change ( Primary And Secondary ) For The EM - USA17 Emission Engines
- 10237351CBR: Automated Manual Transmission ( AMT ) -Transmission Electronic Control Unit ( TECU ) MID130 PSID 29 FMI 7 /P10AE81 Fault Codes Being Generated
- 10237348CBR: Automated Manual Transmission (AMT) Transmission Kickdown Mode
- 10237342CBR: Diagnostic Trouble Code (DTC) P215A-64, Fault Code SPN 84 FMI 19
- 10235490TSB: Vibration Diagnostics
- 10235489TSB: Stock Vehicle Storage and Maintenance
- 10235486TSB: New Vehicle Safety Certification Requirements for Vehicles, U.S. and Canada
- 10235360CBR: 11L Engines, Non-Common Rail - Air Compressor Coolant Pipe, Parts Substitution - US14+OBD13 To US14+OBD16
- 10232610Mack Model TE,LR - Frame Over Height
- 10232609Mack Chassis - No Gauge Cluster Backlight
- 10228632Timing Gear Plate Inspection
- 10225625Mack Chassis - Fault Code List / Engine Control Module (ECM), Aftertreatment Control Module (ACM), Electrical System Version 4 Diagnostic Trouble Codes (DTC) Model Year 2013 - 2017
- 10222608TSB-Charge Air Cooler t-clamp install.
- 102190842009 Document reformatted to be published as a TSB in Impact. Cab Roof Harness Repair and Pass-Through Hole Modification
- 102190822009 Document reformatted to be published as a TSB in Impact. Axle Carrier Pinion Angles
- 102190812009 Document reformatted to be published as a TSB in Impact. Axle Alignment Specifications
- 10215316DEF Level (UQLS) Sensor Troubleshooting Guide - US17+OBD16 Emissions and Newer.
- 10215315Programming Failure - Chassis With Cummins Engine And An Allison Transmission
- 10215314NOx Sensor Troubleshooting Guide - US10+OBD13 And Newer Emissions.
- 10215312(Back Office) - Cruise Control Inoperative After Updating Software VECU5 Without ESP Package (UESP).
- 10215309Aftertreatment Hydrocarbon Injector (AHI) Troubleshooting Guide - US10+OBD13 And Newer Emissions.
- 10215307Selective Catalytic Reduction (SCR) Muffler Troubleshooting Guide - US10+OBD13 And Newer Emissions.
- 10215305DEF Pump Troubleshooting Guide - US10+OBD13 And Newer Emissions.
Every Mack Terrapro (mru) model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.