These records cover every 2023 Mack Terrapro (mru). To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
10253807CBR: Turbo Compound (TC) Hot Side Noise, Diagnostic Information.
10253804CBR: Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F, mDrive) Missing X1 Value In VDA And Default Settings Guidelines, ParameterP1AOB; Fault Code P1052-54, Error 40,Or Error 18 Encountered During Clutch Or Tran.
10252315Service Campaign: Mack trucks has determined that certain AN, GR, PI, and TE model trucks built with a MP8 engine could experience a reduced clamping load on the turbocharger mounting hardware causing the hardware to become loose. On affected vehicles follow the instructions below to remove the turbocharger and replace the mounting hardware and mounting gasket with new parts.
10252308CBR: Vehicles built with an 11 liter engine may experience a complaint of excessive fuel in the oil. It is possible that the source of the fuel is the rear fuel galley plug in the cylinder head.
10251329CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
10251328CBR - Driveline Noise, Suspension Ride Height Too High, Suspension Will Not Exhaust - Chassis Built 2016w01 And Newer.
10249553CBR: TGW Will Not Connect After SIM Card Replacement
10249551CBR: Frame Or Cab Lean
10248101CBR: For vehicles equipped with an 11L engine, the plastic saddle bracket holding the a/c line on the left side of the engine may move excessively and rub the area where it secures the line.
10246099Parts Sales and Marketing Bulletin: Mack Trucks is excited to announce an additional year warranty program on REMACK AMT mDRIVE Complete Transmissions. This extended warranty of 3 years or 350,000 miles on the transmission will be applicable when dealer installed, required parts are installed and is registered via eService.
10246086TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the current standard shaft and can now be used as a replacement part instead of the standard shaft. The new HD shaft has a new design to increase strength, longevity and life over the standard shaft.
10244808CBR: Vehicle Overspeed Warning Comes Active At A Lower Speed Than Expected; Vehicle Overspeed Warning In Driver Information Display (DID) - Model Year 2018 And Newer With New Style Instrument Cluster