2007 Mercedes Benz C280
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes Benz › C280 › 2007
These records cover every 2007 Mercedes Benz C280. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2007 Mercedes Benz C280. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.
Risk and remedy
Risk
A detached sunroof panel can become a road hazard, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the sunroof panel as necessary, free of charge. Owner notification letters were mailed January 10, 2025. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of previous NHTSA recall number 22V-954. MBUSA's number for this recall is 2024120001/2/3.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please refer to MBUSA's recall report for specific vehicle model details. The glass sunroof panel may not be properly secured and may detach.
Risk and remedy
Risk
A detached sunroof panel may become a road hazard, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the sunroof panel as necessary free of charge. Owner notification letters were mailed February 3, 2023. Owners may contact MBUSA customer service at 1-800-367-6372. This recall expands NHTSA recall number 19V-918. MBUSA's numbers for this recall are 2023010004, 2023010005, and 2023010006.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2007 C350, C230, C280, CLK350, E320CDI, E350 Wagon, E350, 2006 C55 AMG, CLK500, CLS500, CLS55 AMG, E500 Wagon, E500, E55 AMG, 2007 CLK550, CLS550, CLS63 AMG, E550, E63 AMG, and E63 Wagon AMG vehicles. The bonding between the glass panel and the sliding roof frame may deteriorate, possibly causing…
Risk and remedy
Risk
A detached glass panel can separate from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
MBUSA will notify owners, and dealers will inspect the glass panel bonding and replace the sliding roof, as necessary, free of charge. Owner letters were mailed May 7, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of recall number 19V-918. MBUSA's number for this recall is 2021040012.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2001-2011 vehicles. The bonding between the glass panel and the sliding roof frame may deteriorate, possibly resulting in the glass panel detaching from the vehicle. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V918-4126.pdf
Risk and remedy
Risk
A detached glass panel can separate from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
MBUSA will notify owners, and dealers will inspect the glass panel bonding and replace the sliding roof, as necessary, free of charge. The recall began July 10, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020040011.
Owner complaints
56 complaints2 involved a crash1 involved a fire2 injuries
What owners report most
Latest complaints
- Seat belts
driver seat belt. seat belt did not lock during crash with airbag deployment. problem has not been confirmed. police observed the belt not locked in either extended or retracted position after collision. burn marks on belt would indicate belt was in use
- Structure › Body
I have never been contacted about this recall either. This is the second complaint form I have filed. First one filed 12/28/2019.
- Air bags
My Mercedes has never been recalled for the Takata air bag recall and now I have a warning about the SRS, Supplemental Restraint System. What ever happened to vehicles having replacement air bags??
- Steering
June 2, 2025 To Mercedes Customer Service: Safety Issue. This weekend I experienced the most frightening encounter that I ever had in a car. As I was driving on a 4-lane bypass highway at 55MPH my car suddenly and erratically turned to the right almost sending me into the cement bridge guards (I…
June 2, 2025 To Mercedes Customer Service: Safety Issue. This weekend I experienced the most frightening encounter that I ever had in a car. As I was driving on a 4-lane bypass highway at 55MPH my car suddenly and erratically turned to the right almost sending me into the cement bridge guards (I was driving over a river bridge). As I tried to correct the car, it then veered sharply left sending me into the passing lane where other traffic needed to avoid hitting me. Then after the car was stabilized “ESP inoperable” light came on. I had nowhere to pull off on this particular highway and had to continue to drive until I got to an exit. Took to my dealership. Apparently cause is “broken subframe” Not knowing what that meant, I looked it up, only to find a longstanding problem in Mercedes vehicles. I feel fortunate to have avoided a serious accident/injuries. But I have to say I am disappointed in the Mercedes response to this issue and the recall which only focuses on particular years and models impacted by the issue. Subframes, meant to last the lifetime of the car, have been a recurring issue with Mercedes. Apparently the class action law suit covered cars 2010 to 2022 and so even though what happened to me (sudden severe and erratic swerving) is identical to that described in the class action findings and recalls, and my car is still within the 20 year timeframe for free repairs up until 2027, I do not qualify simply because my car is 2007. (~$3500 bill coming my way) I see no logical explanation as to why all cars experiencing a subframe corrosion and breakage would not be covered by the same recall regardless of the year of the car. How is that logical? (Car is still in repair shop. no invoice available yet.)
- Service brakes
Grinding nose after I did the breaks. And when I press the gas it acts like the e brake is on on
- Engine
I am writing about this incident after finding out about the lawsuit filed against Mercedes concerning problems with the balance shaft, the soft metal they used in production, and the COMMON engine codes (P0016 & P0017). I am [XXX] and I was on the highway with my girlfriend going around 75mph and…
I am writing about this incident after finding out about the lawsuit filed against Mercedes concerning problems with the balance shaft, the soft metal they used in production, and the COMMON engine codes (P0016 & P0017). I am [XXX] and I was on the highway with my girlfriend going around 75mph and I smelled a burning smell and thought it might’ve been the truck/one of the cars in front of me. All of a sudden my power steering was gone and my car basically lost all power. Only the brakes worked. Thank god the other cars were far enough away from me and I didn’t put anyone else in danger. Due to the loss of control I was forced to pull into the breakdown lane on the LEFT side which was so incredibly dangerous since the highway was so busy. I eventually pulled to the right side of the highway when there was enough space and time to do so and opened my hood and saw that my tensioner blew and the serpentine belt came off. I was so angry because the dealer that sold me the car told me the codes were only emission related and did not affect the mechanics of the car. That’s a whole other issue. I am not so very mechanically inclined but after extensive research I’ve found that this code (which was covered up by Mercedes) was most likely the culprit and has been causing me issues throughout my experience with the vehicle. I am a broke college student. Yes, it was stupid to buy a Mercedes, but I was [XXX] and I’ve learned a lot about cars and the industry since then. At the end of the day, despite my stupidity and ignorance, Mercedes should be held responsible for this issue and everyone who has [had incidents similar to myself or have the codes that I have deserve to be reimbursed for all the repairs, time, and danger they have and will eventually put people in. Don't wait for someone to die on the highway before you consider issuing a recall. DO SOMETHING. I shouldn’t have to fear for my life going out in this car to get to work, school, and most importantly, my family. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF I
- Steering · Suspension · Unknown or other
I first noticed an issue with the alignment. The vehicle would always pull to the left. After 3 different alignment procedures, it remind the same. I started noticing a clunking sound when I would brake. While driving I hit a moderate pothole and the car lurched side to side, causing me to lose…
I first noticed an issue with the alignment. The vehicle would always pull to the left. After 3 different alignment procedures, it remind the same. I started noticing a clunking sound when I would brake. While driving I hit a moderate pothole and the car lurched side to side, causing me to lose control. It was fortunate that I was on a surface street, and that I was only traveling about 35 mph. I almost struck the vehicle next to me, but my quick reflex prevented it. I limped the car, going 15-20 mph with hazards on, to my mechanic. He called me the next day informing me that I had a complete rear subframe failure. I researched and found that Mercedes, had extended the warranty on all models of the same year but my model was not included. Numerous mercedes of the same year and model are having the same issue. This is an EXTREMELY and dangerous issue that Mercedes need to address. Others my not be so fortunate as I was to have been on a surface road under speed. I would not have been able to control the vehicle had I been traveling at highway speed.
- Fuel/propulsion system
Everytime I fill the gas tank I smell gas strongly I paid out of pocket to have the fuel pump done the gas cap the purge valve and I’m still getting a check engine light for a evap leak and still smelling gas from inside and outside the car I also have a rattle noise comeing from inside the gas…
Everytime I fill the gas tank I smell gas strongly I paid out of pocket to have the fuel pump done the gas cap the purge valve and I’m still getting a check engine light for a evap leak and still smelling gas from inside and outside the car I also have a rattle noise comeing from inside the gas tank u can take the gas cap off and heat it inside the gas tank from outside and inside the car it’s a constant knocking noise inside the gas tank I replaced everything and their is still a knock noise and fuel smell I have proof receipts from Merceds dealer of all work I did and I have videos of the noise I can’t afford a new gas tank I bought the car in Connecticut with a 2 year extended warranty the warranty place won’t cover a new gas tank I saw their were recalls for gas smells on other models same year as mine but not the c class a lot of other people I noticed on google have had this same knocking noise and fuel smell the car only has 70 thousand miles on it I can’t afford 5 grand for a new gas tank and labor espically after I already paid for all this stuff and already had this problem diagnosed but yet everytime I get my car back it’s never fixed but they tell me it’s fixed they have my car for months at a time and never give it back to me fixed I’m always paying for rental cars because of this they won’t supply me with a loaner please put a recall in for these fuel tanks 2007 c280 4 matic only has 70 thousand miles I bought it 4 months ago and no one will fix this properly for me when they have diagnosed this problem multiple times the rattle is the baffles in the fuel tank they keep working their way around it and keep telling me it’s other things just to get my money instead of properly diagnosing it I’m just sick of geting my car back saying it’s fixed when it’s not out of the 4 months I’ve had this car it has Ben in my possession for maybe one of them the other 3 months it’s Ben in and out the shop for the same problem please recall these tanks car has low miles
- Air bags
On 9/18/23 we were hit head on by a person driving a large ford. The air bags deployed on my CClass. I was unable to see after the accident. My nose is huge! Face is bruised. I had severe eye pain. Neck pain etc. There was chrome on the floor after the deployment. Major concern what was in…
On 9/18/23 we were hit head on by a person driving a large ford. The air bags deployed on my CClass. I was unable to see after the accident. My nose is huge! Face is bruised. I had severe eye pain. Neck pain etc. There was chrome on the floor after the deployment. Major concern what was in this airbag. However, I’m sure it saved my life. My car is totaled. It was a fabulous car. We had scheduled a sunroof recall next week at Mercedes in New London, CT. I learned of this recall after my car recently past emissions. My car only had 39,000 miles. I’m going to miss it.
- Power train
Engine Control Unit failed during warranty after replacement by the Mercedes Benz Dealership. The ECU causes stumbling and cutting out of engine in traffic while driving which can cause an accident putting my self, wife and others at risk. I took the car to the dealership and showed them the stored…
Engine Control Unit failed during warranty after replacement by the Mercedes Benz Dealership. The ECU causes stumbling and cutting out of engine in traffic while driving which can cause an accident putting my self, wife and others at risk. I took the car to the dealership and showed them the stored code of 1596 “The engine off time has an implausible value” (P1026) on the Mercedes Benz Xentry DAS software. Yes: the dealer inspected the car and did a diagnostic. The code was cleared and the dealer claimed there was no code. A CHECK ENGINE LIGHT was present when the problem started approximately 23 months after the ECU was replaced be the dealer with a two year advertised and communicated warranty.
- Visibility › Sun/moon roof assembly
The contact owns a 2007 Mercedes-Benz C280. The contact stated while driving approximately 70 MPH, there was a loud sound coming from the vehicle. The contact pulled over safely and noticed that the sunroof had shattered. The vehicle was taken to a local dealer but was not repaired. The manufacturer was notified of the failure; however, no assistance was provided. The approximate failure mileage was 85,500.
- Power train · Steering · Wheels
I was pulling out of my driveway when all of a sudden, the car came to a screeching halt and would not move. I was stuck diagonally in the middle of the road. When I called AAA for a tow they said it looked like the passenger front ball joint failed. Upon inspection, it was found that the ball…
I was pulling out of my driveway when all of a sudden, the car came to a screeching halt and would not move. I was stuck diagonally in the middle of the road. When I called AAA for a tow they said it looked like the passenger front ball joint failed. Upon inspection, it was found that the ball joint failed and the tie rod, lower control arm, and strut all broke as a result. The axel was also ripped out when the control arm failed. All of these things needed to be replaced. I can only image what would have happened if I had been traveling on a main road or highway at a higher rate of speed. But to have a catastrophic failure like this happen was completely unexpected, especially after having brand new tires and an alignment completed only one week earlier. Ultimately, I am unsure if this was due to an error on the tire shop's part with the alignment they did or a Mercedes general quality issue. Either way, my vehicle is inoperable and I'm faced with a $1,700 bill for what should potentially be a recall. To know that another one could fail at any time at any speed with no warning is deeply unsettling and I will be getting rid of the car as soon as possible, likely never buying a Mercedes again.
- Visibility
The contact owns a 2007 Mercedes-Benz C 280. The contact received notification of NHTSA Campaign Number: 19V918000 (VISIBILITY) however, the part to do the recall repair was not yet available. The contact took the vehicle to the local dealer and it was confirmed that the part was not yet available.…
The contact owns a 2007 Mercedes-Benz C 280. The contact received notification of NHTSA Campaign Number: 19V918000 (VISIBILITY) however, the part to do the recall repair was not yet available. The contact took the vehicle to the local dealer and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Engine
My car ran hot and everything on the inside began to flicker. I pulled over and turned the car off to let it cool. When I turned it back on the check engine light was on with the emfamous p0016 and p0017 codes ad I later found out and it has not run thw same since. If drags, shifts incorrectly, and pulls wrong now.
- Fuel/propulsion system
Several times I've filled my gas tank I got a strong smell of gas before entering my vehicle. I had then made sure not to fill the tank up due to this leakage. I believe its very dangerous. The smell doesn't go away until I drive the car for several days.
- Air bags · Structure › Body
I am still waiting for a recall to be completed.
- Seats · Visibility › Sun/moon roof assembly
TL* the contact owns a 2007 mercedes benz C280. The contact received notification of nhtsa campaign number: 19v918000 (visibility) however, the part to do the recall repair was unavailable. Mercedes benz of atlantic city (6623 e black horse pike, egg harbor township, nj 08234) and the manufacturer…
TL* the contact owns a 2007 mercedes benz C280. The contact received notification of nhtsa campaign number: 19v918000 (visibility) however, the part to do the recall repair was unavailable. Mercedes benz of atlantic city (6623 e black horse pike, egg harbor township, nj 08234) and the manufacturer were made aware of the issue and confirmed that parts were not yet available for the recall repair. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact stated that the vehicle experienced the failure listed in the recall. Additionally, the interior roof liner was damaged and became detached due to excessive water pouring into the vehicle. The front driver's seat rail was rusted due to the water causing seat adjustability issues. The failure mileage was approximately 100,000. Parts distribution disconnect. *js
- Fuel/propulsion system
When researching my problem I found this tk he a common problem. if I fill my gas tank it leaks gas. the cabin of car IS flooded with fumes. so many with same car have complained about this.
- Engine · Unknown or other
Hvac mold smell , the car smells like ($#!*) whenever I use ac or heat . Tried like changing 10'S of cabin filter ,but that smell makes me sick all the time. Checked with all the mechanics ,they only say its a manufacturer issue.
- Visibility/wiper
TL* the contact owns a 2007 mercedes-benz c280w4. The contact received notification of nhtsa campaign number: 19v918000 (visibility). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Mercedes-benz southampton (575 county rd 39 s, southampton, ny…
TL* the contact owns a 2007 mercedes-benz c280w4. The contact received notification of nhtsa campaign number: 19v918000 (visibility). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Mercedes-benz southampton (575 county rd 39 s, southampton, ny 11968) was contacted and confirmed that the parts were not available. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Fuel/propulsion system
When the fuel tank IS filled there IS a strong gas order coming from the vehicle.
- Engine · Power train · Unknown or other
P0022 camshaft balancer defect, subject to prior class action, I am having this same problem! Wish to become a part of that prior settled class action or pursue my own action for defective parts
- Fuel/propulsion system
We just bought this car. After I filled it up, there IS strong gasoline smell in the garage. Parked the car outside and it still has smell. IS this a common problem with mercedes benz C280? Upon further research, there was extended warranty from mercedes to cover e class and CLS class fuel odor…
We just bought this car. After I filled it up, there IS strong gasoline smell in the garage. Parked the car outside and it still has smell. IS this a common problem with mercedes benz C280? Upon further research, there was extended warranty from mercedes to cover e class and CLS class fuel odor only. What about the c class cars? Don't believe this IS the way the car should be performing. By the way, the car IS 2007 with 102K miles. I believe mercedes should also cover c class for the same problem,
- Seats
I was driving to work when I smelled heavy burning and my seat became extremely hot. I turned off the seat warmer which at the time was on medium setting and since I could not stop safely, I continued to drive until I was able to stop. I then checked my seat and thats when I saw the heater had…
I was driving to work when I smelled heavy burning and my seat became extremely hot. I turned off the seat warmer which at the time was on medium setting and since I could not stop safely, I continued to drive until I was able to stop. I then checked my seat and thats when I saw the heater had burnt a hole through the seat and also burnt my sweater. I have since then learnt there IS a lawsuit on other same year models by the same manufacturer and hope my incident will raise awareness that this might be an issue that touches more models than mentioned in the lawsuit
- Fuel/propulsion system
Very strong odor of gasoline fills the garage and house when the vehicle IS parked inside after fueling to full tank. The gasoline odor IS so strong that I feel it IS unsafe to park the vehicle in the garage because of the fumes, and the potential for fire
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
- 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
- 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
- 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
- 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
- 10252770As previously reported, to enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a Settlement regarding claims relating to allegations that the 590 Mars Red paint available as an original, exterior color option for certain models of Mercedes-Benz vehicles may experience peeling, flaking, or bubbling of the exterior paint or clear coat. This Mars Red paint is sometimes referred to as Fire Opal. The purpose of this update is to alert you that: 1. The Settlement has received final approval. The Settlement will go into effect on March 11, 2024. As of that date, customers are eligible to receive extended warranty coverage under the Settlement. 2. Under the Settlement, an eligible customer might receive extended warranty coverage as of the date the vehicle is presented to your dealership OR certain customers might have validated Qualified Future Repair claims, making them eligible for a different level of coverage. To determine if a customer: (a) is eligible for extended warranty coverage; and (b) what level of warranty coverage is available to them, please refer to the Service Packages section in VMI/Netstar. 3. Damage code 21800 (damage type 00) must be used for warranty claims covered pursuant to the Settlement. Please note that you should only claim for the percentage of warranty repair cost reflected in VMI/Netstar (see below, e.g., for Period Two, claim only 50% of warranty repair cost). 4. Before the dealership agrees to perform any work: The customer should be given a Repair Order containing: (1) an estimate for the repair, (2) the portion covered under the extended warranty; and (3) the customers contribution amount for the repair, if applicable. The customer must agree to pay their contribution amount for the repair and sign the Repair Order before the repair is performed.
- 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
- 10235978Recall Campaign announcement for Takata driver airbags.
- 10205233Mobile phone cotacts are not transferred completely.
- 10186141NTG5.5: Incorrect time shown on instrument cluster, COMAND display, and analog clock
- 10186135If the customer brakes sharply from a speed of > 30mph, without ABS intervention, there is a single cracking noise from the area of the ESP hydraulic unit
- 10181124Harsh engagement when changing gear range from P to D or R
- 10167563The COMAND unit does not start or the COMAND display remains dark. The COMAND unit cannot be operated. Note: The problem disappears after a lengthy idle period (>6h) or after interrupting the power supply (circuit 30).
- 10167489Noise: A rattling noise may be heard from the area of the chain drive for approx. 2-5 seconds after engine start. And/or: Fault code entries in engine control unit: SIM271DE20: P001177 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The commanded position cannot be reached. P001762 The position of the exhaust camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. The signal comparison is faulty. P001192 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The function or the instruction is faulty. P001195 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The mechanical setup is not OK. P001477 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The commanded position cannot be reached. P001492 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The function or the instruction is faulty. P001495 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The mechanical setup is not OK. P001600 The position of the intake camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. P001662 The position of the intake camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. The signal comparison is faulty. P001700 The position of the exhaust camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft.
- 10166994Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). Heard once when changing from forward to reverse (and vice versa)
- 10166975This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014.
- 10166099Pneumatic comfort systems with insufficient performance, entirely inoperative or leaky.
- 10166095Noise from the front seats during load change.
- 10166087The presence of a quiescent current can have several causes. These are not always recognized and lead to an increased number of OK components being removed. Possible Hall sensor faults or normalization faults can exist which can be eliminated without replacing the control unit.
- 10166085Grunting noise or ripping noise at seat-back lining
- 10166082Noises from area of seat adjuster or cushion frame.
- 10166081Noise complaints when load on backrest frame changes. Affects the driver and front passenger seats. Also perform the remedial action if you are performing work on: - backrest frame - backrest cover or - guide rail of head restraint. If the backrest frame is exposed as a result, the actions must always be performed in order to avoid follow-up repairs.
- 10164810Throttle lift-off clunking noises at drive shafts of front axle
- 10158301Replace Driver-Side and (if applicable) Front Passenger Air Bag
- 10151959Seat belt extender toothed rack sluggish or makes noises
- 10135599Clunking noise from front axle suspension strut or rear axle shock absorber on short strokes of the damper
- 10041208Mercedes benz: engine light IS on with stored trouble codes.
- 10041066Mercedes benz: the turn signal light on the mirror fogs up due to temperature differences.
- 10037408Mercedes-benz: shock absorber procedure.
- 10036933Xentry (mercedes benz): replacing exterior light bulbs. Exterior lights. Li did not match dtb from which it was created. (Main remedy for repair was missing.)
- 10034306Mercedes: airbag durability and reliability. Air bag srs control module (N2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. With 164, 216 221, 251 and newer, the airbag control unit can be reset five times. With modes 202, 210 and newer, the airbag control unit can be reset three times. Earlier models would have to have their airbag control unit and triggered restrain components changed only after an accident. No models or model years listed.
- 10032568Mercedes benz service campaign: see document search button for owner letter. Software calibration number (scn) coding; engine control module. The vehicles fuel tank leak diagnosis system may have been inadvertently deactivated during a visit to the workshop. This may cause the affected vehicles to fail to meet the statutory requirements for inspection and or maintenance (emissions inspection).
- 10032370Mercedes benz: all model 202, 208, 210 equipped with code 472A (electronic stability program) esp indicator lamp illuminated/fault code c1401 or c1405. No model years listed.
- 10030904Mercedes benz: models 203, 209, 211, 219,230, and 463; model years 2005-2007. Replace pilot bushing at electrohydraulic unit. Daimler ag has determined that on affected vehicles the transmission pilot bushing may leak. Dealer will replace transmission pilot bushing .
- 10029504Mercedes: replace transfer case on affected vehicles optimized transfer cases will reduce vibrations when cornering or when parking. Models 203, 211, 220.
- 10028624Mercedes vehicle: the anti-lock brake system (ABS) return flow pump running without control with corresponding fault code c1401, clean and insulated the connector for the return flow pump relay. Models 202 and 208. Model years unknown.
- 10028026Mercedes: replace v belt upper guide pulley. The v belt upper guide pulley optimized for noise reduction IS available. The dealer will replace upper guide pulley at the next workshop visit.
- 10024117All model 171, 203 and 209 vehicles equipped with sales code 477 - tire loss warning system (indirect esp based) with run flat tires. [Tire pressure monitoring inactive] displayed instrument cluster. Model year 2005-2007.
- 10023776Models E320, E500, E55, E350, E550, E63 and S430 4matic, S500 4matic. My 2005-2006 -- replace transfer case. Updated 5/13/09. Models C280, C350, C320 and C240. My 2005-2007.
- 10022893Check engine light on / fault codes fc1200 / fc1208 stored in me-sfi control unit. Mercedes-benz model C230, C280, C350, slk280, slk350, clk350, clk550, E350, E550, cls550, S600, and sl550. Equipped with M272 engine or M273 engine. Updated 8/28/08.
Every Mercedes Benz C280 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.