2010 MINI Cooper S Convertible

Recalls

1 recall names the 2010 MINI Cooper S Convertible. Newest first.

• Engine and engine cooling › Engine › Gasoline › Turbo/supercharger

  Jan 11, 2012NHTSA 12V00800090,368 vehicles

  BMW IS recalling certain model year 2007-2011 MINI cooper s, 2008-2011 MINI cooper s clubman, 2009-2011 MINI cooper s convertible, 2009-2011 MINI cooper jcw, 2009-2011 MINI cooper jcw clubman, 2009-2011 cooper jcw convertible, and 2011 cooper s countryman passenger cars manufactured from november 14, 2006, through january 18, 2011. the electric auxiliary…

  Risk and remedy

  Risk

  The circuit board may smolder which could result in a vehicle fire.

  Remedy

  BMW will notify owners, and dealers will replace the water pump free of charge. the safety recall beganduring february 2012. owners may contact BMW at 1-866-275-6464.

  Full recall details →

Owner complaints

What owners report most

1. Engine4
2. Unknown or other3
3. Air bags2
4. Electrical system1
5. Power train1
6. Steering1

Latest complaints

• Feb 28, 2023CA24,000 mi
  Air bags
  The contact owns a 2010 Mini Cooper Convertible. The contact stated that while driving at an undisclosed speed, the passenger’s air bag warning light was illuminated. The contact referenced NHTSA Campaign Number: 15V205000 (Air Bags). The vehicle was diagnosed by an independent mechanic and it was…

  The contact owns a 2010 Mini Cooper Convertible. The contact stated that while driving at an undisclosed speed, the passenger’s air bag warning light was illuminated. The contact referenced NHTSA Campaign Number: 15V205000 (Air Bags). The vehicle was diagnosed by an independent mechanic and it was determined that the front passenger occupant detection sensor needed to be replaced. The manufacturer was not made aware of the failure. The failure mileage was approximately 24,000.

• Jul 2, 2020IN
  Engine · Unknown or other

  The sound of the motor IS very very noise, and shakes really bad after you start the car.

• Dec 24, 2018HI12,000 mi
  Unknown or other
  The vehicle IS a standard model convertible, not an "s" model. trunk latch malfunction while in motion: trunk latch opens/disengages spontaneously while the vehicle IS in motion, with the key inserted and the motor running. this unpredictable fault can occur anywhere, including on a freeway.…

  The vehicle IS a standard model convertible, not an "s" model. trunk latch malfunction while in motion: trunk latch opens/disengages spontaneously while the vehicle IS in motion, with the key inserted and the motor running. this unpredictable fault can occur anywhere, including on a freeway. the trunk lid can drop to full open, exposing items stored in trunk as possible debris-threat to vehicles following. driver of vehicle IS presented with choice between risking stopping (for example, on the shoulder of a freeway) or risking incident involving following vehicles. eventually, trunk latch will cease all function. replacement cost IS approximately $300 plus labor. vehicle was purchased new. this 2010 model IS driven 2 or 3 times per week for relatively short distances. it has been driven fewer than 30,000 miles on the odometer. this fault has occurred on numerous occasions while vehicle IS in motion over the past 3 years. items in trunk have spilled onto roadway. driver has had to stop and slam the trunk closed. the incidents likely would have occurred many more times if the vehicle had been driven daily and for longer distances. trunk latch system was replaced and the new latch system began malfunctioning in the same manner within 6 months of replacement. date listed below IS the most recent date upon which the incident occurred.

• May 30, 2018SC40,110 mi
  Electrical system

  Latch on trunk unlocks and releases the trunk while driving. this can cause the contents of the trunk to fall on to the road endangering other drivers. this IS a common complaint on the MINI owner site

• Jan 30, 2016NJ52,000 mi
  Engine · Unknown or other

  I was driving on I 280 east and newar exit 8B the engine suddenly stopped. There was loss of power steering and steering wheel became very tight. I almost got hit by a tractor. I got out of the exit (exit 7) and got myself towed. The mechanic thinks it IS the timing belt that IS broken.

• Mar 7, 2015AL30,000 mi
  Engine

  Knocking, timing. Over 2 thousand signatures of owners having the same issue. *tr

• Oct 11, 2013AZ10,500 mi
  Engine

  Engine noise due to timing chain and tensioner defect. if the chain or tensioner fail completely this could cause the vehicle to stall in moving traffic or create a roadside hazard. *tr

• Apr 8, 2012CT
  Air bags

  The airbag "off" light comes on intermittently when a passenger IS in the seat. dealer says there IS nothing wrong but problem persists. *tr

• Oct 1, 2010CA39,400 miFire
  Steering
  MINI cooper s convertible 2006, less than 40K miles. I was driving for maybe 6 miles and while I was making a left hand turn I felt the steering wheel was not functioning correctly and the car was moving very oddly so I pull over immediately to check what's wrong with the car. Noticing the smoke…

  MINI cooper s convertible 2006, less than 40K miles. I was driving for maybe 6 miles and while I was making a left hand turn I felt the steering wheel was not functioning correctly and the car was moving very oddly so I pull over immediately to check what's wrong with the car. Noticing the smoke form the hood before I got out the car and thought my car was over heated. I thought I would just call the roadside service to help. But what had took place next was something I can only imagine from a movie set ....smoke..heavy smoke...flame fire. Fire department came and they would not able to open the hood so instead they cut the hood open and was able to put off the fire. The car was total. I just had the service one month ago at the dealer (replace battery, wheel alignment, rotation tires and 32 point inspection)and like all the previous services was done at the dealer. I don't know what exactly had happen to the car, my insurance co claimed that there IS no recall by bmw/mini on the car so they don't see the point to spend money and time to check into what had caused the fire...but I wanted to know as a car owner and a near death experience. I think I am entitle to and to prevent this happen to more MINI owner. Please help! *Tr

• Jan 17, 2010AZ3,700 mi
  Power train › Manual transmission

  Complete clutch failure with only 3700 miles on carl it was replaced by dealer but "not covered by warranty" dealer claims excessive wear and tear in car that IS not abused. *Tr

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Engine compartment fire

  PE11036Opened Oct 11, 2011Closed Jun 11, 2012Recall 12V166000
  In a January 10, 2012 letter to NHTSA, BMW of North America, LLC. (BMW) submitted a Defect Information Report (DIR) identifying a defect in the electric auxiliary water pump in approximately 88,911 model year (MY) 2007-2011 Mini Cooper vehicles manufactured from November 14, 2006 through January 18, 2011 (Recall…

  In a January 10, 2012 letter to NHTSA, BMW of North America, LLC. (BMW) submitted a Defect Information Report (DIR) identifying a defect in the electric auxiliary water pump in approximately 88,911 model year (MY) 2007-2011 Mini Cooper vehicles manufactured from November 14, 2006 through January 18, 2011 (Recall 12V-008).According to BMW, the auxiliary water pump on vehicles equipped with 4-cylinder turbocharged engines may overheat.Electro-migration can cause the pump electronic circuit board to overheat resulting in smoldering of the water pump. If smoldering occurs, it may lead to an engine compartment or vehicle fire.The pump supplier, Pierburg Pump Technology GmbH, redesigned the pump to address factors that may contribute to circuit board overheating.The redesigned pumps were completely implemented in production vehicles by January 2011.Recall 12V-008 was the third recall initiated by BMW to address electric auxiliary water pump fires in vehicles equipped with Pierburg pumps.In two October 20, 2011 letters to NHTSA, BMW submitted DIRs for similar auxiliary water pump defect conditions in approximately 32,084 MY 2008-2011 BMW 5-Series, 7-Series, X5 and X6 models equipped with 8- and 12-cylinder engines and manufactured from May 2008 through December 2010 (Recall 11V-521); and for approximately 589 MY 2010 Rolls-Royce Ghost vehicles manufactured from September 2009 through September 2010 (Recall 11V-522).In three separate April 5, 2012 letters to NHTSA, BMW submitted amendments to Recalls 11V-521, 11V-522 and 12V-008.The amendments all described a common defect condition related to a manufacturing process deviation in a certain production range of the redesigned Pierburg water pumps that could result in cracks in the pump housing, which may allow coolant to enter and contact the pump?s circuit board.BMW indicated that further analysis identified a specific machine process error at the sub-supplier that manufactures the water pump housing.Pump housing cracks may cause the circuit board to overheat and lead to smoldering of the water pump.Recall 12V-008 was, thus, amended to include approximately 1,457 MY 2011 Mini Cooper vehicles manufactured from March 31, 2011 through April 22, 2011, when pumps manufactured with the suspect manufacturing process may have been used in vehicle assembly.The amendment to Recall 11V-521 was assigned a new recall number, Recall 12V-161, and covered approximately 2,846 MY 2011-2012 BMW 5-Series, 6-Series, 7-Series, X5, and X6 vehicles manufactured from April 1, 2011 through August 1, 2011.The amendment to Recall 11V-522 was assigned a new recall number, Recall 12V-166, and covered approximately 69 MY 2011 Rolls-Royce Ghost vehicles manufactured from April 7, 2011 through June 2, 2011.The Office of Defects Investigation (ODI) analyzed complaint data provided by BMW as well as complaints submitted to ODI from consumers. In total, there were 30 unique Mini Cooper reports indicating engine fire.In addition, BMW provided warranty data showing 493 claims for replacement of the subject component on Mini Cooper vehicles.Owners of the recalled vehicles are notified to take their vehicle to a BMW dealer, who will replace the auxiliary water pump to prevent any incidents related to this issue.This preliminary evaluation is closed.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers (ODI Nos.):10286597, 10286663, 10289793, 10310677, 10314796, 10342365, 10394808, 10394192, 10403982, 10418325, 10422646, 10429003.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10244507MINI electrical systems have continued to develop over the past few years. As a result, the demand on the batteries has increased. Breakdowns due to an empty battery or problems in the vehicles electrical system can have various causes, most of which are not due to the battery itself. For this reason, a battery replacement will permanently eliminate the problem only in the rarest of cases. The energy diagnosis test module helps to localize these causes. This document covers important information for the dealer on how to handle discharged battery complaints. Without performing the energy diagnosis test plan, the root cause of a discharged battery cannot be identified. In order to properly repair the vehicle the first time, it is very important that the diagnostic test plan is performed to completion; with all results taken into consideration.
• 10206696New RDC wheel electronics will be introduced with future generation MINI models. The new wheel electronics are identified as Huf Generation 5. These new wheel electronics will need to be programmed using the new tool when replaced or when depressurized (0 psi) for more than 2 minutes.
• 10193497MINI Water Pump Class Action Settlement
• 10179827OC3 SEAT OCCUPANCY MAT - LIMITED WARRANTY EXTENSION TO 10 YEARS/120,000 MILES: Component-Specific Limited Warranty Extension For the above-referenced vehicles, MINI USA, a division of BMW of North America, LLC (MINI USA) is extending the limited warranty for the front passenger's OC3 seat occupancy mat (shown) to: 10 years/120,000 miles as determined by the vehicle's original in-service date.
• 10171506CLASS ACTION SETTLEMENT: N14 HIGH-PRESSURE FUEL PUMP (HDP) SERVICE BENEFIT CLASS VEHICLES: The MINI vehicle may experience a sudden engine operational failure reduced or loss of power while driving and the malfunction indicator lamp (MIL) may be illuminated along with high-pressure fuel pumprelated faults stored in the Engine Control Module (DME). PROCEDURE Perform the corresponding diagnosis/vehicle test and run the test plans to completion as applicable.
• 10162461Air Conditioning System Leak Testing. The customer complains of poor or no air conditioning cooling. After further diagnosis, the system is found to be low or empty of a refrigerant charge, but when using an electronic leak detector, no leak can be found. CAUSE: In most cases, an electronic leak detector is not sufficient for identifying small leaks in the system. Electronic leak detectors can give false alarms and can lead to an improper diagnosis of small leaks. A leak cannot be located exactly if accessibility is impaired (in the case of the expansion valve, evaporator or condenser).
• 10162460Service Action: Checking or Replacing the Door Sill Trim Strips. The door sill trim strips are deformed and/or peeling up at the corners. CAUSE: Insufficient surface preparation of the door sill.
• 10162441"Cooper S with N14: Diagnosis for Misfire Faults. The Service Engine Soon (MIL) lamp is illuminated and/or the customer complains that the engine runs rough (engine cold or warm) with any of the following misfire faults stored in the DME: * 2771, 2772, 2773, 2775, 2776, 2777, 2779, 277A, 277B, 277D, 277E, 277F - "Combustion misfire, cylinder 1..4", sometimes together with: * 2781, 2782, 2783 - "Combustion misfire, multiple cylinders." On rare occasions, the Service Engine Soon lamp may not be illuminated (with misfire faults still stored in the DME) when the vehicle is brought to the workshop. Multiple causes related to electrical and mechanical engine components, or poor fuel quality in combination with unfavorable driving behavior (low loads and short driving distances). This condition may lead to possible clogging of the injector tips, causing a disturbance of the fuel spraying pattern or excessive carbon deposits on the intake valves/ports, resulting in reduced air flow into the combustion chambers."
• 10153778OC3 seat occupancy mat: limited warranty extension to 10 years/120.
• 10152680"MANUAL TRANSMISSION - STIFF DIAGONAL GEARSHIFT LEVER MOVEMENT. The customer may complain of a ""stiff diagonal shift"" (e.g., N-R, R-N, 2-3/3-2 or 4-5/5-4). Also, in some cases, gears cannot be selected, or the selector gear does not go into the neutral position. CAUSE 1. The deflection lever circlip of the gearshift mechanism is damaged or missing. 2. Possible corrosion at the gearshift mechanism (shift cables or transmission gearshift unit)"
• 10152360"The Service Engine Soon (MIL) lamp is illuminated and/or the customer complains that the engine runs rough (engine cold or warm) with any of the following misfire faults stored in the DME: * 2771, 2772, 2773, 2775, 2776, 2777, 2779, 277A, 277B, 277D, 277E, 277F - ""Combustion misfire, cylinder 1..4"", sometimes together with: * 2781, 2782, 2783 - ""Combustion misfire, multiple cylinders"" On rare occasions, the Service Engine Soon lamp may not be illuminated (with misfire faults still stored in the DME) when the vehicle is brought to the workshop. Multiple causes related to electrical and mechanical engine components, or poor fuel quality in combination with unfavorable driving behavior (low loads and short driving distances). This condition may lead to possible clogging of the injector tips, causing a disturbance of the fuel spraying pattern or excessive carbon deposits on the intake valves/ports, resulting in reduced air flow into the combustion chambers."
• 10151349Bluetooth Connection Failures This Service Information bulletin supersedes SI M84 01 14 dated February 2016.. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware
• 10151347Delay in Automatic Driving Light Switching on/off. When driving out of a tunnel or exiting underground parking, the automatic driving light remains switched on for two minutes. Shut-off period varies based on detected situation. This is normal operational behavior.
• 10151060This Service Information bulletin supersedes SI M84 01 14 dated November 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: z Apple iPhones z Samsung S6 and the S6 Edge. Connectivity failure examples are: z Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. z Contact List incomplete z General connection failures z Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) z Samsung S6 and S6 Edge device firmware
• 10150985?OC3 SEAT OCCUPANCY MAT: LIMITED WARRANTY EXTENSION TO 10 YEARS/120,000 MILES. This Service Information bulletin supersedes SI 01 11 16 dated December 2016.
• 10150399"Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated."
• 10150396"Cooper S with N14: Diagnosis for Misfire Faults. The Service Engine Soon (MIL) lamp is illuminated and/or the customer complains that the engine runs rough (engine cold or warm) with any of the following misfire faults stored in the DME: ??2771, 2772, 2773, 2775, 2776, 2777, 2779, 277A, 277B, 277D, 277E, 277F - ""Combustion misfire, cylinder 1..4"", sometimes together with: ??2781, 2782, 2783 - ""Combustion misfire, multiple cylinders"" On rare occasions, the Service Engine Soon lamp may not be illuminated (with misfire faults still stored in the DME) when the vehicle is brought to the workshop. Multiple causes related to electrical and mechanical engine components, or poor fuel quality in combination with unfavorable driving behavior (low loads and short driving distances). This condition may lead to possible clogging of the injector tips, causing a disturbance of the fuel spraying pattern or excessive carbon deposits on the intake valves/ports, resulting in reduced air flow into the combustion chambers."
• 10150356"Discharged Battery: Energy Diagnosis Must Be Performed. MINI electrical systems and advancements in vehicle technology have resulted in an increased demand on the vehicle battery. This SI will help the dealer handle ""discharged battery"" complaints. A discharged battery can have various causes, most unrelated to the battery. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to http://www.batteryuniversity.com/parttwo-42B.htm. For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. To properly repair the vehicle the first time in the workshop, the diagnostic test plans must be performed to completion, with all results taken into consideration. The procedure below will guide the technician to properly repairing the vehicle and getting paid for a warranty claim. CAUSE Discharged battery."
• 10150352"Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated."
• 10150351"Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated."
• 10150347During Engine Oil Service a Small O-Ring Is Found in the Oil Filter Housing. No customer complaint has been received. During the scheduled engine oil service, the technician notices a black rubber o-ring lying on the bottom of the engine oil filter housing. The o-ring has been dislodged from the non-return valve inside the engine oil filter housing. No subsequent engine damage occurs from the dislodged o-ring. Engine oil filter housing (1) Rubber o-ring (2) The material dimensions of the rubber o-ring are not satisfactory, allowing it to become dislodged from its installation location.
• 10150309Squeaking Noise from Front Seat. A noise may be heard from the front driver's seat back when the customer applies sideways pressure during cornering. CAUSE Surface corrosion on the metal seat back frame can make a squeaking noise when rubbing against the foam rubber padding of the seat back.
• 10150308Bonnet Lock Difficult to Open or Close. The bonnet lock fails to operate correctly and is difficult to open or close. CAUSE Corrosion in the bonnet lock assembly
• 10150306"Erroneous ""Service due"" Message Though Brake Lining Thickness Sufficient. The CBS data calculated for the remaining distance of the front and/or rear brake pads does not agree with the actual brake pad thickness. The yellow brake lining service due indicator illuminates even though the pad thickness is greater than the minimum wear limit (approximately 3.7 mm); the brake wear sensor has not yet been activated (from a thickness of approx. 4.2 mm). In some cases, the red warning message may already be active. The CBS front/rear brake display is based on a mathematical calculation. Various influences are incorporated into this calculation (for example, vehicle speed, brake pressure, and rotor temperature). Due to changing driving characteristics and/or unfavorable environmental conditions, the calculated remaining distance may differ from actual pad thickness."
• 10150305Adjusting Rear Camber. Rear camber cannot be adjusted properly. CAUSE Repair instructions not followed properly
• 10150303Service Action: N14 Engine Retrofit Turbocharger Engine Oil Supply Line Heat Shield. After switching off the engine, the heat radiating from the turbocharger may cause the engine oil to solidify in the oil supply line to the turbocharger. This can lead to a restriction in the oil supply line, resulting in damage to the turbocharger bearings. CAUSE Close proximity of the turbocharger engine oil supply line and the turbocharger
• 10150269Intermittent Humming or Buzzing Noise from Speedometer. When the vehicle is decelerating, an intermittent humming or buzzing noise coming from the instrument cluster may be heard when the speedometer needle is between 0 and 12 mph. Hardware error in the instrument cluster
• 10150241Incorrect Customer Relations Telephone Number Is Saved in the Vehicle. The customer is not connected to MINI Customer Relations after dialing the number displayed in the vehicle Kombi or radio. CAUSE During the Pre-Delivery Inspection (PDI), the incorrect telephone number is being written into the vehicle. INFORMATION 1. When performing the PDI test plan, it is extremely important that you select MINI if the ISID is configured for both BMW and MINI. 2. After completion of the PDI test plan, verify that the customer relations number stored in the vehicle is correct. 3. The correct customer relations phone number is 1(866) 275-6464. 4. If the number stored in the vehicle is incorrect and the correct test plan was used, contact your 3g Administrator and have him or her verify the number stored in the ISID. 5.This picture shows the correct number stored in the Combox control unit. Note: To read out telephone number:
• 10150238"N14 and N18 Engine: High-pressure Pump Repair Instruction. INFORMATION The current version of ISTA/D Repair Instruction 13 51 017, ""Removing and installing or replacing high-pressure pump (N14, N18)"" has a procedure error. The current version of the Repair Instruction states to replace the highpressure supply hose on the N14 engine. The Repair Instruction also states not to replace the high-pressure supply hose on the N18 engine. The N18 portion of the Repair Instruction is incorrect. As an interim solution, follow the procedure outlined below until this portion of the Repair Instruction is corrected. https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15601.2.M130113... 8/30/2013 Page 2 of 2 All vehicles equipped with the N18 engine and produced from 3/2012 and later. When the engine is fitted with a Bosch High-pressure Pump (1) the highpressure supply hose (2) MUST NOT be replaced when making repairs. The remaining portion of the Repair Instruction and tightning torques are correct. Refer to EPC for the applicable part numbers when making repairs. "
• 10150237?N18 Engine: FC 2BF2 Rail Pressure Sensor Is Stored in DME Fault Memory. The customer states that the Service Engine Soon lamp is illuminated and the following fault is stored in the DME: FC 2BF2 Rail pressure sensor, workspace: pressure too high CAUSE A DME calibration error in the fuel pressure diagnostics results in an increased sensitivity.
• 10150207"Service Action: Convertible Top Does Not Close. During the closing process, it is possible that the convertible top locating pin on the right side is not correctly positioned in the landing plate at the top of the A-pillar (passenger's side). AFFECTED VEHICLES This Service Action affects certain R57 vehicles produced from July 2013 to October 2013. 3.This picture shows the left side locating pin correctly positioned in the landing plate on the driver's side A-pillar. 4.The passenger's side should In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar label for code number 63. If code number 63 has been punched out, the campaign has already been performed. If code number 63 has not been punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the response of the system, either proceed with the corrective action or take no further action. Important Note: A Campaign can be reserved in ISPA Light as "Pending" prior to submission of a claim. If you find this Campaign reserved, please verify the reason before attempting to perform this repair."
• 10150205"?SI M34 01 13 November 2013 BrakesTechnical Service This Service Information bulletin supersedes SI 34 01 13 dated October 2013. designates changes to this revision SUBJECT Erroneous ""Service due"" Message Though Brake Lining Thickness Sufficient. The CBS data calculated for the remaining distance of the front and/or rear brake pads does not agree with the actual brake pad thickness. The yellow brake lining service due indicator illuminates even though the pad thickness is greater than the minimum wear limit (approximately 3.7 mm); the brake wear sensor has not yet been activated (from a thickness of approx. 4.2 mm). In some cases, the red warning message may already be active. The CBS front/rear brake display is based on a mathematical calculation. Various influences are incorporated into this calculation (for example, vehicle speed, brake pressure, and rotor temperature). Due to changing driving characteristics and/or unfavorable environmental conditions, the calculated remaining distance may differ from actual pad thickness."
• 10150203N16 Engine: FC 2D9B Knock Sensor, Signal Is Stored in the DME. Certain areas of the US experience extremely cold climate conditions during the winter months, which can cause the Service Engine Soon lamp to illuminate while the engine temperature is increasing to full operating temperature. The following fault may be stored in the DME: ??FC 2D9B Knock Sensor, Signal CAUSE Unfavorable DME knock sensor diagnostic at outside ambient temperatures below -5 C
• 10150202Service Action: N14 Engine Check Timing Chain Tensioner and Timing Chain. The timing chain tensioner applies pre-tension to the timing chain guide rail mechanism. In some cases, the tensioner spring force may be too low. Depending on the severity of the wear, it may lead to a rattling noise when starting the engine cold or when the engine is idling. CAUSE The timing chain tensioner internal tolerances are not consistent.
• 10150198This is an update to the Delivery Stop that was issued on certain 2014 model year MINI Cooper, Cooper S and John Cooper Works Convertibles produced between July and October 2013. During closing, it is possible that the convertible top locating pin is not correctly positioned in the landing plate, at the top of the A-pillar (passenger?s side). The repair procedure is pending the release of warranty information which is expected shortly. Dealers will be updated via DCS as soon as this occurs. Affected vehicles in dealer inventory must not be delivered until the Service Action has been completed. A chassis number list of affected vehicles can be found as an attachment to this message.
• 10150190This is an update to the Delivery Stop that was issued on certain 2014 model year MINI Cooper, Cooper S and John Cooper Works Convertibles produced between July and October 2013. During closing, it is possible that the convertible top locating pin is not correctly positioned in the landing plate at the top of the A-pillar (passenger?s side). The repair procedure is now available in Service Information bulletin M54 05 13. Affected vehicles in dealer inventory must not be delivered until the Service Action has been completed. A chassis number list of affected vehicles can be found as an attachment to this message. This list must be used to identify affected vehicles until they are available via the Key Reader, ISPA or DCS Inquiry.
• 10150148Basic SVS: Voice Recognition Inoperative After Programming. After programming the vehicle with ISTA/P 2.48.x, the voice recognition (Basic SVS) is inoperative. NOTE: The Basic SVS only includes voice recognition for phone functions. Error in the coding data of ISTA/P 2.48.x The voice recognition function is unintentionally deactivated.
• 10150147"CHAMP2: Stored Radio Stations Deleted After Ignition Off. After ignition off, the stored radio stations (AM/FM and Satellite radio) are no longer available in: * Menu ""PRESETS"" * Preset buttons on the head unit Hardware error in the CHAMP2 head unit"
• 10150145Clutch Is Slipping or Grabbing. The customer states that the clutch is slipping or grabbing.
• 10150090"HAMP2: Stored Radio Stations Deleted After Ignition Off. After ignition off, the stored radio stations (AM/FM and Satellite radio) are no longer available in: * Menu ""PRESETS"" * Preset buttons on the head unit Hardware error in the CHAMP2 head unit"

Every MINI Cooper S Convertible model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.