1991 Nissan 240SX
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Nissan › 240SX › 1991
These records cover every 1991 Nissan 240SX. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 1991 Nissan 240SX. Newest first.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
Risk and remedy
Risk
The safety belts would not provide adequate protection to an occupant in a vehicle crash.
Remedy
Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch IS securely locked, and then pressing the release button. The latch plate should pop out of the buckle when the button IS pressed. If either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired free of charge.
Owner complaints
9 complaints
What owners report most
Latest complaints
- Seat belts
TL* the contact owns 1991 nissan 240 sx. The contact stated that the seat belt was inoperable. He contacted a local dealer and the manufacturer and they both diagnosed that the control module would need to be replaced. The vehicle was not repaired. The failure and current mileage was 190,000.
- Engine and engine cooling › Exhaust system
On cold start-up, black smoke emitted from the exhaust. *Jb
- Seat belts › Front › Buckle assembly
The lap belt unbuckles when pressure IS applied such as hard braking where there IS stress placed on the coupling. *Mjs
- Fuel system, gasoline › Fuel injection system › Injectors
Need all injectors to be replaced...was informed that leaky injectors may cause fire. *ak
- Power train › Automatic transmission
The automatic transmission unexpectedly stopped working while I was driving the vehicle. no accidents or injuries resulted, but this could easily have occurred under different circmstances. when I brought the vehicle to a knowledgeable transmission repair shop, the chief mechanic informed me that…
The automatic transmission unexpectedly stopped working while I was driving the vehicle. no accidents or injuries resulted, but this could easily have occurred under different circmstances. when I brought the vehicle to a knowledgeable transmission repair shop, the chief mechanic informed me that there IS a known design flaw in this transmission. in fact, he had rebuilt many of these and knew how to "modify" the unit to prevent further problems. my question: doesn't the manufacturer have some responsibility here? I am in the process of contacting nissan and will await their formal response. in the meantime, can you help me get this problem resolved? I am convinced there are many more consumers out there driving these vehicles who are at risk. *ak
- Power train › Automatic transmission
Transmission was washed and now transmission will not shift out of 1ST. vehicle has sat for over a week and still will not shift out of low when it IS in drive.
- Seat belts › Front › Retractor
Both seat belts in the front will not retract. Upon putting the belt on the belt, it will not retract around the front passenger or driver. *ak
- Seat belts
The automatic shoulder belt on the driver's side does not go back and forth. *ak
- Engine and engine cooling › Engine
Warped flywheel caused release bearings/clutch to fail prematurely. *Dsh
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Fuel leaks from fuel injectors
In October of 1995, Nisan conducted a safety improvement campaign, 95I-006.The campaign recalled Maximas (1985-88), 200SX (1987-88), 300ZX (1984-88, and Infinity M30 (1990-92), for fuel leaking from the fuel injectors.The remedy called for a replacement of the fuel injectors and related hoses on the affected…
In October of 1995, Nisan conducted a safety improvement campaign, 95I-006.The campaign recalled Maximas (1985-88), 200SX (1987-88), 300ZX (1984-88, and Infinity M30 (1990-92), for fuel leaking from the fuel injectors.The remedy called for a replacement of the fuel injectors and related hoses on the affected vehicles.The recall was influenced by EA94-018, involving over 680,000 1984-89 Maxima and 300ZX vehicles, and was originally initiated as PE94-018 with 25 complaints, for a complaint rate of 4 per 100K.ODI has received 34 complaints for the 1990-92 Stanzas and 240SXs, for fuel leaking in the engine compartment from the fuel injectors, for a complaint rate of 10 per 100K.Fuel in the presence of an ignition source can lead to a vehicle fire.The purpose of this investigation is to evaluate whether the 1990-92 Stanzas and 240SXs should be recalled.
- Takata seat belt buckle failure
There is no summary currently available
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
- 1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
- 10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
- 10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192305SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
- 10192233Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletinfor further detail.
- 10192217If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see NTB00-033). See this bulletin for further detail.
- 10192216SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake incident based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific incident. See this bulletin for further details.
- 10192145SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
- 10188377STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10051767Nissan: lock/unlock request button on outside handle does not respond.
- 10032506Nissan: vent control valve replacement. When replacing the evap canister vent control valve for reason: use the one listed on page 2; for vent control valve replacement procedure, refer to the appropriate section of the electronic service manuals (esm; when installing the new valve, do not add any lube to its o ring; for frontier (D40 series) only, install the protector listed in parts information. Includes 2005-09 frontier. Updated 12/8/10.
- 10031305Nissan: tire pressure monitoring system (TPMS) warning light on/flashing. No models or model years listed. Updated on 08-11-2011.
- 10030165Nissan: the 12 volt battery IS an important part of the vehicle electrical system and IS required to stay connected when the engine IS running. To prevent damage to vehicle electronic components follow the instructions/cautions. No model years listed.
- 10017473Front seat belt latch plate retaining button missing.
- 10003515Front seat belt latch plate retaining button missing.
- 629210Seat belt latch plate retaining button missing.
- 607626Concerns with the front seat belt latch plate stopper button missing.
Every Nissan 240SX model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.