2016 Pierce Ladder And Platform
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Pierce › Ladder And Platform › 2016
These records cover every 2016 Pierce Ladder And Platform. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2016 Pierce Ladder And Platform. Newest first.
Pierce Manufacturing (Pierce) is recalling certain 2016-2022 Ascendant 107' Aerials and 110' Platforms mounted on single rear axle Enforcer chassis. The galvanized stabilizer beams may develop cracks.
Risk and remedy
Risk
Cracks can cause instability when an aerial ladder or platform is elevated, increasing the risk of injury.
Remedy
Dealers will inspect and replace the galvanized stabilizer beams as necessary, free of charge. Owner notification letters were mailed June 14, 2023. Owners may contact Pierce customer service at 1-888-974-3723.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011818This bulletin is to support the dealer network when replacing a ASL 360 ECU that requires programming on the truck.
- 11011817Software update for fault codes on Command Zone display: This software update may help remove ambiguity between active and inactive engine error codes shown on the Command Zone display.
- 11011816This is a procedure outlining the steps required to retro fit a fire apparatus that currently has a CZI HED, CZI Morey, or a CZII Morey display to the current production product HED Color display. This process outlines all potential environments in which this is possible.
- 11008390The purpose of this bulletin is to educate the user on the installation of the Under Basket Sensor System: This system uses an ultrasonic distance sensor installed on the underside of the basket. It is an operator aid and will automatically reduce the basket speed as it approaches the ground and will stop the basket when it reaches a height of 8 above the ground.
- 11008388This product enhancement for the new top rear body crossmember and rear catwalks for the 100 AAT allows for easier access to the torque box mounting bolts that require quarterly inspections.
- 11008386All Roto Rays are warranted to the purchaser for twenty-four months from the date of service against defects in material or workmanship. During the warranty period products found to be defective will be repaired or replaced (at Roto Rays option) without charge. The defective light must be returned to Roto Rays, INC., 722 Park Ave., Herndon, VA 20170. The light will be returned to the purchaser prepaid.
- 11004152Identification of loose torque box to frame bolts during 3rd Party Inspections and/or preventive maintenance intervals.
- 10248700Detroit recently released an ACM software update v7.61.2.0 to address high occurrences of Selective Catalyst Reduction Closed Loop Control at Maximum Limit faults on Pierce apparatus with MY2016 2022 Detroit engines. The updated software includes improvements for three fault codes.
- 10238848Two replacements parts are not a perfect fit and will require technicians to trim the new part to fit. Use discretion to trim the soft rubber material to conform.
- 10237496Proper application of ladder rung covers with adhesives to ensure binding to ladder rungs.
Every Pierce Ladder And Platform model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.