1997 Plymouth Prowler
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Plymouth › Prowler › 1997
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1997 Plymouth Prowler. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
5 recalls name the 1997 Plymouth Prowler. Newest first.
Certain tigas fuel pump modules manufactured between june 1 and september 24, 2006, sold under various brand names and p/nos. these fuel pump modules are sold as aftermarket for use in certain daimlerchrysler vehicles listed above. silicone material used in manufacture of the flapper valve was out-of-specification, leading to excess swell of the flapper…
Fuel restriction could result in loss of power and/or engine stall, possibly resulting in a vehicle crash.
Ti automotive will notify owners and replace the defective fuel pump modules free of charge. the recall began on october 6, 2006. owners may contact ti automotive toll-free at 1-877-461-1834.
Certain aftermarket brake hydraulic master cylinders sold as replacement brake cylinders for certain ford, daimlerchrysler, and jeep passenger vehicles. these brake cylinders were sold under the brand names of napa, raybestos, aimco, ac delco, carquest, bendix, and wagner. only products that were manufactured from july 27, 2005 through january 17, 2006…
Loss of brake fluid can lead to a decrease in brake line pressure and an increase in stopping distance, which can result in a vehicle crash.
Affinia (brake parts, inc.) will replace the subject brake hydraulic master cylinders free of charge. the recall began on march 20, 2006. owners can contact affina group customer service at 1-800-323-0354.
On certain passenger vehicles, the lower control arm ball joints may experience a loss of lubrication that can result in accelerated wear and possible separation from the steering knuckle.
A ball joint that has separated may result in loss of directional control.
Dealers will replace the front lower control arm ball joints with modified assemblies. owner notification began on april 4, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-853-1403 or check on-line at http://www.chrysler.com/webselfservice/chrysler/index.jsp
Vehicle description: passenger vehicles built with 3.5L engines. the fuel injection delivery system can leak fuel from some of the sealing o-rings or from hair line cracks in the thermoset fuel injection rail.
Fuel leakage in the presence of an ignition source can result in a fire.
Dealers will replace the fuel rail o-rings and reinforce the outlet (passenger) side fuel rail. vehicles showing fuel leakage on the outlet fuel rail must have the outlet rail replaced which includes changing the upper and lower injector o-rings. however, if a vehicle IS leaking fuel from the o-rings or from a cracked fuel line, the vehicle should be taken into a dealer to have this repaired as soon as possible.
Vehicle description: multi-purpose passenger vehicle. some of the frame welds that affect vehicle control and crashworthiness were omitted in six zones in the frame.
Loss of vehicle control can occur, increasing the risk of a vehicle crash.
Dealers will inspect these vehicles for the presence of the critical welds. any vehicles missing welds will be corrected by teams of welders in the field.
When driving and upon hitting a bump in the road/surface or driving on rough road surface, hood latch will become unlatched, causing the hood to fly up due to the switch which became activated. Consumer has contacted the dealer., said that there was nothing wrong with the switch. *ak *ML
Recall # 98v184000 chrysler/fuel injection leakage; dealer does not have parts to correct recall. Parts are on back order. Owner has contacted dealer twice and chrysler customer service department once. *ak
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
Odi has received complaints that the subject vehicles have had one or both of their lower ball joints separate and cause the front of the vehicle to drop to the ground.daimler chrysler?s assessment of the ball joint failures IS that the joint failure may be precipitated by the loss of joint lubrication.the loss of lubrication could result in accelerated wear and possible joint separation. Daimler chrysler believes that the loss of joint lubrication IS the result of leaks or tears in the rubber boot that protects the ball joint.these leaks or tears could be caused by contact with other internal parts of the ball joint or torsional loading that twists the boot.by letter dated february 4, 2003, the manufacturer advised this agency of its decision to initiate a safety recall campaign for all of the 11,698 subject vehicles built from january, 1997 to march, 2001 to correct the defect identified in this ea (copy attached).the action IS identified by nhtsa as recall no. 03V-034.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.