2005 Porsche 911 Turbo
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Porsche › 911 Turbo › 2005
These records cover every 2005 Porsche 911 Turbo. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2005 Porsche 911 Turbo. Newest first.
Ohlins USA, Inc (Ohlins) is recalling certain Front Struts, part number POS 5N20. These struts were sold as part of Ohlins strut kits part number POZ MN02, intended for installation on 1999-2005 Porsche 911 Carrera 4 and 4S (generation 996), and 2001-2006 Porsche 911 Turbo / Turbo S (generation 996) and kit part number POZ MN05, intended for installation…
Risk and remedy
Risk
If the pin fails, it will cause separation of the strut from the vehicle, affecting vehicle control and increasing the risk of a crash.
Remedy
Ohlins will notify owners, and dealers will request the return of all unsold kits containing the subject part from dealer/distributor inventory for a full refund. All owners who purchased one of the kits (POZ MN02 or POZ MN05) will receive replacement front struts (POS 5N20 or POS 5N21 - These parts are interchangeable), along with new top mount interface solutions, free of charge. The recall began December 22, 2020. Owners may contact Ohlins customer service at 1-800-336-9029.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Rapid coolant loss
On April 26, 2013, the Office of Defects Investigation (ODI) opened PE13-009 to investigate 10 complaints alleging incidents of sudden coolant loss while traveling on public roadways in certain model year (MY) 2001 through 2007 Porsche 911 vehicles.The complaints alleged that pipe ends joined by epoxy to certain…
On April 26, 2013, the Office of Defects Investigation (ODI) opened PE13-009 to investigate 10 complaints alleging incidents of sudden coolant loss while traveling on public roadways in certain model year (MY) 2001 through 2007 Porsche 911 vehicles.The complaints alleged that pipe ends joined by epoxy to certain cooling system components may fail suddenly and separate, resulting in large volumes of coolant leakage.The investigation was opened to assess evidence of a design or manufacturing defect in the coolant pipe fittings and any related safety consequences. In response to ODI?s Information Request letter, Porsche identified a manufacturing quality issue with the supplier?s application of adhesive to coolant pipe fittings that resulted in elevated failure rates in approximately 6,800 early production 997 generation vehicles (MY 2007 and early MY 2008).ODI?s analysis of field data showed that the age-adjusted failure rate for these vehicles was approximately six times greater than MY 2001 through 2005 996 generation vehicles and MY 2008 through 2011 997 generation vehicles built after a process improvement for adhesive application was implemented by the supplier.Most of the leak complaints reviewed by ODI did not appear to involve complete separation of the fittings and many were detected when the vehicle was parked.There were no crashes or injuries reported to be related to the alleged defect in any of the subject vehicles.ODI identified two allegations that coolant leakage resulted in loss of control incidents, but neither involved vehicles affected by the assembly process quality issue.A third loss of control allegation involving a vehicle built during the period affected by the supplier process concern is not counted since ODI was unable to contact the owner to confirm the incident.See the full closing resume in the document file for PE13-009 for additional information about the subject cooling system and ODI?s analysis of field data related to the alleged defect. A safety-related defect has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor this issue and reserves the right to take further action if warranted by the circumstances.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011666Parts information with parts withdrawal involving the hydro-mounting - 992199384F The affected vehicles are cars that use the part number mentioned.
- 11011572Parts information for parts withdrawal involving the oil separator. The affected vehicles are cars that use part number 0PC115099A
- 11011570Special tools and equipment information for the WiScope UV upgrade - affecting all Porsche models
- 11011563Information on PIWIS tester update 43.000.020 & .021. PIWIS tester updates applies to all Porsche models that have an OBD2 port.
- 11011561Information on PIWIS tester update 43.000.017. PIWIS tester updates applies to all Porsche models that have an OBD2 port.
- 11011552Parts information for parts withdrawal involving the camera and control unit with the camera - PAD980551 & PAD980568C. The affected vehicles are cars that use the part numbers mentioned.
- 11011200Information on PIWIS tester update 43.000.016. PIWIS tester updates applies to all Porsche models with an OBD2 port.
- 11011195Information on PIWIS tester update 43.000.010, .011 & .015. PIWIS tester updates applies to all Porsche models with an OBD2 port.
- 11011158Installation and conversion instructions on the manthey threaded suspension for the 911.
- 11009877Information on PIWIS tester update 42.950.048
- 11009862Special tools and equipment information for the mobile data signal strength in the workshop
- 11008666Manufacturers certificate with an overview on approved Porsche A40 engine oils. See attached for list of affected vehicles.
- 11008661Manufacturers certificate with an overview on approved Porsche C30 engine oils. See attached for list of affected vehicles. All MY04-20
- 11008658Parts information for parts withdrawal involving the windscreen. Vehicles affected are cars that use part numbers 992845011Q, 992845011AN, 992845011S, 992845011AM, 992845011BL, 992845011DB, 992845047DY, 992845047FY
- 11008657Information on PIWIS tester update 42.950.040. PIWIS tester updates applies to all Porsche models that have an OBD2 port.
- 11008637Information on PIWIS tester update 42.950.032. PIWIS tester updates applies to all Porsche models that have an OBD2 port.
- 11008636Information on PIWIS tester update 42.950.030. PIWIS tester updates applies to all Porsche models that have an OBD2 port.
- 11008635Parts information for parts withdrawal involving the booster - 7PP035223M, 7PP035223AA, 99164548000. Vehicles affected are cars that use the part numbers listed.
- 11008624Information on PIWIS tester update 42.950.025
- 11008603Parts information for parts withdrawal involving the windscreen. The cars involved are cars that use the part numbers 992845011Q, 992845011AN, 992845011S, 992845011AM, 992845011BL, 992845011DB, 992845047DY, 992845047FY
- 11008486Information on PIWIS tester update 42.950.021
- 11008479Parts information for parts withdrawal involving the chain tensioner - 0PB109507D
- 11008476Information on PIWIS tester update 42.950.020
- 11008473Parts information for parts withdrawal involving the seat frame - 992885456CY
- 11008470Information on PIWIS tester update 42.950.015
- 11008454Parts information for parts withdrawal involving the booster - 7PP035223M, 7PP035223AA, and 99164548000
- 11008449Information on PIWIS tester update 42.950.010 & .011
- 11008441Parts information for parts withdrawal involving the engine oil (00004321093)
- 11008440Information on PIWIS tester update 42.950.000 & .001
- 11007107Parts information for parts withdrawal involving the wire set - 976971227 & 976971227A
- 11007096Information on PIWIS tester update 42.900.030
- 11007041Information on PIWIS tester update 42.900.020
- 11007037Parts information for parts withdrawal involving the ball screw - PAF004835
- 11007036Information on PIWIS tester update 42.900.010
- 11006874Parts information for parts withdrawal involving a number of parts for the flange, fuel pump, and fuel filter
- 11006858Product Knowledge on the chassis/VIN numbering systems
- 11006850Information on PIWIS tester update 42.900.000
- 11005806Parts information for parts withdrawal involving the charger for the high-voltage battery
- 11005805Information on PIWIS tester update 42.800.070 & .072
- 11005798Special tools and equipment information VAS6292 Hunter Aligner License Program Change
Every Porsche 911 Turbo model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.