2007 Prevost H3-41
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Prevost › H3-41 › 2007
These records cover every 2007 Prevost H3-41. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2007 Prevost H3-41. Newest first.
Prevost Car (US) Inc. (Prevost) is recalling certain Prevost buses. Please see the above list of models. The entrance door is missing the emergency exit operating instruction label. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 217, "Bus Emergency Exits and Window Retention and Release."
Risk and remedy
Risk
Missing instructions may prevent or delay passengers from evacuating the bus during an emergency, increasing the risk of injury.
Remedy
Prevost will replace the emergency exit label, free of charge. Owner notification letters are expected to be mailed December 7, 2026. Owners may contact Prevost's customer service at 1-866-870-2046. Prevost's number for this recall is SR26-19.
Prevost Car (US) Inc. (Prevost) is recalling certain 2005-2024 X3-45, 2017-2019 and 2021-2023 X3-45 Commuter, 2006-2007, 2014, and 2018 H3-41, 2005-2020 and 2022-2024 H3-45, and 2019 H3-45 VIP buses equipped with a wheelchair lift. The wheelchair platform bridging device may be too steep, which can cause the wheelchair to become unstable. As such, these…
Risk and remedy
Risk
An unstable wheelchair increases the risk of injury to lift occupants.
Remedy
Prevost will replace the wheelchair lift bridging device, free of charge. Owner letters were mailed April 25, 2025. Owners may contact Prevost customer service at 1-866-870-2046. Prevost's number for this recall is SR24-26.
Prevost Cars, Inc. (Prevost) is recalling certain model year 2007-2012 XLII, X3-45, H3-41, H3-45, and H3-45 VIP vehicles manufactured July 5, 2007, to May 11, 2012. The affected vehicles may be missing a fuel line locating clip, allowing the fuel line to rub against the braided coolant hose.
Risk and remedy
Risk
The fuel line rubbing may result in abrasion and a fuel leak, increasing the risk of a fire.
Remedy
Prevost will notify owners, and dealers will inspect the fuel line for abrasion, replacing it as necessary, and will properly secure the fuel line and coolant line, free of charge. The recall began on March 26, 2015. Owners may contact Prevost customer service at 1-418-883-3391. Prevost's number for this recall is SR15-04.
On certain motor coaches equipped with zf/arens astronic shift selectors, a cell phone placed in the proximity of the shifter touch pad could cause the display to change from 'r' (reverse) to 'd' (drive) should the phone receive a call.
Risk and remedy
Risk
This interference can cause the transmission to not operate or cause improper shifting, as forward gear can be engaged from neutral only, if the vehicle has been stopped, and if the brake pedal has been depressed. if the malfunction occurs while 'r' (reverse) IS being selected, the shifter may possibly change to 'd' (drive), increasing the risk of a crash.
Remedy
Prevost will mail stickers and installation instructions to their owners and will also arrange to have the transmission software upgraded. the recall began on february 13, 2008. owners may contact prevost at 1-418-831-5432.
On certain motor coaches equipped with bendix SR-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Risk and remedy
Risk
This could cause delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
Remedy
Prevost IS working with bendix to repair these vehicles (please see 07e037). bendix will install a check valve repair kit for the affected SR-7 spring brake modulating valve free of charge. the recall began on september 14, 2007. owners may contact bendix at 1-440-329-9000 or prevost at 1-418-831-2046.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11003159Sway bar collars improvement. Revision A : Add front sway bar support replacement and change bolts lenght.
- 10248275Sway bar collars improvement
- 10240148H3 lavatory fan retrofit kit
- 10228667Air Tanks Draining Sequence. Revision: B - General Update
- 10226928Air Tanks Draining Sequence. Revision: A - Erroneous Secondary & Accessory tanks location.
- 10226927Air Tanks Draining Sequence
- 10217314STORAGE AND STARTUP GUIDELINES : part number updates
- 10214935Central hvac merv filters installation
- 10201825Lavatory compartment sliding door latch improvement
- 10201006Sound Selector replacement, VSS04 to VSS05; When replacing a vehicle sound selector model VSS04 with a new sound selector model VSS05, an interface harness is required to connect the vehicle harness to the new sound selector model and a new VSS05 compatible radio unit must also be installed. This procedure describes the steps required to perform this update.
- 10199007STORAGE AND STARTUP GUIDELINES: Periodically, circumstances arise requiring operators to temporarily park a coach in storage. Whether it is a few weeks or several months, sporadic out of service times or a full stop, Prevost recommends following the guidelines in this document during times when: The coach can be operated on a regular/weekly basis while in storage. The coach will be in storage for an extended period without any operation. The coach will return to service following an extended period of downtime.
- 10199002Central hvac merv filters installation reva
- 10189728TIE ROD 610052 FIRST INSTALLATION INSTRUCTIONS: Use these instructions when replacing the drop joint tie rod on S82, S84 / S84U I-beam axles. The new tie rod will be adjusted to the length of the original; however, a steering alignment needs to be performed after replacement.
- 10188231Introducing a new engine coolant into prevost service center network
- 10186398Rev A: Mention added concerning DDC Series 60 engine SCA requirement
- 10184354Introducing a new engine coolant into service
- 10184353Revision : A Torque value reduced
- 10183368LAVATORY FAN RETROFIT KIT Applicable for H3 Series coaches from R-1012 (1994) Revision A: Added installation detail at step 8
- 10181758Fan clutch plate bolts re-torquing
- 10181753H3 drivers partition lite installation
- 10179434STORAGE AND STARTUP GUIDELINES Revision: B Parts added to Suggested Material 08-10-2020
- 10177808JERKY, NOISY OR HARD TO TURN STEERING GEARBOX. HYDRAULIC END LIMITER ADJUSTMENT. All models equipped with RB Bosch/ZF Servocom or Servocomtronic steering gearbox
- 10176965Plexiglass Shield Behind Driver H3 Series
- 10176961STORAGE AND STARTUP GUIDELINES: Rev A: 21516229 replaced by 23381562 20523393 replaced by 21454749 800383 removed 611471 replaced by 611360 70376808 replaced by 21036050 21396642 replaced by 20967831
- 10174680Prevost vehicle disinfection procedure
- 10174679Storage and startup guidelines - all prevost vehicles & volvo 9700
- 10173171Added: Power cables for L.H. side alternator & fan drive breaker box
- 10171979This instruction sheets explains how to replace the fuel tank on H-series vehicles. (Replacing older series tanks by newer model)
- 10165715This instruction sheet explains how to replace halogen fog light to led's
- 10164461This Maintenance Information explains how to install harness #7770134, designed to bypass the Engine Compartment Harness (Prevost part), connecting the DPF harness (10-pin connector) and the Engine Harness (31-pin connector).
- 10164156This Instruction Sheet explains how to perform the first installation of Tie Rod 610052 on Prevost vehicles equipped with Dana S82, S84 / S84U I-beam axles, 1994- today
- 10161732Vehicles identified below are compatible with a new tie rod design. This new tie rod 610052 has updated ball joints and a fine adjuster sleeve. It replaces former drop type ball joint tie rods. Refer to IS-18091 for installation instructions. This document details maintenance inspection and toe-in adjustment with the new design tie rod.
- 10161722This instruction sheet explains how to install the Tie Rod 610052.
- 10161720Message center display (mcd) replacement
- 10160854This instruction sheet explains how to install the Audio Converter 405842
- 10160846This instruction sheet explains how to relocate engine door gas spring.
- 10159388This instruction sheet explains how to relocate engine door gas spring.
- 10131546When replacing a vehicle sound selector model VSS04 with a new sound selector model VSS05, an interface harness is required to connect the vehicle harness to the new sound selector model and a new VSS05 compatible radio unit must also be installed. This procedure describes the steps required to perform this update.
- 10131543This Maintenance Information explains that polyester reinforced silicone hoses and elbowscan be repalced by aramid reinforced hoses and elbows for improved long term durability, and that constant torque hose clamps for silicone hoses with 5/8po, 3/4po, 7/8po, 1 1/8po and 1 3/8po inside diameter (I.D) can be replaced by new WAVE SEAL type constant torque hose clamps.
- 10131454On vehicles mentioned above, should the curbside electric sunshade fail to operate without encountering a drive mechanism issue, perform the following procedure.
Every Prevost H3-41 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.