2021 RAM Promaster City

Recalls

3 recalls name the 2021 RAM Promaster City. Newest first.

• Exterior lighting › Turn signal

  Sep 21, 2021NHTSA 21V72800023,853 vehicles

  Chrysler (FCA US, LLC) is recalling certain 2019-2021 Ram ProMaster City vehicles. If one or both turn signal lights fail, the flashing rate may not change to warn the driver of the failure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated…

  Risk and remedy

  Risk

  The driver may be unaware that the turn signals are not signaling their intentions to other drivers, which can increase the risk of a crash.

  Remedy

  Dealers will update the Body Controller Module (BCM) software, free of charge. Owner notification letters were mailed October 28, 2021. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is Y71.

  Full recall details →

• Seat belts

  Sep 9, 2021NHTSA 21V69900010,372 vehicles

  Chrysler (FCA US, LLC) is recalling certain 2021 Ram ProMaster City and Ram ProMaster vehicles. The seat belt automatic locking retractors may deactivate early, which can prevent the child restraint system from securing properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant…

  Risk and remedy

  Risk

  An unsecured child restraint system can increase the risk of injury during a crash.

  Remedy

  Dealers will inspect and replace the seat belt retractors as necessary, free of charge. Owner notification letters were mailed October 28, 2021. Owners may contact FCA US LLC customer service at 1-800-853- 1403. FCA US LLC's number for this recall is Y61.

  Full recall details →

• Service brakes, hydraulic › Antilock/traction control/electronic limited slip › Control unit/module

  Mar 9, 2021NHTSA 21V1470004 vehicles

  Chrysler (FCA US, LLC) is recalling certain 2020-2021 Ram ProMaster City vehicles. The Anti-Lock Brake System (ABS) module may have internal damage, which could result in a loss of braking performance or autonomous braking functions.

  Risk and remedy

  Risk

  The loss of braking performance or autonomous braking functions can increase the risk of a vehicle crash without prior warning.

  Remedy

  FCA US, LLC will notify owners, and dealers will replace the ABS module, free of charge. The recall began on March 30, 2021. Owners may contact FCA US, LLC customer service at 1-800-853-1403.

  Full recall details →

Owner complaints

What owners report most

1. Engine3
2. Equipment1
3. Exterior lighting1
4. Seat belts1

Latest complaints

• Dec 12, 2024PA
  Engine
  Cracked cylinder head requiring full engine replacement at ~80,000 miles. Out of warranty. This is one of two vehicles, purchased at the same time from same dealer in 6/2021 with the same engine failure at ~80,000. Second vehicle is [XXX] . It is likely that these two vehicles came off the…

  Cracked cylinder head requiring full engine replacement at ~80,000 miles. Out of warranty. This is one of two vehicles, purchased at the same time from same dealer in 6/2021 with the same engine failure at ~80,000. Second vehicle is [XXX] . It is likely that these two vehicles came off the assembly line fairly close to each other, during covid and all the issues that that brought to supply chains and manufacturing. One I could have chalked up to bad luck. Two is just too much of a coincidence to believe that there isn't something wrong with these engines. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Dec 12, 2024PA
  Engine
  Cracked cylinder head requiring full engine replacement at ~80,000 miles. Out of warranty. This is one of two vehicles, purchased at the same time from same dealer in 6/2021 with the same engine failure at ~80,000. Second vehicle is [XXX] . It is likely that these two vehicles came off the…

  Cracked cylinder head requiring full engine replacement at ~80,000 miles. Out of warranty. This is one of two vehicles, purchased at the same time from same dealer in 6/2021 with the same engine failure at ~80,000. Second vehicle is [XXX] . It is likely that these two vehicles came off the assembly line fairly close to each other, during covid and all the issues that that brought to supply chains and manufacturing. One I could have chalked up to bad luck. Two is just too much of a coincidence to believe that there isn't something wrong with these engines. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Apr 3, 2022PA
  Engine
  Engine oil leak at the oil filter. The oil filter monting surface has a defect (not flat) allowing oil to push out. It is currently available for inspection, but it is scheduled to been seen by the dealer to be replaced under warranty. Safety - issue was noticed before enough damage was done to be…

  Engine oil leak at the oil filter. The oil filter monting surface has a defect (not flat) allowing oil to push out. It is currently available for inspection, but it is scheduled to been seen by the dealer to be replaced under warranty. Safety - issue was noticed before enough damage was done to be unsafe. The leak was substantial, so I imagine it would lead to a safety issue due to abrupt engine failure. Oil filter was properly installed, verified by independent repair facility. Leak was reproduced / verified by independant repair facility. No warning indicators for the issue.

• Dec 30, 2021GA
  Exterior lighting · Seat belts
  The contact owns a 2021 Ram Promaster City. The contact had initially received a recall notice for NHTSA Campaign Number: 21V728000 (Exterior Lighting). He then called the dealer and was informed that there was an additional recall on the vehicle for NHTSA Campaign Number: 21V699000 (Seat Belts)…

  The contact owns a 2021 Ram Promaster City. The contact had initially received a recall notice for NHTSA Campaign Number: 21V728000 (Exterior Lighting). He then called the dealer and was informed that there was an additional recall on the vehicle for NHTSA Campaign Number: 21V699000 (Seat Belts) however, the parts for the recall repair were not yet available. He was informed that if he were to take possession of the vehicle, he would be held liable for any vehicle failure, including any recalls. The vehicle remained in the possession of the dealer and was not serviced. The manufacturer was also notified of the issue but offered no assistance. The contact stated that the manufacturer had exceeded reasonable amount of time for the recall repair. The contact had not experienced a failure. Parts distribution disconnect. Vehicle has been repaired. Dealer made arrangements for a loaner at no charge.

• Sep 20, 2021CA
  Equipment
  Two instances of rooftop tent opening without human interaction. Incident 1 // 9-17-21: Vehicle was parked and the front drivers side latch (attached photo) opened due to gusts of wind. Incident 2 // 9-19-21: When driving approximately 65 mph (cruise control) on Interstate 40 in Arizona…

  Two instances of rooftop tent opening without human interaction. Incident 1 // 9-17-21: Vehicle was parked and the front drivers side latch (attached photo) opened due to gusts of wind. Incident 2 // 9-19-21: When driving approximately 65 mph (cruise control) on Interstate 40 in Arizona, the front passenger side latch released and front passenger side of rooftop tent opened. I could not see that the tent opened while driving but noticed a change in wind noise and also steering control. I immediately pulled off the highway and observed that the front passenger side of the tent was open and about a 6 inch gap between the top and bottom halves of the tent was exposed. The center strap and drivers side latch were both still engaged. At the speed of travel it was possible for the tent to open completely which could have harmed my passengers or drivers of other vehicles on the road. I have seen numerous reports of this problem on the Roofnest Flock facebook group. The equipment is available for inspection upon request. It has not been inspected by anyone else. There was no warning sign other than the product opening while parked. The product was purchased in May 2021.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11000824"GENERATOR Engine Prior to alternator/generator removal: 1. Inspect & check all electrical connections to the alternator a. 2-way connector containing field control circuit & alternator sense voltage circuit. b. Unplug & plug-in the 2-way connector for field & sense circuit. Verify the connection is tight & check for any bent pins in alternator connector or damage to female terminals in connector. c. Check Alternator B+ Stud connection to be sure nut is securing positive cable terminal properly (i.e. nut is clamping terminal & connection is tight). d. Check fuse between the alternator B+ stud & PDC terminal to make sure it is not blown. e. Be sure to follow service manual sections on ALTERNATOR CONTROL CIRCUIT DIAGNOSTIC & ALTERNATOR SENSE CIRCUIT DIAGNOSTIC looking for any opens & shorts (to ground or battery voltage). 2. Check/verify all grounds in the charging system circuit a. Check tightness of mounting bolts securing alternator to engine block. Alternator is a case ground component. b. Check main ground from engine to chassis; connection must be tight. c. Check battery ground cable connections are tight. d. Potentially, loosen alternator mounting bolts, without removing alternator, and re-tighten to torque specifications in service manual. e. After all steps above are complete, re-start engine & check charging system operation. 3. Verify that the Smart Charging System is not the reason for alternator low voltage & current output (Amps). a. Alternator charging can be suspended during engine idle operation because of the Smart Charge strategy. b. Refer to service manual section ""System Operation - Smart Charging System"". c. Refer to Star Case S2008000031 Rev A for low charging voltage & Smart Charge Mode Voltage Range diagram & mode descriptions. d. The alternator has no internal regulator; thus, has no smart circuitry. All alternator control signals come from ECM. 4. If alternator is faulty, remove alternator & mounting bolts. Return alternator with bolts for analysis at QEC."
• 10251783Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
• 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
• 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
• 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
• 10243271A/C Diagnostic LOP Change
• 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
• 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
• 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
• 10241146A/C Diagnostic LOP Change (Except Alfa Romeo Vehicles)
• 10239957Water Quality When Mixed With Engine Coolant
• 10236969Mirror
• 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
• 10234420Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
• 10230407Base Headlamp Bright, Base Headlamp Black
• 10230405Telematic box module 2
• 10230183No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
• 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
• 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 10229059No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
• 10229041Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
• 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
• 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 10223097No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
• 10223079Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
• 10221787USB PORT, Media Hub For Android Auto and Apple Carplay issues, do not replace this part. Android Auto and Apple Carplay applications may not operate with the vehicle if an aftermarket cable is being used. Verify the functionality of these applications using an OEM Apple Lightning cable or an OEM provided USB cable for Android phones before performing any additional troubleshooting. For questions regarding Android Auto or Apply Carplay functionality, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
• 10221597No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
• 10221594Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
• 10221288Customer complaint includes a Mil-on condition. Upon further investigation, one or more of the following fault codes may be set in the PCM:
• 10221277Customer Complaint May Include Engine Oil Leak Or Consumption
• 10221184Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. The following enhancement is included in this software update:Scan tool enhancement to address the ?Valve Body Solenoid Learn Routine? not running and the error message stating ?Parking brake not applied?, even though it is applied.
• 10221153Battery Tester Warranty Code Procedures, Midtronics Charger Update Process
• 10221152Battery Tester Warranty Code Procedures, Medtronic Update Process
• 10221150Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
• 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
• 10220891A/C does not cool and vehicle is low on Freon charge but no leak is found with sniffer or black light anywhere in the system
• 10220889MIL (Malfunction Indicator Lamp) On, DTC P0073 Ambient Air Temperature Sensor Circuit High, B1029-12 External Temperature Sensor-Circuit Short To Battery
• 10220715No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
• 10220697Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off

Every RAM Promaster City model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.