2000 Saturn SW
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2000 Saturn SW. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2000 Saturn SW. Newest first.
Vehicle description: certain passenger vehicles fail to comply with the requirements of fmvss no. 301, "fuel system integrity." these vehicles were built with an inadequate vent valve weld on the top portion of the fuel tank.
Risk and remedy
Risk
Fuel spillage could occur during refueling or if the vehicle were involved in a rollover. if an ignition source were present, a fire could occur.
Remedy
Dealers will inspect the vehicle to ensure the fuel tank vent valve IS properly welded. if necessary, dealers will replace the fuel tank assembly.
Vehicle description: certain passenger vehicles, equipped with automatic transaxles, fail to comply with the requirements of fmvss no. 114, "theft protection." these vehicles were built with an improperly adjusted automatic transaxle park lock cable assembly. if improperly adjusted, it IS possible to shift from the "park" position with the ignition key…
Risk and remedy
Risk
This condition increases the risk of a crash resulting from the unintended movement of parked vehicles.
Remedy
Saturn IS asking owners and retailers to perform a functional check of the automatic transaxle park lock cable assembly operation, and if necessary, to have the cable adjusted. if owners are not comfortable performing the functional check themselves, they can have their dealer perform this inspection for them.
Vehicle description: passenger vehicles equipped with a console armrest fail to comply with requirements of fmvss no. 201, "occupant protection in interior impacts." the armrests were produced with a latch that will not withstand the vertical force requirements of the standard.
Risk and remedy
Risk
In the event of a crash, the latch may open and the armrest or the contents of the console could injure an occupant.
Remedy
Dealers will replace the console armrest latch.
Vehicle description: passenger vehicles. these vehicles do not comply with requirements of fmvss no. 210, "seat belt assembly anchorages." some of the vehicles were produced with seat belt shoulder guide anchor bolts that were not adequately tightened at the center pillar and could fall out, making the seat belt inoperative.
Risk and remedy
Risk
In the event of a crash, the seat occupant may not be properly restrained.
Remedy
Dealers will inspect these vehicles for proper installation and torque of the seat belt shoulder guide anchor bolts.
Vehicle description: passenger vehicles. these vehicles do not comply with requirements of fmvss no. 135, "passenger car brake systems." these vehicles were produced with brake pipe attachment nuts that may not be tightened to specifications.
Risk and remedy
Risk
If the brake pipe nuts are not properly tightened, brake fluid leakage could occur, increasing the brake's stopping distance.
Remedy
Dealers will inspect the brake pipe nuts for leakage, verify they are tightened to specifications, and replace the brake pipes if needed.
Vehicle description: passenger vehicles. these vehicles do not comply with requirements of fmvss no. 208, "occupant crash protection." some of these vehicles were manufactured with welds in the instrument panel carrier assembly that do not meet saturn quality standards.
Risk and remedy
Risk
A front seat occupant, particularly an unbelted occupant, may have an increased risk of injury in a frontal crash.
Remedy
Dealers will repair the vehicle's instrument panel carrier assembly.
Vehicle description: passenger vehicles. these vehicles do not comply with requirements of fmvss no. 581, "bumper standard." these vehicles were produced with rear bumper fasteners that may be loose or missing.
Risk and remedy
Risk
If the fasteners are loose or missing, the rear bumper may not absorb energy as it was designed to do in the event of a rear end collision.
Remedy
Dealers will verify that the rear bumper beam fasteners are present and properly tightened and, if missing, install new fasteners.
Owner complaints
15 complaints2 involved a crash1 involved a fire2 injuries
What owners report most
Latest complaints
- Electrical system · Engine · Fuel/propulsion system
Airbag should have been recalled and was in system but not replaced. ignition problems with fuel not able to reach. ignition switch wire burned and was recalled prior but not given to my make model. muffler not able to control exhaust system.
- Unknown or other
On may 29TH, 2015 at approx. 5:30 pm est the driver's 2000 saturn SW2 had uncontrollable sudden full throttle acceleration when put into drive from reverse without a foot on the accelerator & could not be stopped by brakes while attempting to leave a private business parking lot onto a public…
On may 29TH, 2015 at approx. 5:30 pm est the driver's 2000 saturn SW2 had uncontrollable sudden full throttle acceleration when put into drive from reverse without a foot on the accelerator & could not be stopped by brakes while attempting to leave a private business parking lot onto a public roadway. Driver travelled approx.100 ft. With full on brakes applied & avoided potentially striking oncoming road traffic by driving parallel to the roadway & driving head on into a roadway bridge guardrail terminal end to stop the forward progress of the vehicle. There was severe frontal damage to the front of the vehicle. Airbags deployed. Driver was extracted from the vehicle by the local emergency rescue squad & transported to the emergency room of the local hospital. The driver was treated for multiple fractures to the left foot & right ankle. Other physical injuries are presenting themselves a few days after the accident.
- Electrical system
TL* the contact owned a 2000 saturn sw. While driving approximately 35 mph, the contact heard an abnormal noise coming from the rear of the vehicle. The contact noticed flames under the hood. The fire department extinguished the fire and determined that it was due to an electrical failure. The…
TL* the contact owned a 2000 saturn sw. While driving approximately 35 mph, the contact heard an abnormal noise coming from the rear of the vehicle. The contact noticed flames under the hood. The fire department extinguished the fire and determined that it was due to an electrical failure. The vehicle was destroyed. The manufacturer was not notified. The vin was unavailable. The approximate failure mileage was 200,000.
- Latches/locks/linkages
TL* the contact owns a 2000 saturn SW2. The contact was driving approximately 15 mph and attempting a turn when the rear driver side door released independently and swung open. The manufacturer was notified of the failure and the contact was told that the failure was common amongst the year, make…
TL* the contact owns a 2000 saturn SW2. The contact was driving approximately 15 mph and attempting a turn when the rear driver side door released independently and swung open. The manufacturer was notified of the failure and the contact was told that the failure was common amongst the year, make and model. The vehicle was not taken to have the failure diagnosed nor repaired. The failure and current mileage was 230,000. updated 04/25/11 *bf
- Fuel system, gasoline › Storage › Tank assembly
Letter on behalf of constituent (nc) the defective fuel tank vent valve on her 2000 saturn SW1, dealer claims there was no recall. the consumer stated the vehicle would not take gas. She went to an auto repair shop and they printed out a recall and advised her to take the vehicle to the dealer. *Jb
- Engine and engine cooling › Engine
Two major gasket problems with a saturn 2000 SW2 wagon. total repair cost $1,500.*ak
- Engine and engine cooling › Engine
While driving at a low speed and without any warning vehicle would stall, causing the driver to pull off the road.*ak
- Suspension › Front › Stabilizer bar
The rear stabilizer links froze up, due to road dirt, salt etc. *Ak *jb
- Seats › Front assembly › Recliner
The bolts broke, which caused the driver seat back to collapse.*jb
- Engine and engine cooling › Engine
While driving at highway speed the engine shut down causing lost of power steering. Consumer was able to coast to the side of the road. dealer notified said crank shaft position sensor IS defective. Ts *tt
- Air bags · Steering
At about 70 mph on the fwy. I swerved left to avoid a collision, ABS caused steering to tighten, I was unable to straighten, so I pulled harder to the right. I skidded right, hitting another vehicle with my right front at about 50mph. the srs air bags failed to deploy. I continued to slide to…
At about 70 mph on the fwy. I swerved left to avoid a collision, ABS caused steering to tighten, I was unable to straighten, so I pulled harder to the right. I skidded right, hitting another vehicle with my right front at about 50mph. the srs air bags failed to deploy. I continued to slide to 180 degrees. rolling backwards, I hit the center divider with the right rear bumper at about 35 mph. the impact caused my seat back to collapse (recline), although I was wearing a seatbelt. I was ejected and slammed the back of my head into the ceiling of the car. I was hospitalized. The impact also ruptured the fuel tank. driving conditions were clear, and dry. dt
- Service brakes, hydraulic › Foundation components › Disc › Rotor
When the consumer applied the brakes the wheel shakes due to warped rotors. The rotors had been cut at 22000 miles because of the same problem. Consumer believes that the rotors were defective. *yh
- Engine and engine cooling › Exhaust system
Stress induced cracking of exhaust system resonator outlet end plate.*ak
- Visibility › Windshield
While driving in warm temperature windshield will get film on inside without any warning. dealer/manufacturer aware of the problem, no solution yet. *ak *ML
- Seats › Mid/rear assembly
Rear passenger's seat built-in locking clip; upon installing a child seat the locking clip broke in half. Consumer has contacted manufacturer. Parts beening sent out. Please provide any further details. *Ak
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
- 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
- 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
- 10248444Vehicle Recalls
- 10246952Programming And Activation Of Replacement OnStar Modules.
- 10246951Programming And Activation Of Replacement OnStar Modules.
- 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
- 10245950Canadian Customers Unable To Place Calls In The United States
- 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 10235799This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10234110This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10233370This service bulletin revision provides a repair procedure to Remove Debris from Evaporator Case, Disinfect evaporator or Apply Cooling coil coating and install blower motor control module to correct a customer concern of A/C Odor at start-up.
- 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
- 10232136This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
- 10227056This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10222796This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10214869This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10209980This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10209921This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10190934Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
- 10190933Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
- 10190932Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
- 10190931Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
- 10190512OnStar Voice Fallback Number Update Some customers may have received a letter from OnStar stating that "We recently tried to provide a software update to the OnStar hardware in your vehicle. However, your system could not be updated remotely. As a result, some of your OnStar system functions may not be working as expected." The customer is further instructed in this letter to "Please contact your dealer or any dealer near you as soon as possible to schedule an appointment for this no-cost software update. Your dealer will reprogram your OnStar module with an update. This is for vehicles that have previously received the Canada upgrade as described in Service Bulletin #15-08-44-001F."
- 10176607This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10125106This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
- 10083900This preliminary information communication advises the technician, if unable to place an onstar call in the ignition on mode after the onstar canada upgrade to contact the gm technical assistance center onstar group for further assistance.
- 10083898This preliminary information communication advises the technician if unable to place an onstar call in the ignition on mode after the onstar canada upgrade, to contact the gm technical assistance center onstar group for further assistance.
- 10083884This preliminary information communication advises the technician on the steps for diagnosing the concern. The vehicle may be unable to connect to onstar using the white, blue or red onstar buttons.
- 10083489This preliminary information communication advises the technician the steps on repairing the concern. A customer may identify a concern of unable to reactivate a vehicle's onstar that has been previously disabled by onstar. Dealer IS to call general motors technical assistance center for further assistance if the concern IS still present.
- 10083484This preliminary information communication provides information to help the dealership technicians perform a parasitic drain test for the onstar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar system.
- 10082869This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
- 10082814This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
- 10082506This technical bulletin provides a procedure to reprogram the media disc player with the latest calibrations to correct a condition of the rear entertainment system not operating as intended in colder ambient temperature areas due to calibration concerns.
- 10078735This preliminary information communication provides information to help the dealership technicians perform a parasitic drain test for the onstar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar system.
- 10078734This preliminary information communication advises the technician the steps on repairing the concern. A customer may identify a concern of unable to reactivate a vehicle's onstar that has been previously disabled by onstar. Dealer IS to call general motors technical assistance center for further assistance if the concern IS still present.
Every Saturn SW model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.