2001 Saturn SW
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2001 Saturn SW. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2001 Saturn SW. Newest first.
Vehicle description: certain passenger vehicles fail to comply with the requirements of fmvss no. 301, "fuel system integrity." these vehicles were built with an inadequate vent valve weld on the top portion of the fuel tank.
Risk and remedy
Risk
Fuel spillage could occur during refueling or if the vehicle were involved in a rollover. if an ignition source were present, a fire could occur.
Remedy
Dealers will inspect the vehicle to ensure the fuel tank vent valve IS properly welded. if necessary, dealers will replace the fuel tank assembly.
Vehicle description: certain passenger vehicles, equipped with automatic transaxles, fail to comply with the requirements of fmvss no. 114, "theft protection." these vehicles were built with an improperly adjusted automatic transaxle park lock cable assembly. if improperly adjusted, it IS possible to shift from the "park" position with the ignition key…
Risk and remedy
Risk
This condition increases the risk of a crash resulting from the unintended movement of parked vehicles.
Remedy
Saturn IS asking owners and retailers to perform a functional check of the automatic transaxle park lock cable assembly operation, and if necessary, to have the cable adjusted. if owners are not comfortable performing the functional check themselves, they can have their dealer perform this inspection for them.
Owner complaints
6 complaints1 involved a crash1 injuries
What owners report most
Latest complaints
- Electrical system
TL* the contact owns a 2001 saturn sw. The contact stated that while driving 35 mph, the key released from the ignition switch. The failure occurred on several occasions. The vehicle was taken to a dealer where it was diagnosed that the cylinder lock and the key needed to be replaced. The…
TL* the contact owns a 2001 saturn sw. The contact stated that while driving 35 mph, the key released from the ignition switch. The failure occurred on several occasions. The vehicle was taken to a dealer where it was diagnosed that the cylinder lock and the key needed to be replaced. The manufacturer was made aware of failure and stated that the vin was not included in a related manufacturers recall. The failure mileage was 64,734.
- Fuel/propulsion system
TL* the contact owns a 2001 saturn sw. The contact stated that there was a visible fuel leak. The vehicle was not diagnosed or repaired. The manufacturer was contacted about the failure. The failure mileage was approximately 41,000.
- Fuel system, gasoline › Storage › Tank assembly
Tl*the contact owns a 2001 saturn SW2. while driving between 20-25 mph over a speed bump, the fuel tank detached and was dragging on the ground. the contact looked underneath the vehicle and discovered that both brackets were rotted off of the fuel tank. one bracket fell off completely. he…
Tl*the contact owns a 2001 saturn SW2. while driving between 20-25 mph over a speed bump, the fuel tank detached and was dragging on the ground. the contact looked underneath the vehicle and discovered that both brackets were rotted off of the fuel tank. one bracket fell off completely. he called the dealer to inquire about recalls. there was no rust on the vehicle except on the fuel tank brackets. the vehicle has not been inspected by a mechanic. the current and failure mileages were 68,000.
- Seat belts › Rear/other
Dt: contact stated when latching the rear driver side seat belt it will not retract to secure the occupant. as the occupant leaned forward the seat belt continued to loosen. the service dealer said the retractor needed to be replaced. the seat belt was used under light to normal conditions. *ak
- Engine and engine cooling › Exhaust system › Manifold/header/muffler/tail pipe
While driving, anti freeze leaked from the vehicle. the mechanic determined that the problem pertained to the intake manifold. *ak *sc
- Power train › Automatic transmission › Park/neutral start interlock switch
Vehicle was in park. while walking away gear some how jumped into reverse and began to roll backwards towards another vehicle. Saturn has been ocntacted. *ak the manufacturer could not find any mechanical cause for the incident. *yh
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
- 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
- 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
- 10249011This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
- 10248444Vehicle Recalls
- 10247681Information On Requests To Add OnStar Bluetooth Option.
- 10246952Programming And Activation Of Replacement OnStar Modules.
- 10246951Programming And Activation Of Replacement OnStar Modules.
- 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
- 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
- 10245950Canadian Customers Unable To Place Calls In The United States
- 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10244201This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 10235799This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10234110This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10233370This service bulletin revision provides a repair procedure to Remove Debris from Evaporator Case, Disinfect evaporator or Apply Cooling coil coating and install blower motor control module to correct a customer concern of A/C Odor at start-up.
- 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
- 10232136This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
- 10227056This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10224820This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10222796This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10214869This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10209980This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10209921This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10190934Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
- 10190933Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
- 10190932Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
- 10190931Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
- 10190512OnStar Voice Fallback Number Update Some customers may have received a letter from OnStar stating that "We recently tried to provide a software update to the OnStar hardware in your vehicle. However, your system could not be updated remotely. As a result, some of your OnStar system functions may not be working as expected." The customer is further instructed in this letter to "Please contact your dealer or any dealer near you as soon as possible to schedule an appointment for this no-cost software update. Your dealer will reprogram your OnStar module with an update. This is for vehicles that have previously received the Canada upgrade as described in Service Bulletin #15-08-44-001F."
- 10176607This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10125106This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
- 10083900This preliminary information communication advises the technician, if unable to place an onstar call in the ignition on mode after the onstar canada upgrade to contact the gm technical assistance center onstar group for further assistance.
- 10083898This preliminary information communication advises the technician if unable to place an onstar call in the ignition on mode after the onstar canada upgrade, to contact the gm technical assistance center onstar group for further assistance.
- 10083884This preliminary information communication advises the technician on the steps for diagnosing the concern. The vehicle may be unable to connect to onstar using the white, blue or red onstar buttons.
- 10083489This preliminary information communication advises the technician the steps on repairing the concern. A customer may identify a concern of unable to reactivate a vehicle's onstar that has been previously disabled by onstar. Dealer IS to call general motors technical assistance center for further assistance if the concern IS still present.
- 10083484This preliminary information communication provides information to help the dealership technicians perform a parasitic drain test for the onstar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar system.
Every Saturn SW model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.