2020 Subaru Ascent
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Subaru › Ascent › 2020
These records cover every 2020 Subaru Ascent. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2020 Subaru Ascent. Newest first.
Subaru of America, Inc. (Subaru) is recalling certain 2026 Crosstrek Hybrid, 2025-2026 Forester Hybrid, Forester, and 2019-2026 Ascent vehicles. These vehicles were manufactured with an incorrect Gross Axle Weight Rating (GAWR) on the certification label. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard…
Risk and remedy
Risk
An incorrect GAWR label may lead to an overloaded vehicle, increasing the risk of a crash.
Remedy
Subaru will mail a new certification label to owners, free of charge. Owners may also choose to have a dealer install the new label, free of charge. Letters informing owners of the safety risk were mailed August 27, 2026. Additional letters will be mailed once the remedy is available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRH-26.
Subaru of America, Inc. (Subaru) is recalling certain 2019-2022 Ascent vehicles. The ground bolt that secures the ground terminal of the Positive Temperature Coefficient (PTC) heater may have been improperly fastened, which could result in melting of the ground terminal and surrounding components.
Risk and remedy
Risk
A melting ground terminal increases the risk of a fire.
Remedy
Owners are advised to park their vehicle away from structures and to avoid leaving the vehicle unattended while the engine is running. An owner who notices or smells smoke coming from the dash or driver's footwell area should immediately stop operating the vehicle and turn the ignition switch to the "Off" position. Dealers will replace the PTC heater ground bolts and if necessary, replace the ground wire and the connector holder, free of charge. Owner notification letters are expected to be mailed February 6, 2023. Owners may contact Subaru's customer service at 1-844-373-6614. Subaru's number for this recall is WRL-22.
Subaru of America, Inc. (Subaru) is recalling certain 2020 Ascent vehicles. Due to an incorrect tapered hole in the housing, the front tie rod ends may not fit properly. The improper fit can result in the tie rods and housings being deformed during assembly and service replacement if excessive torque is applied.
Risk and remedy
Risk
The tie rods may separate from the housing, causing a loss of steering control and increasing the risk of a crash.
Remedy
Dealers will replace the left and right front tie rod ends and housings, free of charge. Owner notification letters were mailed February 7, 2022. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRL-21.
Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2020 Legacy and Outback vehicles. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.
Risk and remedy
Risk
An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.
Remedy
Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehicles previously recalled under 19V-855. Vehicles previously recalled under 19V-855 will need to have the new remedy performed for this recall once available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRK-21.
Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2018 Forester, 2018-2020 Impreza, Legacy, Outback, 2018-2019 BRZ, WRX, and Toyota 86 vehicles. The low-pressure fuel pump inside the fuel tank may fail.
Risk and remedy
Risk
Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Remedy
Dealers will replace the low-pressure fuel pump, free of charge. Owner notification letters were mailed September 24, 2021. Subaru and Toyota owners may call customer service at 1-844-373-6614. Subaru's number for this recall is WRG-21.
Owner complaints
324 complaints6 involved a crash1 involved a fire5 injuries
What owners report most
Latest complaints
- Power train
The contact owns a 2020 Subaru Ascent. The contact stated that on multiple occasions, while driving at various undisclosed speeds, the vehicle unexpectedly failed to accelerate and lost power. The contact also stated that the vehicle felt sluggish while driving. The vehicle was taken to a dealer…
The contact owns a 2020 Subaru Ascent. The contact stated that on multiple occasions, while driving at various undisclosed speeds, the vehicle unexpectedly failed to accelerate and lost power. The contact also stated that the vehicle felt sluggish while driving. The vehicle was taken to a dealer, where it was diagnosed with chain slippage in the clutch, causing the loss of power. The contact was informed that the transmission had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure via telephone. The approximate failure mileage was 137,000.
- Unknown or other
I have experienced problems with the rear lift gate on multiple occasions. It is working intermittently and locking me out. The beeping while the car is in motion is continuous and it drained the battery; I had to purchase a new battery. Another time we had to disconnect the battery (as suggested by the dealership) and reconnect it to fix the problem.
- Wheels
After replacing tires I started hearing noises from rear wheel. I searched online and it appears there is an issue with wheel bearings on several Subaru models (see YOUTUBE video by FIXBOOK dated July 12, 2026). The issue was confirmed by my Subaru dealer on 9/10/2026. Subary wheel bearings prior…
After replacing tires I started hearing noises from rear wheel. I searched online and it appears there is an issue with wheel bearings on several Subaru models (see YOUTUBE video by FIXBOOK dated July 12, 2026). The issue was confirmed by my Subaru dealer on 9/10/2026. Subary wheel bearings prior to 2026 were subject to poor design resulting in premature corrosion, complete failure and possible separation from the under carriage. New Subaru wheel bearing was redesigned in 2026 (part 28473XC00E), but Subaru never recalled the defective wheel bearings in Tribeca, WRX, Forester, Ascent, Outback models sold prior to 2026?
- Exterior lighting
Subaru has a known problem/design with their LED daytime running lamps on the Ascent model. Dealerships are seeing a high failure rate of these LED lights, and it is always with the left side headlamp assembly. The LED strip quits working. In my case my car has about 42,000 miles on it with…
Subaru has a known problem/design with their LED daytime running lamps on the Ascent model. Dealerships are seeing a high failure rate of these LED lights, and it is always with the left side headlamp assembly. The LED strip quits working. In my case my car has about 42,000 miles on it with estimated 1,500 hours of operation. LED lights are designed to last a minimum of 30,000 and up to 100,000 hours. I see these models all the time with their left daytime lamps out. These lamps are provided for safety reasons and to bring visibility to other drivers. Even Subaru dealer's state that this is a known problem and always the left headlight assembly. FYI, the whole assembly needs to be replaced, and the price range is around $1,300.00. I have reached out to Subaru, and they simply state vehicle is out of warranty, and they will not do anything about it. I say this is a known imbedded issue due to engineering, quality control etc. and each delivered vehicle is more than likely going to experience this issue which again I perceive as a safety issue. Again, LED lights are used because of their long-life expectancy. But in Subaru's case, their lights are designed to fail much sooner than one should reasonably expect. Subaru needs to do the right thing and stand behind these faulty lights and return the vehicle to the level of safety it was intended to offer. However, the only way they are possibly going to consider this if the NHTSB gets involved. I have provided a phot of my car showing the lights. One is lit and one is not.
- Power train
The contact owns a 2020 Subaru Ascent. The contact stated that while driving at an undisclosed speed, the vehicle was skipping. The failure was recurrent. The contact associated the failure with NHTSA Campaign Number: 21V955000 (Power Train); however, the dealer informed the contact that the recall…
The contact owns a 2020 Subaru Ascent. The contact stated that while driving at an undisclosed speed, the vehicle was skipping. The failure was recurrent. The contact associated the failure with NHTSA Campaign Number: 21V955000 (Power Train); however, the dealer informed the contact that the recall repair was completed on July 15, 2025. The contact was the vehicle owner on that date and stated that the vehicle was never taken to the dealer for the recall repair. The dealer diagnosed the vehicle with CVT failure and advised that the vehicle was outside warranty coverage. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 145,000.
- Power train
1. The vehicle is experiencing a transmission malfunction/failure. The dealership was able to replicate the issue and confirm the malfunction, which caused the check engine light to illuminate. The vehicle is currently being evaluated by the dealership, and any failed components should be available…
1. The vehicle is experiencing a transmission malfunction/failure. The dealership was able to replicate the issue and confirm the malfunction, which caused the check engine light to illuminate. The vehicle is currently being evaluated by the dealership, and any failed components should be available for inspection upon request while the vehicle remains in their possession. 2.The transmission malfunction is affecting the vehicle's ability to accelerate, maintain speed, and operate predictably. This creates a potential safety risk when the vehicle loses power or experiences unexpected changes in operation while driving, particularly in traffic or at highway speeds. The concern is heightened because transmission failure can leave the vehicle unable to safely continue operating and can cause collisions with other vehicles on the road. 3.Yes. The dealership was able to reproduce the issue, which caused the check engine light to illuminate and confirmed that there is an active problem requiring further diagnosis/repair. 4.The vehicle has been inspected and evaluated by the Subaru dealership/service center. To my knowledge, it has not been inspected by police or insurance representatives. Subaru of America has reviewed my case and the repair history but has declined assistance with the repair or to open a case. 5.Yes. The dealership was able to reproduce the issue, which caused the check engine light to illuminate. The transmission problem was also associated with operation that prompted me to have the vehicle inspected. The check engine light illuminated when the dealership replicated the condition. This current transmission is a replacement transmission done by Subaru do to a previous recall of the same issue. The current transmission only has 83,000 miles on it.
- Power train
The Transmission is slipping on my 2020 Ascent. I had the recall wrk-21 performed in July of 2025. Over the last 6 months the car has been hesitant to go at low speeds and shakes at high speeds. Over the last month the transmission started to slip while accelerating , especially up hill. There…
The Transmission is slipping on my 2020 Ascent. I had the recall wrk-21 performed in July of 2025. Over the last 6 months the car has been hesitant to go at low speeds and shakes at high speeds. Over the last month the transmission started to slip while accelerating , especially up hill. There would be a grinding noise and RPMs would jump. I took it to the dealer and they confirmed it was the transmission via camera test. I called Subaru of America for goodwill help with the cost knowing that there is a know issue with the transmission. They refused due to the mileage, 121,010. •What component or system failed or malfunctioned, and is it available for inspection upon request? The transmission is slipping •How was your safety or the safety of others put at risk? The car is hesitant to go from a starting position. The car will jerk back and forth when trying accelerate when merging or crossing a road. I am also very concerned of catastrophic failure at high speeds. •Has the problem been reproduced or confirmed by a dealer or independent service center? The dealer has confirmed the transmission is bad via camera teat. •Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Just the dealership •Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No dash lights just the feeling and sounds.
- Suspension
My strut bearings have been replaced several times in the drivers sides, my shock and strut has been replaced twice on the drivers side and now the passenger side is doing the same thing. The dealership tells me that there is nothing wrong but research shows this car has known suspension issues. My…
My strut bearings have been replaced several times in the drivers sides, my shock and strut has been replaced twice on the drivers side and now the passenger side is doing the same thing. The dealership tells me that there is nothing wrong but research shows this car has known suspension issues. My passenger side front has a loud metallic grinding sound when turning the wheel in park. I’m told this is the brakes which makes no sense. The car feels like it is on ice or sailing down the road, and the car does not maintain an alignment causing the insides of tires to wear out after 15,000-20,000 miles and need to be replaced.
- Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings · Service brakes
I am reporting a repeat safety concern involving a 2020 Subaru Ascent. The vehicle was involved in two separate collisions after failing to decelerate as expected following normal brake pedal application. The first incident occurred on January 26, 2026. While approaching a traffic signal, I applied…
I am reporting a repeat safety concern involving a 2020 Subaru Ascent. The vehicle was involved in two separate collisions after failing to decelerate as expected following normal brake pedal application. The first incident occurred on January 26, 2026. While approaching a traffic signal, I applied the brakes under normal driving conditions. The vehicle did not slow as expected and struck the rear of another vehicle. Property damage occurred, but no injuries were reported. The second incident occurred on May 5, 2026. While approaching a stop sign at approximately 35 mph, I again applied the brakes under normal driving conditions. The vehicle did not decelerate as expected and entered the intersection, colliding with a vehicle traveling perpendicular to my direction of travel. Both vehicles were towed. No injuries were reported. During both incidents, there were no forward collision warnings, automatic emergency braking interventions, or other alerts observed prior to impact. Following the second collision, the vehicle was inspected by an independent technician. Brake components inspected were found to be within serviceable condition and no evidence of neglect or improper maintenance was noted. During inspection, abnormal brake pedal behavior was observed, including continued downward pedal travel while steady pressure was applied. The technician documented that the reported condition was not consistent with normal braking performance and stated that an intermittent hydraulic and/or brake assist related issue could not be ruled out. The vehicle has been regularly maintained according to manufacturer recommendations. Due to the repeat nature of the condition, the lack of warning or intervention from safety systems, and the occurrence of two collisions despite normal brake application, I believe this condition represents a significant safety risk. The vehicle has since been declared a total loss and may be available for further inspection.
- Unknown or other
I am submitting this complaint regarding a known exhaust manifold/flex pipe failure affecting my 2020 Subaru Ascent Touring (VIN: [XXX] ). My vehicle was diagnosed by a Subaru dealership with a “broken flex pipe on the header” causing excessive exhaust noise and exhaust leak concerns. Repair…
I am submitting this complaint regarding a known exhaust manifold/flex pipe failure affecting my 2020 Subaru Ascent Touring (VIN: [XXX] ). My vehicle was diagnosed by a Subaru dealership with a “broken flex pipe on the header” causing excessive exhaust noise and exhaust leak concerns. Repair estimate was slightly over $2,000. After researching the issue, I discovered numerous reports from other Subaru Ascent owners describing identical failures involving cracked exhaust manifold welds and failed flex pipe sections. Subaru has also issued TSB 09-106-23 involving exhaust manifold weld cracking and redesigned replacement components for this issue. Symptoms began in the low 70,000-mile range and progressively worsened before formal diagnosis at approximately 83,000 miles. This appears to be a widespread defect involving emissions/exhaust components. Many owners online report loud cold-start exhaust noise, cracked manifold welds, failed flex pipe sections, exhaust fumes/smells, and expensive manifold replacement repairs. My concern is both the widespread nature of the defect and Subaru’s handling of complaints regarding the issue. Initially, Subaru denied assistance because the vehicle has a branded title. After documentation was provided showing federally mandated emissions-related coverage/extensions were active for this VIN regardless of title status, the denial basis changed to mileage. After explaining symptoms began prior to the mileage threshold, Subaru then cited lack of dealership service history after my ownership despite the vehicle being regularly maintained by a local mechanic. I am requesting NHTSA review whether this exhaust manifold/flex pipe defect represents a broader reliability and emissions-related defect trend affecting Subaru Ascent vehicles. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Engine · Power train
The pressure sensor coming out of the transmission has failed, and it's pushed transmission fluid throughout the engine harness, transmission harness, the bull harness in the dash and the 02 sensors. All of those have been damaged. The car is now unsafe to drive due to the pressure sensor failing.…
The pressure sensor coming out of the transmission has failed, and it's pushed transmission fluid throughout the engine harness, transmission harness, the bull harness in the dash and the 02 sensors. All of those have been damaged. The car is now unsafe to drive due to the pressure sensor failing. This information comes directly from the Subaru dealership. There was nothing prior to this that indicated there was a problem. I bought the car from a certified dealership 8 months ago and it was a certified pre owned vehicle.
- Power train · Steering
The contact owns a 2020 Subaru Ascent. The contact stated that while driving on several occasions at various speeds, the steering wheel became loose and then tightened inadvertently. The vehicle was taken to a dealer where the failure could not be replicated. The contact also stated that on several…
The contact owns a 2020 Subaru Ascent. The contact stated that while driving on several occasions at various speeds, the steering wheel became loose and then tightened inadvertently. The vehicle was taken to a dealer where the failure could not be replicated. The contact also stated that on several occasions while driving, the vehicle puttered and a grinding noise was heard emanating from the engine compartment. The vehicle was towed to a dealer where it was diagnosed during the first visit to be the transmission module. The vehicle was repaired, but the failure persisted sporadically. The vehicle was taken back to the same dealer on the second visit where it was diagnosed that the transmission needed to be replaced. The vehicle was repaired, but the failures reoccurred approximately 5,000 miles later. The vehicle was taken to the same dealer on the third visit where it was diagnosed that the tie rod end and bushing needed to be replaced. The vehicle was repaired, but the failure persisted. The vehicle was then taken to the same dealer on the fourth visit where the failure could not be replicated. The vehicle towed to the same dealer on a fifth occasion where it was diagnosed that the transmission needed to be replaced. The vehicle was not repaired as of yet. The manufacturer was notified of the failure and a complaint was filed. The failure mileage was approximately 82,000.
- Service brakes
In December 2025, I had brake replacement, tire service, and wheel alignment performed at Monro Auto Service located at [XXX] child were traveling on the highway during a winter storm when the brakes began making a loud banging noise. My wife was unable to immediately locate a service location and…
In December 2025, I had brake replacement, tire service, and wheel alignment performed at Monro Auto Service located at [XXX] child were traveling on the highway during a winter storm when the brakes began making a loud banging noise. My wife was unable to immediately locate a service location and was forced to continue driving for an extended period in winter storm conditions while in fear for her safety and that of our child. When she was finally able to reach a second Monro location between [XXX] and [XXX] , a technician discovered that one brake caliper bolt was missing entirely and a second was dangerously loose. The vehicle had been driven at highway speeds in a winter storm with an improperly and incompletely assembled brake system for an extended distance before help was found. The second Monro location secured the caliper bolt and confirmed the vehicle safe to continue. The original Fairport location was contacted and their manager acknowledged the issue but has failed to provide any meaningful resolution after nearly four months. In a formal BBB complaint response, Monro Inc. confirmed that the caliper bolt had not been properly secured and acknowledged filing an insurance claim for resulting rim damage — an implicit admission of negligence. I am filing this complaint because an improperly assembled brake system — specifically a missing caliper bolt — represents a serious and potentially fatal safety hazard. If this is a pattern of negligence at Monro locations, other consumers may be at risk. BBB Complaint Case #XXX is on file documenting Monro's formal response and admission. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Fuel/propulsion system · Power train
My 2020 Subaru Ascent struggles to retain power when accelerating, especially from stopping and especially when the fuel is low. The vehicle stalls or loses some power when trying to accelerate. The check engine light is not on and there is no other indication that there is a problem with the…
My 2020 Subaru Ascent struggles to retain power when accelerating, especially from stopping and especially when the fuel is low. The vehicle stalls or loses some power when trying to accelerate. The check engine light is not on and there is no other indication that there is a problem with the vehicle. I have discussed it thoroughly with my mechanic and we both think it sounds like a fuel pump issue. He looked at the other Subaru recalls and thinks my vehicle should be included in the other Subaru fuel pump recall (NHTSA ID Number: 21V587000). Does my vehicle qualify for this fuel pump recall? Thank you.
- Structure › Body · Unknown or other · Visibility/wiper
Water intrusion occurred inside the vehicle, resulting in extensive mold contamination throughout the interior, including the seats, front and rear carpets, and a child’s car seat. The source of the water intrusion has not been identified. The vehicle was taken to an authorized Subaru retailer…
Water intrusion occurred inside the vehicle, resulting in extensive mold contamination throughout the interior, including the seats, front and rear carpets, and a child’s car seat. The source of the water intrusion has not been identified. The vehicle was taken to an authorized Subaru retailer, which confirmed in writing that water was present inside the vehicle and that mold was covering interior surfaces, including the child’s car seat. The only diagnostic test performed was a car wash to check for a sunroof leak, which did not replicate the issue. The retailer indicated that further diagnostic work would require significant interior disassembly and cleaning at the owner’s expense before the source of the leak can be determined. The manufacturer was contacted regarding this issue and declined assistance, citing “lack of required maintenance.” The specific maintenance and its relationship to the water intrusion have not been identified, and the source of the leak has not yet been diagnosed. The retailer also stated that technicians would not enter the vehicle due to the extent of the mold contamination. As a result, standard recall repairs have not been performed while the vehicle remains in this condition. A dealership technician also documented in a recorded inspection that water was present beneath the carpet, that the source of the leak could not be identified without further disassembly, and that the extent of mold contamination created an unsafe working environment. This condition creates a potential health and safety concern due to mold exposure inside the passenger cabin, particularly for a child occupant. In addition, excessive interior moisture has caused window fogging, which may impair visibility while driving. No warning lights or prior indicators were observed before the issue was discovered. The problem has been confirmed by a Subaru retailer. The vehicle remains available for inspection.
- Back over prevention › Warnings · Engine · Lane departure › Assist
I was driving and I got check engine light and all safety features disabled while I was in the freeway, luckily I was able to drive to nearby Subaru dealer for inspection and I found out that there was a recall on the engine for this vehicle and when I contacted the manufacturer they asked me to…
I was driving and I got check engine light and all safety features disabled while I was in the freeway, luckily I was able to drive to nearby Subaru dealer for inspection and I found out that there was a recall on the engine for this vehicle and when I contacted the manufacturer they asked me to take it for diagnostics and I did that at a Subaru retailer, but the case manager told me that this recall is being completed for the previous owner of the vehicle and cannot help me with anything, which was never disclosed when I was buying the vehicle.
- Power train
Vehicle: 2020 Subaru Ascent (Build Date: March 2020) Component: Power Train – Automatic Transmission – Hydraulic Pressure Sensor / Wiring Harness The vehicle developed a flashing "Transmission Service" warning and check engine light. It was inspected by a certified technician at Lithia Reno…
Vehicle: 2020 Subaru Ascent (Build Date: March 2020) Component: Power Train – Automatic Transmission – Hydraulic Pressure Sensor / Wiring Harness The vehicle developed a flashing "Transmission Service" warning and check engine light. It was inspected by a certified technician at Lithia Reno Subaru. Diagnostic scan identified multiple transmission-related codes including P0137, P0700, P2096, P1867, P0867, P2723, and P0841. The technician documented the root cause as: "Found pressure sensor leaking oil through all harnesses." According to the dealership diagnosis, the transmission hydraulic pressure sensor failed and allowed transmission fluid to migrate into the vehicle's electrical wiring harness system. Fluid traveled through the transmission harness and continued into the bulkhead and engine harnesses, contaminating multiple electrical systems. Due to the extent of contamination, the dealership determined that all three harnesses must be replaced. The repair estimate is approximately $8,933. Transmission fluid entering the wiring harness can disrupt communication between the transmission control system and other powertrain components. This electrical contamination can cause erratic transmission operation or sudden loss of propulsion while the vehicle is in motion, increasing crash risk. Subaru has issued recalls and service bulletins involving CVT transmission and hydraulic pressure sensor failures in earlier Ascent vehicles using the same drivetrain. My March 2020 vehicle appears to have experienced the same failure pattern. Despite the documented component failure and extensive wiring contamination, the manufacturer declined to fully cover the repair. I request that NHTSA review this failure mode to determine whether hydraulic pressure sensor seal failures allowing transmission fluid to migrate into wiring harness systems represent a broader defect affecting Subaru Ascent vehicles.
- Engine · Power train
Oil Leak(s) (found cam carriers leaking, front timing cover leaking, oil cooler leaking, upper and lower oil pan leaking. recommend engine reseal). Massive oil leaks found in car due to RTV sealant. Subaru uses RTV silicone sealant (formed-in-place gaskets) instead of traditional rubber gaskets…
Oil Leak(s) (found cam carriers leaking, front timing cover leaking, oil cooler leaking, upper and lower oil pan leaking. recommend engine reseal). Massive oil leaks found in car due to RTV sealant. Subaru uses RTV silicone sealant (formed-in-place gaskets) instead of traditional rubber gaskets for many sealing surfaces (cam carriers to heads, timing cover, oil pans, etc.). Transmission failure at 37,000miles which needed replacement. In dealership service for 52 days at that time. Transmission symptoms continued after replacement. Car hesitates while accelerating making it dangerous to accelerate to speed needed to merge into traffic. Same transmission symptoms occurring now that were present prior to complete transmission failure in 11/2021 that left me in middle of busy freeway with a disabled car. Subaru not taking transmission symptoms seriously. Continuous brush off from service and Subaru. Car is a lemon. Subaru not standing by product. Oil should not be leaking from every orfice of engine.
- Engine
Car has 82,000 miles, has been maintained and requires an engine replacement due to 'Sludge'. Reading a lot of forums that indicate this is a common situation with this make and model and likely due to manufacturer's defects.
- Lane departure › Assist · Power train · Vehicle speed control
I have had my lane assist come on by its self a few times, which is very dangerous because it seems to take over and will pull on the steering wheel. I’ve also brought my car back to the dealership a handful of times to have it hooked up to a computer and also someone ride with me because the car…
I have had my lane assist come on by its self a few times, which is very dangerous because it seems to take over and will pull on the steering wheel. I’ve also brought my car back to the dealership a handful of times to have it hooked up to a computer and also someone ride with me because the car will either hesitate to accelerate or stutters and doesn’t seem to want to go when I am between 20-30 miles an hour. Other times when I’m at a light or stop sign it hesitates also. I was told there was nothing wrong with it and they reprogrammed to transmission but it didn’t help at all.
- Unknown or other
Although the NHTSA form does not include a transmission category, this complaint concerns a critical transmission-related defect in my 2020 Subaru Ascent, which caused oil migration into the wiring harness and contamination of the Engine Control Module (ECM). This complaint concerns a critical…
Although the NHTSA form does not include a transmission category, this complaint concerns a critical transmission-related defect in my 2020 Subaru Ascent, which caused oil migration into the wiring harness and contamination of the Engine Control Module (ECM). This complaint concerns a critical transmission-related defect in my 2020 Subaru Ascent. The vehicle has been inoperable since June 2025 due to a failure of the transmission secondary pressure sensor. This failure caused oil to migrate into the wiring harness and ultimately contaminated the Engine Control Module (ECM), rendering the vehicle undrivable. Authorized Subaru dealership Huberger Subaru in Colorado Springs documented the following: - Replacement of the transmission secondary pressure sensor - Replacement of the engine wiring harness - Check engine light returned after repair - Confirmed oil contamination of the ECM Despite repeated repairs and part replacements, the vehicle remains out of service for over seven months, with no confirmed timeline for resolution. Subaru of America has not provided meaningful updates or a clear repair plan, and corporate representatives have failed to respond to emails and phone calls. The extended downtime and lack of repair constitute a safety concern, as the vehicle could fail while in use under certain conditions. Additionally, $400 was improperly withdrawn from my account in July 2025 for rental reimbursement during the warranty repair period and has not been refunded. I am seeking prompt resolution, including repair or replacement of the vehicle, reimbursement for the rental charge, and any appropriate actions from Subaru to address this safety-related defect.
- Power train
Replaced front multi plate transfer clutch at 96,987 miles.
- Unknown or other
i purchased this vehicle from Northwest Chevrolet in McKenna, Wa on [XXX] and they did not disclose to me that there were open recalls prior to my purchase. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Power train
The CVT transmission has failed and been replaced three times despite proper maintenance. Subaru has replaced the transmission multiple times under warranty, but the failure continues to recur. •First CVT replacement at 50,542 miles •Second CVT replacement at 88,175 miles •Third CVT…
The CVT transmission has failed and been replaced three times despite proper maintenance. Subaru has replaced the transmission multiple times under warranty, but the failure continues to recur. •First CVT replacement at 50,542 miles •Second CVT replacement at 88,175 miles •Third CVT replacement at 92,832 miles This shows repeat failure, not wear-and-tear. It is a safety risk: The vehicle hesitates and loses power intermittently, which creates a safety risk when accelerating or merging into traffic. The most recent replacement is incorrectly listed as pan replacement.
- Unknown or other
Vehicle: 2020 Subaru Ascent Issue: Cold weather software glitch If you are operating an Ascent or possibly other Subarus with the CVT in temperatures below -20F be certain to have either a small wrench or the appropriate size socket to loosen the ground clamp on the battery ground cable with you…
Vehicle: 2020 Subaru Ascent Issue: Cold weather software glitch If you are operating an Ascent or possibly other Subarus with the CVT in temperatures below -20F be certain to have either a small wrench or the appropriate size socket to loosen the ground clamp on the battery ground cable with you so you can employ what I call the magic Windows fix wherin one completely de-powers the system and reboots it. With all the ridiculous interconnections, if the CVT temperature sensor thinks the tranny is too cold the cars operating system looses it mind and goes completely bonkers. Subaru obviously did no cold weather testing. We have had 2 failures in cold weather. It only happens at temperatures well below the-20F range. The first case happened last year while driving after being stopped for a couple of hours. Everything seemed normal and then suddenly several warning lights came on and all of the safety systems and the eyesight system shut down. The car ran and drove, but none of the associated systems would work. No traction control. No cruise control. Several other systems. The only solution was to disconnect the battery and get this rolling computer to reboot. This was a temporary fix as the condition repeated itself although the car was driveable but with none of the safety systems operational. This year we were out in cold weather, -25 to -32. We went to a place to have lunch and when I went to restart the car the app failed to do so. So I put on all my gear and went out to start it manually. It would not start and all the warning lights were on and the radiator fan was running full tilt at -25F with the car off. I tried twice to get it going by pulling the battery cable to get it to reboot. Evidently when this happens you must leave the battery disconnected long enough (about 5 minutes) for all the capacitors in the electronics to drain. Once restarted, the car drove normally but we did not shut it down for any reason for the rest of the day.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010932"This bulletin announces availability of new reprogramming files developed to address the two symptoms described below: SYMPTOM 1: A jerk or judder sensation felt from the powertrain during braking with the air conditioning on. SYPMTOM 2: A shudder is felt from the powertrain along with a screeching type of sound. NOTE: Both of these symptoms are not related with a fault code."
- 11010931In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Warranty coverage for the front brake on 2019-24 model year Ascent models to 8 years (96 months) or 150,000 miles (whichever comes first) to address cases of front brake pulsation or squealing.
- 11010928This bulletin announces a design change made to the second row inner seat belt buckle assembly to address cases of the seat belt indicator warnings not turning off after the buckle is fully latched.
- 11010925This annocement is to inform dealers to the Gen 3.1 Head Unit OTA will be available via Wi-Fi. The update will take place in multiple batches with the first beginneing November 15th and the last being Decemeber 3rd. This update is for approximatelt 714,000 VINs.
- 11010919The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units utilized in the models as listed.
- 11010910This bulletin provides guidance when diagnosing chain slip, judder, shudder, and hesitation concerns on the TR690 model CVT transmissions used in the models listed.
- 11010905This bulletin announces the initialization service procedures to be followed when diagnosing and/or repairing Power Rear Gate (PRG) systems.
- 11009701This bulletin details an important regulation issued by the National Highway Traffic Safety Administration (NHTSA) which impacts the way some vehicles with accessories are sold. This regulation applies to any automobile retailer installing accessories on a vehicle prior to its first sale.
- 11009699This bulletin announces availability of new reprogramming files developed to address symptoms which a jerk or judder sensation can be felt from the powertrain during braking with air conditioning on, or a shudder felt from the powertrain along with a screeching type of sound.
- 11009694This bulletin provides guidance when diagnosing chain slip, judder, shudder, and hesitation concerns on the TR690 model CVT transmissions used in the models listed.
- 11009690Subaru of America, Inc. has announced a warranty extension to the front brakes which will address concerns related to squeak and or judder noises. This is related to Ascent vehicles manufactured prior to January 11th, 2024.
- 11009685This bulletin contains additional information for recommended materials listed in the Service Manuals for individual models.
- 11008283This Service Information Bulletin announces the preferred practices to be used when handling vehicles equipped with Gen2 Telematics which are enrolled in the Subaru STARLINK Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer.
- 11008282This bulletin contains additional information for recommended materials listed in the Service Manuals for individual models.
- 11008281This Service Information Bulletin announces the diagnostic procedures to be followed when diagnosing engine oil leakage on FA and FB type engines.
- 11008280This Service Information bulletin is being released as guidance for proper testing and charging of vehicle batteries.
- 11008279This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure.
- 11008278In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Warranty coverage for the front brake on 2019-24 model year Ascent models to 8 years (96 months) or 150,000 miles (whichever comes first) to address cases of front brake pulsation or squealing.
- 11008276The CP1.5 RCs OTA is available for all mid and high grade CP1.5 head units.
- 11008275"In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the Warranty coverage time period for the fuel pump impeller to 15 years."
- 11008273Denso low pressure fuel pump warranty extension.
- 11008270This bulletin announces the design change made to the rear gate glass, it is intended to address cases of rust build up along the edge of the rear gate opening of the rear quarter panel.
- 11008267This bulletin announces availability of the NEW genuine Subaru engine oil filter.
- 11008259This bulletin outlines the judgment criteria to be used when inspecting front transverse link bushings to reduce unnecessary bushing replacement.
- 11006935This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure for 2025MY vehicles.
- 11006934The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
- 11006932This Service Information Bulletin announces important diagnostic information to utilize when the Data Communication Module (DCM) is being tested as a dark current/standby current source.
- 11006931This Bulletin provides additional diagnostics to follow when addressing a Telematics-related DTC B2A16.
- 11006930This bulletin provides information on a new reprogramming procedure (FOTA) to optimize the Harman Gen 3.1 Audio and Navigation head units (H/U) utilized in the models as listed.
- 11005630This announcement provides information on a warranty extension for Ascent front brake judder/squeak on certain 2019 to 2024 model year vehicles manufactured prior to January 11th 2024.
- 11005627This bulletin is in the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Warranty coverage for the front brake on 2019-24 model year Ascent models to 8 years (96 months) or 150,000 miles (whichever comes first).
- 11005624This annoucement provides parts personnel information about remanufactured transmissions that will no longer be available.
- 11005617This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers).
- 11005615This announcement provides information for retailers to install the latest infotainment system software for Denso CP 1.5.
- 11005614This bulletin announces important diagnostic information to utilize when testing the Data Communication Module (DCM) as a dark current/standby current source. All models equipped with Telematics except Solterra.
- 11005609This announcement provides information on Takata Recall Escalated Towing Program.
- 11005608This thermo control valve video contains information on the replacement of thermo control valve.
- 11005605This bulletin addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units utilized in the models as listed.
- 11005599This Bulletin provides SOA paint codes to help eliminate possible confusion for 2025 MY vehicles.
- 11005595This bulletin contains additional information for recommended materials listed in the Service Manuals for individual models.
Every Subaru Ascent model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.