1989 Thomas School Bus
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Thomas › School Bus › 1989
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1989 Thomas School Bus. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
9 recalls name the 1989 Thomas School Bus. Newest first.
The door hinges were not shielded and can snag exiting children's clothing or accessories.
When a passenger's clothing becomes caught in the handrail, and the bus driver closes the door and puts the vehicle in motion, the individual IS subject to being dragged by the bus. This can result in serious injury or death.
Dealers will install hinge pads to prevent the snagging of passenger's clothing.
Passenger's clothing can unknowingly become caught in the handrails at bus doors when exiting the bus.
When a passenger's clothing becomes caught in the handrail, and the bus driver closes the door and puts the vehicle in motion,the individual IS subject to being dragged by the bus. This can result inserious injury or death.
Replace or reposition the handrails to stop clothing from being caught.
Passengers clothing can unknowingly become caught in the handrails at bus doors when exiting the bus.
When a passenger's clothing becomes caught in thehandrail, and the bus driver closes the door and puts the vehicle in motion, theindividual IS subject to being dragged by the bus. This can result in seriousinjury or death.
Replace or reposition the handrails to stop clothing from becoming caught.
The center actuator that releases two catches via two pull rods can become non-functional from poor or improper maintenance, lack of lubrication, corrosion, or a combination all three causes.
When the center actuator IS non-functional, the windowis very difficult to open, and would not function as an emergency exit in caseof a vehicular accident.
Remove the old center actuator and install an improved actuator.
Release handle for rear push out window IS not located in area required by s5.2.3.1(b) of fmvss 217.
Buses would not comply with standards; in an emergency,exit from the push-out window could be hampered.
Install new interior handle assembly to meet specifications.
The fuel shut-off solenoid in the cummins 6C engine may be faulty, causing spontaneous interruption of fuel flow to the engine during normal operation. This results in loss of power to driving wheels, power steering, and other power assisted operating systems.
Loss of engine power and secondary loss of power assistedsystems reduces steering control, braking ability, visual systems and otherpower assisted operating systems, resulting in increased risk of vehicleaccident.
Where necessary, replace the solenoid spring, adjust solenoid, replace wires, and verify maximum power requirements to the solenoid.
The seat do not comply with energy absorption requirements of fmvss 222.
The rear facing seats had only one third of the requiredenergy absorption; a passenger using this seat could be injured in a sudden stopor an accident.
Install new foldup seats with appropriate fasteners.
Upper anchorage of type 2 safety belt installed at the driver's seating position IS not within the specified range as required by fmvss 210.
Belts may be uncomfortable and obstruct vision to the left; buses would not comply with standard.
Install reinforcing channel assuring that belts are within specified range.
The adjustable seat back structure and tilt mechanism may not withstand rearward force required by fmvss 207.
Buses are not in compliance with fmvss 207; seatbackcould fail in an accident increasing potential for injury to occupant.
Install new seat back structure and tilt mechanism assembly that complies with standard.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
There is no summary currently available
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.