1992 Thomas School Bus
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Thomas › School Bus › 1992
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1992 Thomas School Bus. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
10 recalls name the 1992 Thomas School Bus. Newest first.
The door hinges were not shielded and can snag exiting children's clothing or accessories.
When a passenger's clothing becomes caught in the handrail, and the bus driver closes the door and puts the vehicle in motion, the individual IS subject to being dragged by the bus. This can result in serious injury or death.
Dealers will install hinge pads to prevent the snagging of passenger's clothing.
The fasteners used to secure the mounting foot of either forward or rearward handrails could be installed in such a manner as to allow the possibility that the nut used in nhtsa's handrail inspection procedure will catch between the fasteners.
A passenger's clothing could become caught in the handrail, and if the bus driver closes the door and puts the vehicle in motion, the individual IS subject to being dragged by the bus. This can result inserious injury or death.
Replace or reposition the handrails to stop clothing from becoming caught.
Passenger's clothing can unknowingly become caught in the handrails at bus doors when exiting the bus.
When a passenger's clothing becomes caught in the handrail, and the bus driver closes the door and puts the vehicle in motion,the individual IS subject to being dragged by the bus. This can result inserious injury or death.
Replace or reposition the handrails to stop clothing from being caught.
A decal warning of the potential danger in using starting fluid to start the engine was omitted.
Ignition of the starter fluid by the heating element can result in an explosion causing engine damage and personal injury.
Customers will be sent warning decals and installation instructions.
Passengers clothing can unknowingly become caught in the handrails at bus doors when exiting the bus.
When a passenger's clothing becomes caught in thehandrail, and the bus driver closes the door and puts the vehicle in motion, theindividual IS subject to being dragged by the bus. This can result in seriousinjury or death.
Replace or reposition the handrails to stop clothing from becoming caught.
The safety belt anchorage bolts do not comply with the requirements of fmvss 210, "seat belt assembly anchorages". The seat anchorages could not maintain load of 5,000 lbs for 10 seconds.
The safety belts might not adequately protect seatoccupants in the event of a sudden stop or accident.
Replace the anchorage bolts with bolts of a larger diameter, which meet the load requirements of fmvss 210.
The current production stationary window assemblies allow the glass to disengage from the rubber and/or frame.
The windows do not comply with fmvss 217, "bus windowretention and release."
Install two retaining clips at each non-complying window.
Incorrect screws were used to attach the plywood seat back to the seat frame.
The driver's seat back does not meet the strengthrequirements of fmvss 207, "seating system". Should the seat back fail whilethe bus IS in motion, the operator could lose control of the bus.
Remove incorrect screws attaching the plywood back to the seat frame and install proper screws.
A brake air line plumbing error causes the spring brakes to be applied without brake application when the air pressure in the primary tank drops to a level which automatically activates the spring brake system.
Activation of the spring brake system without operatorbrake application will cause the spring brake to be applied, locking the brakeswithout any warning to the operator.
Replace and reroute air brake hose to comply with fmvss 121.
The center actuator that releases two catches via two pull rods can become non-functional from poor or improper maintenance, lack of lubrication, corrosion, or a combination all three causes.
When the center actuator IS non-functional, the windowis very difficult to open, and would not function as an emergency exit in caseof a vehicular accident.
Remove the old center actuator and install an improved actuator.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
There is no summary currently available
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.