2020 Toyota C-HR

Recalls

1 recall names the 2020 Toyota C-HR. Newest first.

• Seat belts › Rear/other

  Dec 11, 2019NHTSA 19V8770009,468 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 C-HR and 2020 Corolla and Corolla Hybrid vehicles equipped with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.

  Risk and remedy

  Risk

  In the event of a crash involving multiple impacts, the seat belt may not properly restrain the occupant, increasing the risk of injury.

  Remedy

  Toyota will notify owners, and dealers will inspect the rear seat belt assembly production dates, and replace the assemblies, as necessary, free of charge. The recall began February 7, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 19TB22 and 19TA22.

  Full recall details →

Owner complaints

What owners report most

1. Power train51
2. Unknown or other6
3. Electrical system5
4. Engine5
5. Vehicle speed control4
6. Steering3
7. Tires3
8. Wheels2
9. Seat belts2
10. Service brakes2

Latest complaints

• Oct 24, 2026AR
  Power train
  I am reporting a transmission failure involving my 2020 Toyota C-HR Limited at approximately 111,852 miles. For several weeks, I had noticed an unusual humming or dragging noise coming from the front driver’s side of my vehicle while driving. The noise became increasingly noticeable, but I did not…

  I am reporting a transmission failure involving my 2020 Toyota C-HR Limited at approximately 111,852 miles. For several weeks, I had noticed an unusual humming or dragging noise coming from the front driver’s side of my vehicle while driving. The noise became increasingly noticeable, but I did not know what was causing it. On October 8, 2026, after driving approximately 30 miles at highway speeds of around 75 mph, I arrived home and began backing into my driveway. While the vehicle was moving in reverse, it suddenly made a noticeable clunk and jerk. This was the first and only time I had experienced the vehicle jerking. I took my vehicle to an authorized Toyota dealership on October 9, 2026. The dealership recommended replacing the transmission assembly. I was verbally informed that an internal transmission bearing had failed. Throughout the weeks leading up to the diagnosis, my vehicle never displayed a check engine light, transmission warning, or any other dashboard warning message. I regularly drive approximately 60 miles per day, including interstate travel. I am concerned that an unexpected transmission failure while driving at highway speeds could cause a loss of propulsion or leave the vehicle disabled in traffic, potentially putting myself and other motorists at risk. Although I have not experienced a complete loss of propulsion, the worsening noise, sudden clunk and jerk while reversing, and dealership’s recommendation to replace the transmission have raised concerns about the vehicle’s continued safe operation. I am requesting that NHTSA document and evaluate this transmission failure to determine whether it may represent a potential safety defect affecting Toyota C-HR vehicles.

• Oct 7, 2026NC
  Power train · Unknown or other

  Fred Anderson Toyota dealership said a bearing which is internal is going bad The manufacturer does not sell the kit as my transmission is called a CVT and it’s a sealed transmission. I will need to replace the entire transmission. Also my vehicle is also discontinued.

• Sep 29, 2026TX
  Power train

  Transmission is going out. It is sitting at the Toyota dealership in silsbee Texas. It has been recalled in Canada but not the US . IT HAS WELL KNOWN PROBLEMS AND THERE IS A CLASS ACTION LAWSUIT. It is unsafe for me to drive and others on the road way. Toyota will not replace it. Said it was out of warranty only having 133k miles on it

• Sep 25, 2026NC
  Power train
  The vehicle is exhibiting symptoms of the widely documented internal differential/output bearing failure associated with the Toyota K114 CVT transmission. When coasting—even with the engine completely turned off—and during mechanical rotation of the front wheels, there is abnormal metallic…

  The vehicle is exhibiting symptoms of the widely documented internal differential/output bearing failure associated with the Toyota K114 CVT transmission. When coasting—even with the engine completely turned off—and during mechanical rotation of the front wheels, there is abnormal metallic clicking, clacking, and mechanical play apparently emanating directly from the center of the transaxle housing. This internal component degradation poses a potential safety hazard. A catastrophic failure of this bearing could lead to severe metallic debris entering the sealed CVT system, potentially resulting in drivetrain lock-up or an instantaneous loss of motive power at highway speeds, creating a serious risk of a high-speed collision. This is a documented recurring failure in the K114-equipped C-HR. Toyota Canada has acknowledged this mechanical failure in 2018–2019 C-HR vehicles by issuing a 10-year/193,000 km Warranty Enhancement Program covering CVT failures associated with internal bearing failure. Similar failures have also been documented in U.S. C-HR vehicles, including 2020 model-year vehicles, although no equivalent U.S. warranty enhancement has been extended to those vehicles. Despite the vehicle having approximately 136,000 miles, this component would reasonably be expected to provide substantially greater service life. The vehicle has been maintained appropriately. Its premature failure is therefore potentially indicative of a systemic defect affecting the K114 transmission and warrants investigation by the National Highway Traffic Safety Administration and consideration of whether a safety-related defect investigation or appropriate corrective action is warranted.

• Sep 9, 2026NY
  Power train

  CVT failing, causing extreme bearing noise. Toyota insisted lifetime fluids with no transmission service or fluid changes. At 147000 miles it is noisy with no warning lights and no recommended service.

• Sep 7, 2026UT
  Power train

  Transmission went out 3,400 miles past the 60k warranty. Vehicle taken in at 59k miles and told there were no issues. Filed good will warranty claim. Toyota needs to do a recall. This is a know problem. 2018 and 2019 models recalled. 2020 models same issue, why no recall for 2020. I have read at least 17% of 2020’s have already failed.

• Aug 31, 2026IL
  Power train

  Transmission making winding noise, took into toyota told will need full transmission replacement. Said could just go out at anytime. 2020 with 75700 miles on car.

• Aug 28, 2026TX
  Power train
  Transmission – Loss of Power / Jerking / Safety Hazard The vehicle is experiencing a serious issue with the K113 CVT transmission. The transmission produces abnormal noise and can jerk and lose power, creating a potentially hazardous condition, particularly when accelerating to overtake another…

  Transmission – Loss of Power / Jerking / Safety Hazard The vehicle is experiencing a serious issue with the K113 CVT transmission. The transmission produces abnormal noise and can jerk and lose power, creating a potentially hazardous condition, particularly when accelerating to overtake another vehicle or when merging onto a freeway. A sudden loss of power in these situations can significantly increase the risk of a collision. The vehicle has been properly maintained and driven normally. The transmission issue appears consistent with a known problem reported with this CVT/transmission design. I am concerned that the underlying manufacturing/design issue may cause premature transmission failure and create an unsafe driving condition. The vehicle currently has approximately 107,000 miles. Despite the issue, the vehicle may continue to operate and shift, making the problem difficult to identify until the transmission is under load or has been driven for some time. I am requesting that NHTSA investigate this transmission issue and determine whether a safety defect or manufacturing/design defect exists and whether additional action by the manufacturer is warranted.

• Aug 17, 2026TX
  Power train
  CVT bearing disintegrating. Expected repair cost is $10k-$12k. Purchased about a year ago and still owe almost 20k on the loan. This is the car that was intended to be used by my daughter but cannot trust this to make the drive. There have been no warning lamps or system messages just a metal…

  CVT bearing disintegrating. Expected repair cost is $10k-$12k. Purchased about a year ago and still owe almost 20k on the loan. This is the car that was intended to be used by my daughter but cannot trust this to make the drive. There have been no warning lamps or system messages just a metal on metal grinding sound. This is a known issue with this model of vehicle and there is already a warranty enhancement for this issue on 2018 and 2019 models. Mine is a 2020 so they clearly did not fix this known issue. This started about a month ago as a slight high pitched whine and has quickly progressed to the point that we cannot use the vehicle.

• Aug 14, 2026IA81,321 mi
  Power train
  The contact owns a 2020 Toyota C-HR. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the engine compartment. No warning lights were illuminated. The vehicle was taken to a dealer where it was diagnosed and determined that the transmission belt…

  The contact owns a 2020 Toyota C-HR. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the engine compartment. No warning lights were illuminated. The vehicle was taken to a dealer where it was diagnosed and determined that the transmission belt needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 81,321.

• Aug 13, 2026WA
  Engine · Vehicle speed control
  While driving, my 2020 Toyota C-HR suddenly lost acceleration in the middle of the road, with the vehicle failing to respond to throttle input. This has now happened twice. There was no warning noise (no whining or grinding) beforehand, and the loss of power occurred without warning while the…

  While driving, my 2020 Toyota C-HR suddenly lost acceleration in the middle of the road, with the vehicle failing to respond to throttle input. This has now happened twice. There was no warning noise (no whining or grinding) beforehand, and the loss of power occurred without warning while the vehicle was in motion, creating a dangerous driving condition due to inability to maintain speed or safely merge/clear traffic.

• Jul 23, 2026CA
  Power train
  I have a K114 CVT internal bearing defect. It is available for inspection upon request. Transmission issues are unsafe because it can cause sudden loss of acceleration, unexpected vehicle stalling in traffic, and delayed shifting or gear slippage. These sudden changes make my car behave…

  I have a K114 CVT internal bearing defect. It is available for inspection upon request. Transmission issues are unsafe because it can cause sudden loss of acceleration, unexpected vehicle stalling in traffic, and delayed shifting or gear slippage. These sudden changes make my car behave unpredictably; risking rear-end collisions or loss of control. This puts myself, my passengers, and others at risk. I am unsure if the problem been reproduced or confirmed by a dealer or independent service center. The vehicle and/or component have not been inspected by the manufacturer, police, insurance representatives or others. However, the vehicle received Service in December 2025 for a transmission fluid replacement for maintenance and no issues were reported at the time. There were not any warning lamps, messages or other symptoms of the problem prior to the failure. The issues first appeared in mid-June, around June 15, 2026, where I could hear a grinding noise when I drove. On July 1, I was driving home and experienced stalling while turning right at a stoplight. I took the car in for a diagnostic inquiry on 7/18/2026 and was notified I had a transmission issue. I took it for a second opinion, where it was confirmed it was transmission. I took it to Toyota and on 7/22/2026, they confirmed it was transmission issues requiring a full replacement with no financial assistance citing my warranty has ended and my service history is not thorough enough. Toyota has already extended the warranty for Canadian drivers due to this exact safety hazard.

• Jul 14, 2026NJ
  Power train

  Had the car brand new since 2020 just started to hear noises took it to the dealership and they said the transmission needs to be replaced

• Jun 30, 2026CA
  Power train

  Transmission bearing is going out. I hear a whine noise while driving. And took it to a Transmission shop and was told the Transmission bearing goes out alot on these types vehicle. And i just bought this car used 1 month ago.

• Jun 26, 2026FL
  Power train
  My 2020 Toyota C-HR is exhibiting clear, escalating symptoms of the known K114 CVT internal bearing defect, creating an active safety hazard while driving. The transmission has not failed completely yet, but it regularly experiences high-pitched whining noise, sudden hesitation during acceleration…

  My 2020 Toyota C-HR is exhibiting clear, escalating symptoms of the known K114 CVT internal bearing defect, creating an active safety hazard while driving. The transmission has not failed completely yet, but it regularly experiences high-pitched whining noise, sudden hesitation during acceleration, and loud grinding-like noise which gets louder and faster as I speed up. This behavior creates a significant safety risk because the vehicle unexpectedly fails to accelerate when merging onto the highway / hesitates unpredictably at busy intersections, exposing me to the risk of a rear-end collision. The car is less than 6 years old, and a mechanic/dealership has diagnosed it as an impending internal bearing failure. Toyota Canada has already acknowledged this exact flaw by extending the CVT warranty to 10 years. However, Toyota USA refuses to act, forcing American drivers to choose between operating an increasingly unpredictable, unsafe vehicle or paying $10,000+ out of pocket to replace a component with a known manufacturing defect. I am filing this to urge the NHTSA to investigate before this transmission suffers a complete, dangerous failure at highway speeds.

• Jun 11, 2026TX
  Power train
  I purchased my Toyota CHR 2020 LE right off the lot in 2020. In 2023, I had to replace my first transmission, THANK GOD THAT ONE WAS UNDER WARRANT. It is now 2026 and I am again, having to replace my transmission. This is a real safety concern. Just in the beginning stage of failure my car is…

  I purchased my Toyota CHR 2020 LE right off the lot in 2020. In 2023, I had to replace my first transmission, THANK GOD THAT ONE WAS UNDER WARRANT. It is now 2026 and I am again, having to replace my transmission. This is a real safety concern. Just in the beginning stage of failure my car is sluggish to accelerate and I live in Houston, TX! People will run you over here if you aren't careful. No to mention the highway robbery that is being committed for having to pay half the cost of my car for a new transmission that is absolute garbage. It is absolutely ridiculous that no one has done anything about this yet. You sell a vehicle you know is having these issues without disclosing them. Shame on everyone involved.

• Jun 10, 2026IN
  Power train

  Started hearing a whining noise shortly after buying this car and found out it is an internal bearing failure inside the CVT transmission that is widely known in these vehicles to fail but there has been no recalls to correct the problem and could cost me money I don't have to get it fixed.

• Jun 2, 2026CA
  Power train

  Transmission failure, sounds like there is a rattle inside of the transmission.

• May 18, 2026CA
  Electrical system · Engine · Power train
  The motor mounts broke when it hit a pothole and that snapped the wiring harness which caused the transmission to shift. Toyota dealership says it needs a new CVT transmission replacement. The engine has shifting issues. My insurance adjusters believe that the transmission failure is due to wear…

  The motor mounts broke when it hit a pothole and that snapped the wiring harness which caused the transmission to shift. Toyota dealership says it needs a new CVT transmission replacement. The engine has shifting issues. My insurance adjusters believe that the transmission failure is due to wear and tear, but the car did not have issues before the pothole. There were and are no warning lights or messages prior to and after the incident. I got the engine wiring harness and motor mounts fixed and there was still a noise and lag while accelerating and they finally said it was the transmission the second time I brought it in and that wasn’t covered by insurance. I’ve only put 11,000 miles on it and I’m the second owner. I bought it from a Lithia Nissan of Clovis.

• May 14, 2026FL
  Service brakes
  TO: CarMax Corporate Relations Attn: Jennifer Sheppard, AVP Customer Service Excellence 12800 Tuckahoe Creek Parkway Richmond, VA 23238 [XXX] National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation 1200 New Jersey Avenue, SE Washington, DC 20590 RE: Vehicle: 2020…

  TO: CarMax Corporate Relations Attn: Jennifer Sheppard, AVP Customer Service Excellence 12800 Tuckahoe Creek Parkway Richmond, VA 23238 [XXX] National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation 1200 New Jersey Avenue, SE Washington, DC 20590 RE: Vehicle: 2020 Toyota C-HR 4D Sport Utility VIN: [XXX] Subject: Formal Safety Complaint, Inspection Failure, and Demand for Buyback To the Representatives of CarMax Corporate and NHTSA, I am writing to formally report a severe safety incident and a gross failure of the CarMax Certified Quality Inspection process. The negligence displayed by the CarMax Orlando staff not only violated the terms of our purchase contract but actively endangered my life and the lives of others on the road. 1. Timeline of Events and Staff Negligence On 04/30/2026, I purchased the above-referenced vehicle from CarMax Orlando. Upon attempting a test drive, I was denied by sales consultant Boris Iniquez, who stated the vehicle could not be driven until it was cleaned. On 05/01/2026, I took delivery and immediately noticed the brakes were non-responsive and emitting a loud "air brake" sound. I returned to the dealership on 05/02/2026. Mr. Iniquez performed a ride-along, personally witnessed the brake malfunction, and was informed of my immediate need to drive 450 miles to Atlanta, GA, for my role as a Site Inspector. Rather than providing a safe loaner or grounded vehicle, Mr. Iniquez and the acting manager explicitly instructed me to drive the vehicle to Atlanta, asserting that the car had "passed all inspections." 2. Mechanical Safety Failure Upon reaching Atlanta, the vehicle's condition became untenable. On 05/07/2026, CarMax GA inspected the vehicle and found: - Total failure of all four brake pads. - Front rotors requiring immediate replacement. It is mathematically and mechanically impossible for a vehicle with metal-on-metal rotors and failing pads to have passed a legitimate 125+ INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (F

• May 12, 2026TX
  Power train

  Transmission bearing failure. Whining noise started about 2 months ago and continually got worse before complete transmission failure.

• Apr 28, 2026MD
  Unknown or other

  My transmission is whining and the mechanic shop is stating that I need a new transmission. A common issue they are seeing within vehicles with the CVT transmission

• Apr 23, 2026FL1 injury
  Engine · Power train · Vehicle speed control
  While taking off in my 2020 Toyota C-HR on the highway, the CVT transmission suddenly failed, resulting in an immediate and significant loss of propulsion power. The vehicle did not fully shut off but lost the ability to maintain normal highway speed, requiring me to rapidly reduce speed and…

  While taking off in my 2020 Toyota C-HR on the highway, the CVT transmission suddenly failed, resulting in an immediate and significant loss of propulsion power. The vehicle did not fully shut off but lost the ability to maintain normal highway speed, requiring me to rapidly reduce speed and carefully maneuver the vehicle to safety in active traffic conditions. This created a serious safety risk due to unexpected loss of acceleration and potential inability to maintain highway speed in traffic. The failure occurred at approximately 117,700 miles and shortly after purchase. The vehicle had a documented history of regular maintenance performed at Toyota dealerships approximately every 3,000 miles. I was later informed by Toyota service personnel that the vehicle had previously been documented on 2/2/26 in the manufacturer’s internal system with a CVT fault and a recommendation for transmission replacement prior to my purchase, which was not disclosed in any public vehicle history reporting system. This raises a major safety concern that the transmission failure may be part of a broader pattern of CVT reliability issues affecting this model and drivetrain family. I am submitting this complaint due to the sudden loss of propulsion at highway speed, which presents a potential safety hazard to drivers and surrounding traffic. And deceptive practices of undisclosed known safety issues by Toyota of USA.

• Apr 13, 2026OK76,000 mi
  Power train › Automatic transmission › Internal › Cvt
  The contact's customer owns a 2020 Toyota C-HR. The contact stated that while driving at various speeds, there was a grinding and whining sounds coming from the transmission. The contact diagnosed the vehicle and determined that the CVT transmission was failing and needed to be replaced. The…

  The contact's customer owns a 2020 Toyota C-HR. The contact stated that while driving at various speeds, there was a grinding and whining sounds coming from the transmission. The contact diagnosed the vehicle and determined that the CVT transmission was failing and needed to be replaced. The vehicle was not repaired. The manufacturer and local dealer were notified of the failure, but no assistance was offered. The failure mileage was 76,000.

• Apr 1, 2026NC
  Unknown or other

  CVT Transmission failure

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10252259TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10244111TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10230376TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
• 10230360TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system
• 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220154TT: To improve customer support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
• 10214347TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns
• 10213897TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs
• 10210373TT: When customers have a concern about a discharged battery, no start, or general battery concern, the DCA-8000 is the only appropriate tool to use for diagnosis
• 10210365TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns
• 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10207958TT: Some customers may experience the inability to activate Remote Connect or Remote Connect becoming inoperative when attempting to send commands to the vehicle. To simplify the diagnosis of this system and prevent the unnecessary replacement of parts, please refer to the procedure below.
• 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
• 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
• 10202452TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
• 10201400TSB: Some 2006 ? 2022 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
• 10198150Updates to the 2014-2021 toyota universal flat rate manual

Every Toyota C-HR model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.