2014 Toyota Prius C

Owner complaints

What owners report most

1. Service brakes9
2. Unknown or other8
3. Engine7
4. Electrical system6
5. Vehicle speed control4
6. Air bags3
7. Exterior lighting3
8. Steering3
9. Wheels3
10. Structure2

Latest complaints

• Oct 14, 2026AL
  Service brakes
  The brakes failed while driving at a high speed (55 MPH) on the highway along with failing when braking at a low speed (15 MPH) near a major intersection. This occured with no warning other than the Brake, ABS, and Traction Control appearing as the failure was occuring. The warning light when away…

  The brakes failed while driving at a high speed (55 MPH) on the highway along with failing when braking at a low speed (15 MPH) near a major intersection. This occured with no warning other than the Brake, ABS, and Traction Control appearing as the failure was occuring. The warning light when away after the first occurance and the brakes began working again within a few moments. It then reoccured and the lights did not turn off and the car began beeping. My safety, along with my passengers safety and the safety of those who were in the area was put at risk. The highway failure occured in a high traffic area which was also a construction zone so workers were at risk. It has been confirmed by an independent service center that the Power Brake Booster and Brake Master Cylinder Assembly failed. There were no sypmtoms or warning prior to this dangerous failure. After researching this issue, I have found that this is a common issue but no recall has been issued, only a Customer Support Program Bulletin, of which I never received. This is extremely troubling due to the nature of brake failure at both high and low speeds can put not only the driver at risk but those who are near the vehicle experiencing the brake failure. Repairs are currently in process at the cost of approximatly $3,200.

• Mar 17, 2026CT
  Service brakes

  Brake actuator assembly known issue in Prius C, Toyota refuses to do anything about it. Part is not cheap.

• Nov 21, 2025CA
  Service brakes
  While driving, suddenly all brake lights and warning lights went on, and brakes stopped working normally. It became difficult to brake (brake took a while to engage - had to press pedal to the floor). After diagnostics at the dealership it looks like the brake booster failed. Apparently Toyota knew…

  While driving, suddenly all brake lights and warning lights went on, and brakes stopped working normally. It became difficult to brake (brake took a while to engage - had to press pedal to the floor). After diagnostics at the dealership it looks like the brake booster failed. Apparently Toyota knew about this issue as they did an extended warranty through a Customer Support Program, but unfortunately my issue occurred just past the expiration of that warranty. Since brakes are such a critical component of vehicle safety, if they don't operate well or as expected, it endangers the driver and everyone else on the road. It is wild that Toyota is aware of this issue but that there has been no recall yet.

• Aug 7, 2025OH
  Service brakes
  I was told that my Brake Booster and Brake Booster Pump Assembly needed replaced. I had specifically asked my dealership in the past if there were any issues with my car and was told that there was nothing, which was untrue. I called Toyota and was told that I was mailed something back in 2018, but…

  I was told that my Brake Booster and Brake Booster Pump Assembly needed replaced. I had specifically asked my dealership in the past if there were any issues with my car and was told that there was nothing, which was untrue. I called Toyota and was told that I was mailed something back in 2018, but I do not remember receiving it. Now I am told that this has expired. I wanted to know if I had any recourse or extension time on this program 21 TE01. I am afraid that my brakes will not work, as the lights go off and on. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Jul 14, 2025TX
  Service brakes · Unknown or other · Vehicle speed control

  Cruise Control Not Working. Traction Control Light Active, Brake Light Active, And Light Active The cause was diagnosed by Toyota of Paris. TSB for C1391 Code abnormal leak in accumulator. The corrective action is to replace brake booster assembly with Master cylinder and Brake Booster pump Assembly.

• Jun 17, 2025WA
  Electrical system · Unknown or other
  We were driving on a city street about 25-30mph and the car jerked suddenly and the lights on the dashboard illuminated and the "Check Hybrid System" message came up as well. The car was able to coast to a nearby parking lot. We attempted to drive the car home and the car stalled in the middle of…

  We were driving on a city street about 25-30mph and the car jerked suddenly and the lights on the dashboard illuminated and the "Check Hybrid System" message came up as well. The car was able to coast to a nearby parking lot. We attempted to drive the car home and the car stalled in the middle of the street. We were able to push the car off the road and then get it towed. The presented a potentially very dangerous situation as the car had a complete failure while driving in the middle of the road. The Toyota service department ran a diagnosis which returned DTC P0A94. All of this indicates that the car should be covered under the CUSTOMER CONFIDENCE PROGRAM 23TE03 however that program seems to only cover the 2010-2015 Prius and 2011-2017 Prius V models and not the Prius C. There are several reports of this same issue happening on the Prius C as well though so it doesn't make sense that it is not covered.

• Jun 6, 2025AZ
  Service brakes

  2014 Toyota Prius C with 220k miles. Four warning lights came on while driving. Brakes became not responsive unless you press down very hard. Regenerative braking, went away. The Brake pump can be audibly heard turning on every few seconds.

• May 5, 2025OR
  Unknown or other
  My 2014 Toyota Prius C experienced a complete hybrid inverter failure. The part number of the inverter is the same as the one covered under Toyota’s inverter recalls (such as Recall J0V), yet my VIN is not included. The failure created a serious safety concern, as the vehicle lost power while in…

  My 2014 Toyota Prius C experienced a complete hybrid inverter failure. The part number of the inverter is the same as the one covered under Toyota’s inverter recalls (such as Recall J0V), yet my VIN is not included. The failure created a serious safety concern, as the vehicle lost power while in motion. Toyota’s recall appears to be too limited in scope and may need to be expanded to cover Prius C models that share the same faulty part. I am requesting that NHTSA investigate this issue, as it appears to involve the same hardware defect acknowledged in other Prius models.

• Mar 21, 2025FL
  Unknown or other

  Code C1391 Master cylinder/ break booster

• Aug 20, 2024OH
  Unknown or other

  See attached document for complaint.

• Jul 23, 2024NV
  Unknown or other

  While driving car completely shut off in middle of road. Would not turn back on. Had car towed still will not start.

• May 2, 2024UT170,000 mi
  Exterior lighting › Hazard flashing warning lights · Steering · Wheels
  The contact owns a 2014 Toyota Prius C. The contact stated that while driving at undisclosed speeds and turning from the left lane, the steering wheel popped out. The vehicle was able to reverse however, tires were pushed inward. The vehicle was pushed out of the roadway. There were no warning…

  The contact owns a 2014 Toyota Prius C. The contact stated that while driving at undisclosed speeds and turning from the left lane, the steering wheel popped out. The vehicle was able to reverse however, tires were pushed inward. The vehicle was pushed out of the roadway. There were no warning lights illuminated. The hazard light was inoperable. The vehicle was towed to an independent mechanic. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 170,000. The VIN was not available.

• Feb 9, 2024CA
  Structure › Body · Unknown or other

  Watergets into the body of the car for years since i bought the car i chaged the "body plugs" at the dealer they told me that would fix the problem but whenever it rains floor and trunk fills with water.

• Jun 21, 2023CT73,211 mi
  Engine
  The contact owns a 2014 Toyota Prius C. The contact stated while driving at an undisclosed speed, the vehicle lost motive power. The contact was able to move the vehicle to the shoulder of the roadway safely. The contact stated that before losing motive power, an unknown warning light illuminated.…

  The contact owns a 2014 Toyota Prius C. The contact stated while driving at an undisclosed speed, the vehicle lost motive power. The contact was able to move the vehicle to the shoulder of the roadway safely. The contact stated that before losing motive power, an unknown warning light illuminated. The vehicle was taken to the dealer, but the vehicle was not diagnosed or repaired. The contact stated that the failure had recurred. The manufacturer was not made aware of the failure. The failure mileage was approximately 73,211.

• Nov 21, 2021WA
  Electrical system · Engine · Steering
  While driving, I received a warning "hybrid system malfunction". Within seconds, the vehicle powered off and the steering wheel LOCKED. I had no control of the car and came to an abrupt stop in lane 1 of a two lane road. I was fortunate that it was late in the evening with few cars on the road…

  While driving, I received a warning "hybrid system malfunction". Within seconds, the vehicle powered off and the steering wheel LOCKED. I had no control of the car and came to an abrupt stop in lane 1 of a two lane road. I was fortunate that it was late in the evening with few cars on the road, had I been on the highway during rush hour the outcome, due to loss of power and control (steering), could have been catastrophic and perhaps fatal for me or other commuters. I note that in 2014, Toyota notified NHTSA of a recall to, "rectify software in two of the Prius's electronic control units, one for the motor/generator and the other controlling the hybrid system." Further Toyota said, "In rare circumstances, it could shut down the hybrid system itself, resulting in loss of power and the vehicle coming to a stop". This is exactly what happened to me the other night. Toyota claims, in 2014, that "it has received no reports of accidents or injuries related to the problem." This seems to be an extraordinarily amount of good luck as I could have been easily rear-ended the other night. Curiously, in this NHTSA data base, another owner reported an incident (11439720) on November 8, 2021, that is similar to the experience I had just days prior. And our VINS are eerily close. Coincidence? Not likely. Does the 2014 recall apply to my car and if not, why not given I experienced the exact same symptoms?

• Nov 8, 2021MO
  Electrical system · Engine · Unknown or other

  While driving on the interstate yesterday my Prius computer shut down entirely.

• Sep 9, 2021VT
  Exterior lighting

  The seal of the rear lamp assembly becomes unsealed and lets water in. Burns our bulbs and short out electrical system because of this. Second right rear assembly was replaced today and now front units are also foggy so I know that the seal on the lamp unit is also wearing. I read about this with other Prius and other c models. I had to buy actual Toyota parts as there are no aftermarket units.

• Aug 19, 2021VA
  Power train · Service brakes · Vehicle speed control
  Brake failure / Unintended Acceleration / Unknown cause Driving at approx 25mph on urban street (road in good condition no potholes, ramps, etc) I began to slowly brake as I approached a red traffic light. Instead of braking, the car began to accelerate quickly. I pressed the brake pedal again -…

  Brake failure / Unintended Acceleration / Unknown cause Driving at approx 25mph on urban street (road in good condition no potholes, ramps, etc) I began to slowly brake as I approached a red traffic light. Instead of braking, the car began to accelerate quickly. I pressed the brake pedal again - no response. Pressed down hard for a third time which executed an emergency stop. This all happened within 1 or 2 secs. There were no injuries or involvement of other cars on this occasion. However, had I been any closer to the car in front, I believe I would have rear-ended it. Had this occurred a few moments later, at the busy junction 400m ahead, it could have been fatal. I am absolutely sure it was not driver error. I was not distracted, drive regularly, and have been a confident and safe driver for over 30yrs. I have never experienced this in a car before, and in fact wasn't aware that it could happen until I researched it on this site. No warning lights or indicators came on. The car ran normally for the remaining 2 miles back home. I didn't think anything of it before, but prior to this incident (in our 5 yrs ownership) there were approx. 5 instances when the engine would "roar" as if it wanted to accelerate but didn't when I was breaking or slowing down on a highway. Also, there were perhaps 3 instances when the car felt as though it was "running away" i.e. a slight acceleration - for no obvious reason. As neither of these represented safety issues, I assumed the car was just a bit old and these issues would be addressed as part of any service. Now I wonder if they are related to the sudden acceleration. The car is currently having a "health checks" run, but nothing has been found. I am reluctant to drive this vehicle if neither my dealer or Toyota can discern the problem. Overall we have been happy with this car and its performance, but this is an unacceptable "anomaly" as far as safety is concerned. Vehicle available for inspection.

• Feb 19, 2020CA75,000 mi
  Electrical system · Engine · Vehicle speed control

  I turned on my vehicle and when I switched gears, from park to drive, it did not register that it was in drive. When I tried to drive away, there was no acceleration and lack of power. My battery was operating at almost max capacity.

• Jan 9, 2020TX63,769 miCrash
  Air bags
  My daughter was traveling down 121 by grapevine mills mall. She noticed a driver being aggressive. So she attempted to switch to get away from him. When she was checking to merge to next lane the aggressive driver stopped for no reason. Intentionelly wrecking her car. Then driving off. her…

  My daughter was traveling down 121 by grapevine mills mall. She noticed a driver being aggressive. So she attempted to switch to get away from him. When she was checking to merge to next lane the aggressive driver stopped for no reason. Intentionelly wrecking her car. Then driving off. her vehicle had extensive damage and her air backs never deployed. Her prius c had driver side front end damage. The front driver side fender was ripped from the vehicle.

• Jul 29, 2019AZ68,500 mi
  Engine · Fuel/propulsion system · Power train
  City street ...pressed on gas after the light changed and it did not go forward and then waivered for awhile. I was very close to home. I do not know how it will work tomorrow . No warning lights were on. It has acted funny before like this on highway trips and then it wouldn't do it. Toyota…

  City street ...pressed on gas after the light changed and it did not go forward and then waivered for awhile. I was very close to home. I do not know how it will work tomorrow . No warning lights were on. It has acted funny before like this on highway trips and then it wouldn't do it. Toyota dealers do not even know about them and it IS annoying. It feels like a transmission slipping but has less than 70,000 miles. I thought maybe heat IS doing it but now that it IS out of warranty ie over 5 years old, I do not know what to do. I am unsure what causes this since no lights warn anything IS wrong.

• May 16, 2019FL30,000 miCrash1 injury
  Electronic stability control (esc) · Structure
  TL* the contact owns a 2014 toyota prius c. While driving 45 mph or above, when a large vehicle passed, it would pull the contact's vehicle into its pathway. The contact stated that the failure also occurred in high wind conditions. There were no warning indicators illuminated. The contact had to…

  TL* the contact owns a 2014 toyota prius c. While driving 45 mph or above, when a large vehicle passed, it would pull the contact's vehicle into its pathway. The contact stated that the failure also occurred in high wind conditions. There were no warning indicators illuminated. The contact had to slow down to regain control of the vehicle. The vehicle was not taken to a dealer or independent mechanic for diagnostic testing or repairs. On may 15, 2017, the vehicle was involved in a collision with an 18-wheeler. The contact believed he lost control of the vehicle due to the failure. The air bags did not deploy. The contact suffered pains and sought medical attention a month later. A police report was filed. The cause of the failure was not diagnosed. The body damage to the passenger side of the vehicle was repaired. The manufacturer was notified of the pulling failure and provided case number: 1804052396 in 2018 as well as case number: 1905141699 for the recent failure. The contact was concerned for his safety because the vehicle was rear ended on january 8, 2019, which damaged the chassis and hybrid battery cage. The contact stated that the insurance company repaired the chassis; however, the hybrid battery cage and battery were not replaced. The contact was very concerned that the vehicle could catch fire in the event of a crash. The failure mileage was approximately 30,000.

• Nov 28, 2018WA49,000 mi
  Engine
  TL* the contact owns a 2014 toyota prius c. While driving 35 mph, the vehicle stalled without warning. The vehicle managed to restart after a few attempts and the failure was corrected. The contact was able to drive the vehicle home. A dealer and the manufacturer were not made aware of the failure.…

  TL* the contact owns a 2014 toyota prius c. While driving 35 mph, the vehicle stalled without warning. The vehicle managed to restart after a few attempts and the failure was corrected. The contact was able to drive the vehicle home. A dealer and the manufacturer were not made aware of the failure. The failure mileage was approximately 49,000. *Dt consumer stated dealer ran complete diagnostics and found no faults logged. Consumer will replace inverter. *Jb

• Aug 14, 2018IL65,530 mi
  Service brakes

  While braking the front wheel rolled over a sunken sewer cover causing temporary braking failure and a sliding sensation.

• Jul 27, 2018FL40,000 miCrash1 injury
  Air bags · Seat belts
  TL* the contact owned a 2014 toyota prius c. While driving approximately 30 mph, the front driver side of the contact's vehicle was struck by another vehicle. The side and front driver side air bags deployed, but neither stopped the driver from making contact with the windshield. In addition, the…

  TL* the contact owned a 2014 toyota prius c. While driving approximately 30 mph, the front driver side of the contact's vehicle was struck by another vehicle. The side and front driver side air bags deployed, but neither stopped the driver from making contact with the windshield. In addition, the seat belt did not restrain the driver. A police report was filed. The contact sustained facial lacerations, contusions to the left arm, shoulder, and hip, and severe headaches the required medical attention. The vehicle was towed to a tow lot and deemed a total loss by the insurance company. The vehicle was not taken to the dealer to determine the cause of the failures. The manufacturer was not notified of the failures. The approximate failure mileage was 40,000.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Pedestrian alert sounds

  DP22005Opened Jan 27, 2023Closed Aug 7, 2023Recall 22V063000
  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…

  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
• 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
• 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
• 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
• 10213902TSB: This bulletin includes basic procedures for performing a rescue charge on Ni-MH high voltage (HV) batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing a rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger

Every Toyota Prius C model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.