On certain passenger vehicles, if a driver's knees push against the knee bolster (crash element) located under the dashboard, it can contact the headlight switch wiring harness, and an electrical short could occur.
Risk and remedy
Risk
A fire could originate in the left dashboard area.
Remedy
Dealers will install a protective covering on the knee bolster (crash element). in addition, the wiring harness as well as the felt protector on the left side of the dashboard carrier will be checked, and replaced if necessary. The recall began on july 26, 2004. owners should contact audi at 1-800-822-2834.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
10253418Audi Delivery Guidelines.
10253417Audi Delivery Guidelines.
10251027Tightening wheel bolts
10250950Tightening wheel bolts
10249085Google Maps Street View (NVLW))
10249054Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the State of Minnesota.
102440362004 Scheduled Maintenance Intervals
10243930This bulletin provides information on the additional reporting requirements for safety related inquiries.
10243790Audi Elsa Newsletter
10243787Audi Elsa Newsletter
10243780Audi Elsa Newsletter
10243761Audi Elsa Newsletter
10243756Audi Elsa Newsletter
10231144Technical bulletins and updates
10231135Technical bulletins and updates
10231130Idenifying and mixing factory fill engine coolants
10231127ElsaPro Software update and technical bulletins
10228314The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
10228302High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
10228297This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
10226530ATF pan leaks
10226529Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
10224993The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
10224981High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
10221966The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
10221954High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
10221949This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
10216682Engine oils that meet Audi Oil Quality Standards.
10216638If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
10216607Maintenance Card
10212703Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
10210680As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak. Automatic transmission fluid is leaking at the sump pan gasket.
10210679This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
10210650This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. As a result, application of the brake and accelerator pedals at the same time (brake pedal with left foot and accelerator pedal with right foot) results in the following: ? Brake pedal function (normal at all times) overrides any throttle application. ? Diagnostic Trouble Codes (DTCs) will not be stored. ? When the brake pedal is applied while the accelerator is depressed, engine RPMs will return to idle speeds of 1400 RPMs after approximately two seconds. ? When the accelerator is applied while the brake pedal is depressed, the vehicle accelerates slower than usual (reduced engine torque).
10198567This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
10184530This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
1016628400 Software Version Management (SVM), operating instructions
10165539This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage.
Every Audi S6 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.