2016 BMW 328D
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2016 BMW 328D. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2016 BMW 328D. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 328d, 328d xDrive, 2014-2018 328d Sports Wagon, 328d xDrive Sports Wagon, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV, and 2014-2017 X5 xDrive35d SAV diesel vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. The EGR cooler…
Risk and remedy
Risk
A melting intake manifold increases the risk of a fire.
Remedy
Dealers will replace the EGR cooler and inspect the intake manifold, replacing it as necessary, free of charge. This recall includes all vehicles previously recalled under 18V-755. Vehicles previously recalled under 18V-755 will need to have the new remedy performed for this recall. An interim owner notification letter was mailed on January 18, 2022. The remedy is expected to be available in June 2022. Owner notification letters were mailed on July 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2014-2018 328d, 328d xDrive, X5 xDrive35d, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, and 2015-2017 X3 xDrive28d vehicles. The high-pressure fuel pump may fail.
Risk and remedy
Risk
Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Remedy
Dealers will replace the high-pressure fuel pump, free of charge. Owner notification letters were mailed on January 14, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2016 328d xDrive sedans and 2013-2015 328d xDrive station wagon vehicles. The constant-velocity joint which transfers power between the transfer case and the rear drive shaft, may become damaged, possibly resulting in loss of power to the rear wheels.
Risk and remedy
Risk
A loss of power to the rear wheels can affect vehicle control, increasing the risk of a crash. Additionally, when the vehicle is parked after a loss of power to the rear wheels and the parking brake is not engaged, unintended rollaway can occur, increasing the risk of a crash or injury.
Remedy
BMW will notify owners, and dealers will replace the constant-velocity joint and inspect the transfer case, replacing it if necessary, free of charge. The recall began May 22, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW 328d and 328d xDrive, 2014-2018 328d Sports Wagon and 328d xDrive Sports Wagon, 2014-2016 535d and 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV and 2014-2017 X5 xDrive35d SAV vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. If the EGR…
Risk and remedy
Risk
The melting intake manifold can increase the risk of a fire.
Remedy
BMW will notify owners, and dealers will inspect and replace the EGR cooler as necessary. If a leak has already occurred, the engine intake manifold will also be replaced. These repairs will be made free of charge. The recall began May 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Owner complaints
10 complaints
What owners report most
Latest complaints
- Fuel/propulsion system
(1) Failed component: High Pressure Fuel Pump (2) The vehicle complete shut down without warning leaving the driver stranded on the road. (3) The problem has been assessed and confirmed. (4) The vehicle has been inspected by a certified BMW mechanic. (5) There was no warning prior to failure.…
(1) Failed component: High Pressure Fuel Pump (2) The vehicle complete shut down without warning leaving the driver stranded on the road. (3) The problem has been assessed and confirmed. (4) The vehicle has been inspected by a certified BMW mechanic. (5) There was no warning prior to failure. Description: While driving at approximately 30 mph, the vehicle shut down. I was told by a certified BMW mechanic that the high pressure fuel pump imploded, sending metal chards through the fuel injection line thereby disabling the vehicle entirely. I inquired as to whether or not a recall had been issued and BMW told me it had not been issued for my vehicle. I have since learned that a recall was issued due to this exact problem but my VIN was not included in the recall, even though it is the year make and model associated with this very problem. The breakdown/disintegration of the equipment sending metal chard throughout the fuel line disabled and ruined the entire fuel system and its components with repairs costs estimated at $15,285. My car is within the ten year warranty but outside of the 120,000 miles. This is for the 328D xdrive wagon.
- Fuel/propulsion system
The high-pressure fuel pump failed causing the engine to stop completely without any prior warning and the car put itself in park on the highway and would not get out of park to go into neutral or any other gear. This could have caused a very serious crash and highly increased my risk of injury or…
The high-pressure fuel pump failed causing the engine to stop completely without any prior warning and the car put itself in park on the highway and would not get out of park to go into neutral or any other gear. This could have caused a very serious crash and highly increased my risk of injury or death. You are more than welcome to inspect it. It is currently sitting at the dealership waiting for a resolution. My safety and the safety of many others on the 65mph highway were put at risk when the car completely stopped in the middle of the road and would not move until the tow truck arrived to drag it on their truck (would not even go into neutral). The problem was confirmed by the BMW dealership of Cincinnati and inspected by them as well. There were absolutely no warning messages, signs, or anything informing me of an issue before this occurred. However, once the car was towed and we turned it back on once it arrived at the dealership and warning lamp appeared on the dashboard. Here is the link to the video the dealership sent me after it was inspected :: https://api.mykaarma.com/video-walkaround/details?inspection_uuid=633c93939e372707d24145f0&fileType=video
- Engine · Forward collision avoidance › Warnings
Collision warning is often inaccurate. Signaling collision when no obstacles are present. Also, EGR Cooler recall still pending.
- Fuel system, diesel
The contact owns a 2016 BMW 328D. The contact received notification of NHTSA Campaign Number: 21V907000 (Fuel System, Diesel) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. VIN tool confirms parts not available.
- Service brakes
Total brake failure
- Engine
TL* the contact owns a 2016 BMW 328D. The contact received notification of nhtsa campaign number: 18v755000 (engine and engine cooling). The contact stated that BMW of bakersfield (located at 5400 gasoline alley dr, bakersfield, ca 93313, (661) 396-4040) exceeded a reasonable amount of time for…
TL* the contact owns a 2016 BMW 328D. The contact received notification of nhtsa campaign number: 18v755000 (engine and engine cooling). The contact stated that BMW of bakersfield (located at 5400 gasoline alley dr, bakersfield, ca 93313, (661) 396-4040) exceeded a reasonable amount of time for the recall repair. The manufacturer was contacted and stated that the part was not available. The contact had not experienced a failure. Parts distribution disconnect.
- Engine
Recall 18v-755.after waiting since dec 2018 the parts arrived at my dealership for this recall. The care went in for service and the dealer "inspected" the egr cooler and pronounced it "fine". I want to know what happens down the the road when it fails and burns up my vehicle and or garage? If the part IS a defective design shouldn't it be changed? Who IS liable?
- Engine
TL* the contact owns a 2016 BMW 328dx. While the vehicle was undergoing routine service at BMW of charlottesville (located at 1295 richmond rd, charlottesville, va 22911, (434) 270-8664), the contact was informed that the vehicle was included in nhtsa campaign number: 18v755000 (engine and engine…
TL* the contact owns a 2016 BMW 328dx. While the vehicle was undergoing routine service at BMW of charlottesville (located at 1295 richmond rd, charlottesville, va 22911, (434) 270-8664), the contact was informed that the vehicle was included in nhtsa campaign number: 18v755000 (engine and engine cooling). The vehicle was not repaired because the part was not available. The manufacturer was made aware of the issue and did not assist. The contact had not experienced a failure. Vin tool confirms parts not available.
- Fuel/propulsion system
I was driving appx 45 mph (speed limit) on a suburban street when the car ran out of power, slowed down to a crawl and became totally limp. Meanwhile, the image on the navi screen stated, "powertrain failure, drive moderate speed" or something like it. I managed to make a very slow left turn onto a…
I was driving appx 45 mph (speed limit) on a suburban street when the car ran out of power, slowed down to a crawl and became totally limp. Meanwhile, the image on the navi screen stated, "powertrain failure, drive moderate speed" or something like it. I managed to make a very slow left turn onto a cross street b/c I was in shock. I was almost killed by an oncoming car going 45-50 mph. I had the car towed to rusnak BMW; after investigation, they stated it had a "bad fuel pump," and that they have "countless fuel pump problems with BMW diesel cars". The car now has a new fuel pump. I could have died!
- Service brakes · Vehicle speed control
This car was purchased new with the optional "active cruise control" (acc). Under certain conditions the car accelerates unexpectedly. When the brakes are applied by the driver, the acc engagement should always be terminated. In certain situations the acc remains engaged despite the driver's use of…
This car was purchased new with the optional "active cruise control" (acc). Under certain conditions the car accelerates unexpectedly. When the brakes are applied by the driver, the acc engagement should always be terminated. In certain situations the acc remains engaged despite the driver's use of the brakes. When the acc IS engaged and detects an object ahead, the brakes may be applied automatically by the acc. If, while the brakes are still be applied by the acc and the driver also presses the brake pedal, the acc should be disengaged and remain off. However, if the object previously detected ahead has cleared and the driver releases the brakes, the acc control IS restored and the car accelerates. This IS a dangerous and confusing response. Drivers instinctively expect any cruise control to disengage immediately and remain disengaged upon brake application.the BMW active cruise control does not perform this way in the situation described. This acc response IS a repeatable defect that has caused me to experience a hazardous situation while driving.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- High pressure fuel pump failure
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel…
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. During the investigation, ODI sought to determine if the related defect allegation was limited in scope to the recalled population. After review of information request response materials from both FCA and BMW, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA and BMW.During the investigation FCA filed recalls 22V406, 22E048, 22V767, and 22E087 which include vehicles not identified in the initial subject population by ODI. ODI also received recall 21V586, involving loss of motive power due to failed CP4 fuel pumps on certain BMW manufactured vehicles. An information request letter response received from BMW indicated that failed pumps on their vehicles were caused by an interaction between pump internal components and US market diesel fuel, leading to increased slip and eventual particle-generating wear surface. Additional work will be done to identify whether a similar root cause is associated with the FCA recalled population and if similar wear dynamics occur on pumps supplied to vehicle manufacturers other than those included in the recalled population.ODI has upgraded this investigation to an EA in order to 1) determine engineering specifications of internal pump components that are correlated with pump failure leading to loss of motive power or other safety related hazards, 2) identify vehicle populations equipped with alleged defective pump variants, 3) assess if vehicles equipped with alleged defective pump variants result in an unreasonable risk to motor vehicle safety and 4) gather and review any other relevant information related to high pressure fuel pump failure associated with the subject populations of recalls 21V586, 21V880, 21E094, 22V406, 22E048, 22V767, and 22E087.Review of the above information will allow NHTSA to confirm root cause and recall remedy viability, and identify and evaluate vehicle populations equipped with pump components that may pose an unreasonable risk to motor vehicle safety.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11257550, 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11377871, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11446542, 11448163, 11453556, 11458918, 11460558, 11469337
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249439The vehicle demonstrates a power loss and the malfunction indicator lamp (MIL) on. The following fault codes may be stored in the DDE: 24CE00 Hot film air mass meter: Ratio of measured to calculated air mass too high 27F000 Charge air hose monitoring in idle: Charge air hose fallen down 290900 Air system, air to EGR air mass flow plausibility: Measured air mass compared to calculated air mass too high 290A00 Air system, air to EGR air mass flow plausibility: measured air mass compared to calculated air mass too high and high charging pressure control deviation
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10245365Pressure control valve (pcv) extended ltd wty 15 years/150,000 miles
- 10245364Diesel fuel injectors: ltd wty extension to 10 years/120,000 miles
- 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
- 10235205The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via the Voice over LTE (VoLTE) function. For this purpose, the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance, and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
- 10235202Exterior rear lights do not work.
- 10230722After an automatic engine start (MSA start), the transmission intermittently goes into the Park "P" or Neutral "N" position without any customer influence.
- 10230717For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10216793TEC26 Turbo Charger Return
- 10216792Tec25 Wishbone Return
- 10216791Tech24 Snap-in Adapter Return
- 10216758MINI engine oil part number transition and model year 2016 engine oils
- 10216757MINI "Enhanced" dealer self authorized (DSA)K goodwill program
- 10215746Component specific limited warranty extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle Nitrogen Oxide (NOx) Sensor(s) to: 10 years/120,000 miles as determined by the vehicle original in-service date.
- 10214990The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (as of 7/2012 production). This uses map North America NEXT. The Headunit High 2 (HU-H2), also called NBT-EVO, superseded the NBT HU and was introduced in 3/2014. This uses map North America EVO. The Headunit High 4 (HU-H4, also called MGU21) superseded the MGU starting with certain MY2021 vehicles with option code 6U3 Live Cockpit Professional. This uses map North America JOY. The ENTRY Media/Navigation (HU-B) is the low line business version of the navigation system and was introduced in 3/2014. This uses map North America ROUTE. The ENTRY NAV EVO (HU-B2) replaced Entry Media/Navigation as the low-line business version and was introduced in certain MY2018 vehicles. This uses map North America WAY.
- 10214256The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- 10212788The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- 10212780Component and Issue Specific Limited Emission Warranty Extension. This bulletin is notice of a limited emission warranty extension. This is NOT a notice of a Recall or Service Action. There is no immediate repair required unless the BMW vehicle is currently experiencing this problem. Customer Notification Letter Even though this is NOT a Recall, BMW NA is sending VIN-specific customer notification letters. The plastic fuel tank has two openings, one at the top right and the other at the top left. The top right opening (passenger's side, serviceable) provides a mounting point and repair access to the intake fuel pump/level sensor assembly. The top left opening (driver's side, non-serviceable) serves as an access point for the installation of the suction jet pump/level sensor assembly during the fuel tank manufacturing process. After these components are installed, the top left side opening is then permanently closed and sealed with the installation of a circular Coex biopolymer plastic cover plate which is welded into place. Over time, the left side opening plastic cover plate weld may become damaged. Should this occur, there is the possibility of fuel leakage. Additionally, your vehicle will store the corresponding fault codes that may also be generated, and the Malfunction Indicator Lamp (MIL) will illuminate.
- 10212779Component and Issue Specific Limited Emission Warranty Extension. This component-specific limited emission warranty extension applies to defects in materials or workmanship.
- 10205068Customer may complain of reduced air flow when the air conditioning system is operated for an extended time, usually longer than 30 minutes.
- 10204649For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's engine high pressure fuel pump (shown) to: 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10203340Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle,when turning the steering wheel.
- 10203338The trunk lid/hatch does not open fully when unlatched with remote or hands-free operation.
- 10200489TELEMATICS UNIT RETROFIT TO 4G CELLULAR TECHNOLOGY: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
- 10200487TELEMATICS UNIT DEACTIVATION DUE TO 3G CELLULAR TECHNOLOGY DISCONTINUATION: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
- 10200249The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022. The decision to phase out 3G network technology was made at the discretion of the respective cellular carriers and lies beyond the control of BMW. Due to the phase-out, BMW Assist and ConnectedDrive services will no longer be supported after this date.
- 10200238Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle, when turning the steering wheel.
- 10200228On rare occasions during an engine oil service, the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing.
- 10199292B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.
- 10198899B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.
- 10188938COMBUSTION CONTROL VALVE LIFT AT IDLE: The vehicle will run rough or hesitate when accelerating from a stationary position.
- 10186889?A/C COOLING INTERMITTENT REDUCTION OF AIR FLOW: Customer may complain of reduced air flow when the air conditioning system is operated for an extended time, usually longer than 30 minutes. The evaporator starts to freeze up.
- 10186227?A/C COOLING INTERMITTENT REDUCTION OF AIR FLOW: Customer may complain of reduced air flow when the air conditioning system is operated for an extended time, usually longer than 30 minutes. The evaporator starts to freeze up.
- 10184584Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full: Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full.There are no faults stored in the system for the washer fluid level switch.
- 10184567DIESEL FUEL INJECTORS: LTD WTY EXTENSION TO 10 YEARS/120,000 MILES: Zero-quantity adaptation injector cylinder 1: permitted filtered actuation duration 24BB00 correction too high zero-quantity adaptation injector cylinder 2: permitted filtered actuation duration 24BF00 correction too high zero-quantity adaptation injector cylinder 3: permitted filtered actuation duration 24BD00 correction too high zero-quantity adaptation injector cylinder 4: permitted filtered actuation duration 24C000 correction too high.
- 10181231BMW TURBOCORD PORTABLE EV 120 V/240 V CHARGER: The BMW-approved accessory TurboCord electric vehicle (EV) charger will not charge the vehicle.
- 10179811EME GROUND CONNECTION MONITORING FAULTS: Check Control message (CCM ID 794): "Drive. Check as soon as possible" illuminates. Increased ground cable contact resistance at Electrical Machine Electronics (EME) due to corrosion/oxidation.
- 10179009NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier.
Every BMW 328D model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.