2018 BMW 328D
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2018 BMW 328D. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2018 BMW 328D. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2018 328D SportsWagon, 328D xDrive SportsWagon, 328D xDrive, and 328D diesel vehicles equipped with an exhaust gas recirculation (EGR) module with an integrated cooler. The EGR cooler may leak internally, causing coolant to mix with diesel engine soot, which could result in smoldering particles and a…
Risk and remedy
Risk
Smoldering particles and a melting intake manifold increase the risk of a fire.
Remedy
Dealers will replace the EGR cooler, inspect and replace the intake manifold, if necessary, and clean the EGR pipe connecting the cooler to the manifold, free of charge. Owner notification letters are expected to be mailed December 5, 2025. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning December 5, 2025. This recall is an expansion of previous recall number 21V907.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 328d, 328d xDrive, 2014-2018 328d Sports Wagon, 328d xDrive Sports Wagon, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV, and 2014-2017 X5 xDrive35d SAV diesel vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. The EGR cooler…
Risk and remedy
Risk
A melting intake manifold increases the risk of a fire.
Remedy
Dealers will replace the EGR cooler and inspect the intake manifold, replacing it as necessary, free of charge. This recall includes all vehicles previously recalled under 18V-755. Vehicles previously recalled under 18V-755 will need to have the new remedy performed for this recall. An interim owner notification letter was mailed on January 18, 2022. The remedy is expected to be available in June 2022. Owner notification letters were mailed on July 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2014-2018 328d, 328d xDrive, X5 xDrive35d, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, and 2015-2017 X3 xDrive28d vehicles. The high-pressure fuel pump may fail.
Risk and remedy
Risk
Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Remedy
Dealers will replace the high-pressure fuel pump, free of charge. Owner notification letters were mailed on January 14, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW 328d and 328d xDrive, 2014-2018 328d Sports Wagon and 328d xDrive Sports Wagon, 2014-2016 535d and 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV and 2014-2017 X5 xDrive35d SAV vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. If the EGR…
Risk and remedy
Risk
The melting intake manifold can increase the risk of a fire.
Remedy
BMW will notify owners, and dealers will inspect and replace the EGR cooler as necessary. If a leak has already occurred, the engine intake manifold will also be replaced. These repairs will be made free of charge. The recall began May 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Owner complaints
10 complaints
What owners report most
Latest complaints
- Engine
Engine seized on freeway. Car has 99,000 miles. Dealership says engine seized and has to be replaced at a higher cost than the car is worth. Unknown warning lights.
- Fuel/propulsion system · Power train
While driving down the road my car gave me a notification “DRIVETRAIN MALFUNCTION” said full engine output not available then it just stopped and shut off (limp mode) it has done this multiple times and the shop says that it may be the High Pressure Fuel Pump. This has happened on a busy city road…
While driving down the road my car gave me a notification “DRIVETRAIN MALFUNCTION” said full engine output not available then it just stopped and shut off (limp mode) it has done this multiple times and the shop says that it may be the High Pressure Fuel Pump. This has happened on a busy city road with high traffic and curvy roads where my car would not move and people could not see me when coming over the hill until last minute narrowly missing my car. Luckily there wasn’t oncoming traffic. I had to switch ignition off and on (it then said “transmission not in park”) when it was in park. Finally started back after having to shut ignition off and on twice. Then anytime I got above 40 it went back into limp mode.
- Fuel/propulsion system
In 2021, my vehicle had the high-pressure fuel pump replaced by an authorized BMW dealership under Safety Recall 21V-586 (BMW SIB 13 01 21). At the time of the recall, my vehicle had approximately 43,000 miles, and I was not experiencing any fuel system or drivability issues. The high-pressure fuel…
In 2021, my vehicle had the high-pressure fuel pump replaced by an authorized BMW dealership under Safety Recall 21V-586 (BMW SIB 13 01 21). At the time of the recall, my vehicle had approximately 43,000 miles, and I was not experiencing any fuel system or drivability issues. The high-pressure fuel pump was replaced solely because BMW determined the original component posed a safety risk. My vehicle now has approximately 128,000 miles. The replacement high-pressure fuel pump installed as part of the recall has failed. Two independent repair facilities have diagnosed the high-pressure fuel pump as the cause of the no-start/fuel delivery issue. When I took the vehicle to a BMW dealership, I was informed that additional diagnostic work was needed to inspect for possible metal contamination from the fuel pump, but I have not yet been provided with a final written diagnosis. I am concerned that the replacement part installed as the recall remedy has failed in the same manner as the original recalled component. If confirmed, this raises concerns about the durability and effectiveness of the recall repair. I respectfully request that NHTSA review whether similar failures have been reported involving replacement high-pressure fuel pumps installed under Recall 21V-586. I am submitting this complaint so the issue can be documented and evaluated as a potential safety concern.
- Fuel/propulsion system · Power train
Car just shut off when driving at 65mph and never started back up, took it in and repair was a bad fuel pump and fuel rail line causing metal shards to go through fuel tank and injectors.
- Fuel system, diesel
The contact owns a 2018 BMW 328D. The contact stated while driving 50 MPH, the vehicle started shuddering significantly. The contact was able to pull over and the check engine warning light illuminated. The vehicle was towed to the contact's workplace. The vehicle was not diagnosed or repaired by…
The contact owns a 2018 BMW 328D. The contact stated while driving 50 MPH, the vehicle started shuddering significantly. The contact was able to pull over and the check engine warning light illuminated. The vehicle was towed to the contact's workplace. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and informed the contact that there was no record of a recall on the VIN. However, the contact stated that he received notification of NHTSA Campaign Number: 21V586000 (FUEL SYSTEM, DIESEL). The vehicle remained at the workplace and had not been driven since. The approximate failure mileage was 102,000.
- Fuel system, diesel
The contact owns a 2018 BMW 328d. The contact received notification of NHTSA Campaign Number: 21V586000 (Fuel System, Diesel) however, the part to do the repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The local dealer…
The contact owns a 2018 BMW 328d. The contact received notification of NHTSA Campaign Number: 21V586000 (Fuel System, Diesel) however, the part to do the repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The local dealer was contacted and confirmed that parts were not yet available. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Fuel system, diesel
The contact owns a 2018 BMW 328D. The contact was informed by a third party that his vehicle was included in NHTSA Campaign Number: 21V568000 (Fuel System, Diesel) however, the part for the recall repair was unavailable. The dealer was made aware of the issue and informed the contact that the part…
The contact owns a 2018 BMW 328D. The contact was informed by a third party that his vehicle was included in NHTSA Campaign Number: 21V568000 (Fuel System, Diesel) however, the part for the recall repair was unavailable. The dealer was made aware of the issue and informed the contact that the part was not yet available. The manufacturer had been notified of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. VIN tool confirms parts not available.
- Fuel system, diesel
The contact owns a 2018 BMW 328D. The contact stated that the vehicle failed to start up without warning. Due to the failure, the contact had the vehicle towed to an independent mechanic who was unable to diagnose the failure. The vehicle was then towed to a dealer where they replaced the fuel…
The contact owns a 2018 BMW 328D. The contact stated that the vehicle failed to start up without warning. Due to the failure, the contact had the vehicle towed to an independent mechanic who was unable to diagnose the failure. The vehicle was then towed to a dealer where they replaced the fuel pump; however, the fuel pump failed during the test drive. The contact was also informed by the dealer that the vehicle was included in NHTSA Campaign Number: 21V586000 (Fuel System, Diesel) however, the part for the recall repair was unavailable. The manufacturer had not been notified of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was unknown. The vehicle remained in the possession of the dealer. VIN tool confirms parts are not available.
- Fuel system, diesel › Delivery › Fuel pump
The contact owns a 2018 BMW 328D. The contact stated while driving 50 MPH, the vehicle inadvertently stalled. An unknown warning light illuminated the instrument panel. The contact veered to the side of the road. The vehicle was towed to the dealer to be diagnosed. The contact was informed that the…
The contact owns a 2018 BMW 328D. The contact stated while driving 50 MPH, the vehicle inadvertently stalled. An unknown warning light illuminated the instrument panel. The contact veered to the side of the road. The vehicle was towed to the dealer to be diagnosed. The contact was informed that the high-pressure pump had exploded, and the explosion had damaged other parts of the vehicle. The contact stated the vehicle was repaired. The contact received a recall notification for NHTSA Campaign Number: 21V586000 (Fuel System, Diesel) however, the part for the recall repair was not yet available. The manufacturer was notified of the failure. The contact stated recall has been repaired. The approximate failure mileage was 34,914.
- Fuel/propulsion system
Car was in motion on a street. Engine stalled. Car wouldn't start. Towed to BMW dealership. Catastrophic high pressure fuel pump failure at approximately 7400 miles. Metal shavings throughout entire fuel system. Injectors, fuel lines, fuel pump, and fuel tank needed to be replaced.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- High pressure fuel pump failure
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel…
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. During the investigation, ODI sought to determine if the related defect allegation was limited in scope to the recalled population. After review of information request response materials from both FCA and BMW, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA and BMW.During the investigation FCA filed recalls 22V406, 22E048, 22V767, and 22E087 which include vehicles not identified in the initial subject population by ODI. ODI also received recall 21V586, involving loss of motive power due to failed CP4 fuel pumps on certain BMW manufactured vehicles. An information request letter response received from BMW indicated that failed pumps on their vehicles were caused by an interaction between pump internal components and US market diesel fuel, leading to increased slip and eventual particle-generating wear surface. Additional work will be done to identify whether a similar root cause is associated with the FCA recalled population and if similar wear dynamics occur on pumps supplied to vehicle manufacturers other than those included in the recalled population.ODI has upgraded this investigation to an EA in order to 1) determine engineering specifications of internal pump components that are correlated with pump failure leading to loss of motive power or other safety related hazards, 2) identify vehicle populations equipped with alleged defective pump variants, 3) assess if vehicles equipped with alleged defective pump variants result in an unreasonable risk to motor vehicle safety and 4) gather and review any other relevant information related to high pressure fuel pump failure associated with the subject populations of recalls 21V586, 21V880, 21E094, 22V406, 22E048, 22V767, and 22E087.Review of the above information will allow NHTSA to confirm root cause and recall remedy viability, and identify and evaluate vehicle populations equipped with pump components that may pose an unreasonable risk to motor vehicle safety.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11257550, 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11377871, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11446542, 11448163, 11453556, 11458918, 11460558, 11469337
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249439The vehicle demonstrates a power loss and the malfunction indicator lamp (MIL) on. The following fault codes may be stored in the DDE: 24CE00 Hot film air mass meter: Ratio of measured to calculated air mass too high 27F000 Charge air hose monitoring in idle: Charge air hose fallen down 290900 Air system, air to EGR air mass flow plausibility: Measured air mass compared to calculated air mass too high 290A00 Air system, air to EGR air mass flow plausibility: measured air mass compared to calculated air mass too high and high charging pressure control deviation
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10245367Check Control message (CCM) indicates: (ID 213): Stop, exercising due care. Voltage supply The Service Engine Soon light is on with the following DME Fault Code: 21B209 - Starter alternator / belt for 48V system (OSA_RIEMEN_RISS): Belt betweenCombustion engine and starter generator torn And/or one or more of the following other issues are also occurring: Noise in the area of the belt drive. Odor from the engine compartment. Smoke formation in the area of the belt drive. Drive belt damaged or prematurely worn. Torn drive belt.
- 10245365Pressure control valve (pcv) extended ltd wty 15 years/150,000 miles
- 10245364Diesel fuel injectors: ltd wty extension to 10 years/120,000 miles
- 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
- 10235205The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via the Voice over LTE (VoLTE) function. For this purpose, the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance, and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
- 10235202Exterior rear lights do not work.
- 10230722After an automatic engine start (MSA start), the transmission intermittently goes into the Park "P" or Neutral "N" position without any customer influence.
- 10230717For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10225128Due to a production error, the telematics control units were delivered without an IMS configuration.
- 10215746Component specific limited warranty extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle Nitrogen Oxide (NOx) Sensor(s) to: 10 years/120,000 miles as determined by the vehicle original in-service date.
- 10214990The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (as of 7/2012 production). This uses map North America NEXT. The Headunit High 2 (HU-H2), also called NBT-EVO, superseded the NBT HU and was introduced in 3/2014. This uses map North America EVO. The Headunit High 4 (HU-H4, also called MGU21) superseded the MGU starting with certain MY2021 vehicles with option code 6U3 Live Cockpit Professional. This uses map North America JOY. The ENTRY Media/Navigation (HU-B) is the low line business version of the navigation system and was introduced in 3/2014. This uses map North America ROUTE. The ENTRY NAV EVO (HU-B2) replaced Entry Media/Navigation as the low-line business version and was introduced in certain MY2018 vehicles. This uses map North America WAY.
- 10214256The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- 10212788The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- 10212780Component and Issue Specific Limited Emission Warranty Extension. This bulletin is notice of a limited emission warranty extension. This is NOT a notice of a Recall or Service Action. There is no immediate repair required unless the BMW vehicle is currently experiencing this problem. Customer Notification Letter Even though this is NOT a Recall, BMW NA is sending VIN-specific customer notification letters. The plastic fuel tank has two openings, one at the top right and the other at the top left. The top right opening (passenger's side, serviceable) provides a mounting point and repair access to the intake fuel pump/level sensor assembly. The top left opening (driver's side, non-serviceable) serves as an access point for the installation of the suction jet pump/level sensor assembly during the fuel tank manufacturing process. After these components are installed, the top left side opening is then permanently closed and sealed with the installation of a circular Coex biopolymer plastic cover plate which is welded into place. Over time, the left side opening plastic cover plate weld may become damaged. Should this occur, there is the possibility of fuel leakage. Additionally, your vehicle will store the corresponding fault codes that may also be generated, and the Malfunction Indicator Lamp (MIL) will illuminate.
- 10212779Component and Issue Specific Limited Emission Warranty Extension. This component-specific limited emission warranty extension applies to defects in materials or workmanship.
- 10205068Customer may complain of reduced air flow when the air conditioning system is operated for an extended time, usually longer than 30 minutes.
- 10204649For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's engine high pressure fuel pump (shown) to: 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10203340Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle,when turning the steering wheel.
- 10203338The trunk lid/hatch does not open fully when unlatched with remote or hands-free operation.
- 10200489TELEMATICS UNIT RETROFIT TO 4G CELLULAR TECHNOLOGY: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
- 10200487TELEMATICS UNIT DEACTIVATION DUE TO 3G CELLULAR TECHNOLOGY DISCONTINUATION: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
- 10200249The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022. The decision to phase out 3G network technology was made at the discretion of the respective cellular carriers and lies beyond the control of BMW. Due to the phase-out, BMW Assist and ConnectedDrive services will no longer be supported after this date.
- 10200238Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle, when turning the steering wheel.
- 10200228On rare occasions during an engine oil service, the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing.
- 10199292B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.
- 10198899B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.
- 10188938COMBUSTION CONTROL VALVE LIFT AT IDLE: The vehicle will run rough or hesitate when accelerating from a stationary position.
- 10186889?A/C COOLING INTERMITTENT REDUCTION OF AIR FLOW: Customer may complain of reduced air flow when the air conditioning system is operated for an extended time, usually longer than 30 minutes. The evaporator starts to freeze up.
- 10186227?A/C COOLING INTERMITTENT REDUCTION OF AIR FLOW: Customer may complain of reduced air flow when the air conditioning system is operated for an extended time, usually longer than 30 minutes. The evaporator starts to freeze up.
- 10184584Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full: Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full.There are no faults stored in the system for the washer fluid level switch.
- 10184567DIESEL FUEL INJECTORS: LTD WTY EXTENSION TO 10 YEARS/120,000 MILES: Zero-quantity adaptation injector cylinder 1: permitted filtered actuation duration 24BB00 correction too high zero-quantity adaptation injector cylinder 2: permitted filtered actuation duration 24BF00 correction too high zero-quantity adaptation injector cylinder 3: permitted filtered actuation duration 24BD00 correction too high zero-quantity adaptation injector cylinder 4: permitted filtered actuation duration 24C000 correction too high.
- 10181231BMW TURBOCORD PORTABLE EV 120 V/240 V CHARGER: The BMW-approved accessory TurboCord electric vehicle (EV) charger will not charge the vehicle.
- 10179811EME GROUND CONNECTION MONITORING FAULTS: Check Control message (CCM ID 794): "Drive. Check as soon as possible" illuminates. Increased ground cable contact resistance at Electrical Machine Electronics (EME) due to corrosion/oxidation.
- 10179009NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier.
- 10179003VEHICLE DOES NOT START BATTERY TOTALLY DISCHARGED: The customer's vehicle does not start due to a totally discharged battery.
- 10178996TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving.
- 10177628VEHICLE DOES NOT START BATTERY TOTALLY DISCHARGED: The customer's vehicle does not start due to a totally discharged battery.
Every BMW 328D model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.