2006 BMW 330I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2006 BMW 330I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2006 BMW 330I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy
Dealers will inspect and replace the driver's air bag module as necessary, free of charge. Owner notification letters were mailed August 30, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2006 525i, 525xi, 530i, 530xi, 530xi Sports Wagon, 325i, 325xi, 325xi Sports Wagon, 330i, 330xi, Z4 3.0i and Z4 3.0si vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk and remedy
Risk
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. The recall began May 30, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion to recall 17V-683.
BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons; 2001-2005 325xi sedans and Sports Wagons; 2006 325i coupes and convertibles; 2001-2006 330i sedans, coupes, and convertibles; 2001-2005 330xi…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, excessive internal pressure could cause rupturing of the inflator resulting in metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.
Remedy
Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger side frontal air bag, free of charge. An interim notice was mailed to owners in September 2014. A second notice was mailed when an adequate supply of parts became available, on December 1, 2014. Owners may contact BMW customer service at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.
Risk and remedy
Risk
Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Remedy
BMW will notify owners, and dealers will replace the wiring and electrical connectors, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, Inc. (BMW) is recalling certain 2006 325i, 325xi, 330i, 330xi, 525i, 525xi, 530i, 530xi, and 550i vehicles equipped with the Sport Seat option and certain 2006 525i, 525xi, 530i, 530xi, 550i vehicles with standard seats. The front passenger seat occupant detection mat that determines if, and how, the passenger frontal air bag should…
Risk and remedy
Risk
Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
Remedy
BMW will notify owners, and dealers will repair the occupant detection mat to eliminate the possibility that it may crack, replacing it as necessary, free of charge. The recall began September 1, 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America LLC (BMW) is recalling certain model year 2006 325i, 325xi, 330i, 330xi sedans and 325xi sports wagons, model year 2007 328i, 328xi, 335i, 335xi sedans and 328i and 328xi sports wagons, model year 2006-2007 525i, 525xi, 530i, 530xi, 550i sedans and 530xi sports wagons, model year 2006 760i sedans, model year 2006-2007 750i, 750Li, and…
Risk and remedy
Risk
Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
Remedy
BMW will notify owners with an interim notification letter in January 2014 since parts are not currently available. When parts are available, BMW sent a second letter in August and dealers will repair the occupant detection mat to eliminate the possibility that it may crack, free of charge. Additionally, owners of model year 2006-2007 3 Series with standard seats, 5 Series with comfort seats, and Z4 models, will receive an extended warranty on their front passenger seat occupant detection mat. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Owner complaints
219 complaints5 involved a crash10 involved a fire1 injuries
What owners report most
Latest complaints
- Engine and engine cooling
The contact owns a 2006 BMW 33I. The contact stated that while driving at 75 MPH, the contact noticed smoke coming into the interior of the vehicle. No warning lights were illuminated. In addition, the contact noticed fire coming from underneath the hood. The contact exited the vehicle. The contact…
The contact owns a 2006 BMW 33I. The contact stated that while driving at 75 MPH, the contact noticed smoke coming into the interior of the vehicle. No warning lights were illuminated. In addition, the contact noticed fire coming from underneath the hood. The contact exited the vehicle. The contact stated he had to leave the vehicle abandoned for about a month. The contact stated the vehicle had been towed to an impound lot. The vehicle was then towed to the contact’s residence. The contact stated that a certified independent mechanic diagnosed the failure as thermal damage due to the NHTSA recalls. The vehicle was then towed to the dealer, where it was diagnosed with an oil leak that caused the fire. The contact was informed of a recall NHTSA Campaign Number: 17V683000 (Engine and Engine Cooling) and NHTSA Campaign Number: 19V273000 (Engine and Engine Cooling) however the VIN was not included. The manufacturer was made aware of the failure, and a case was filed. The contact was advised to have the vehicle towed to the dealer for further investigation. The contact stated that the manufacturer initiated an investigation, and after the investigation was performed, the case was closed. The failure mileage was approximately 101,000.
- Air bags
I was getting ready to leave my home and both front airbags deployed on me, which also resulted in my windshield breaking. I did not hit anything with the vehicle. I then looked up the VIN and noticed the 2 open recalls one is for the airbags, I contacted BMW left the service manager numerous…
I was getting ready to leave my home and both front airbags deployed on me, which also resulted in my windshield breaking. I did not hit anything with the vehicle. I then looked up the VIN and noticed the 2 open recalls one is for the airbags, I contacted BMW left the service manager numerous voicemails he never returned any of my calls. Then I contacted BMW North America, I got the vehicle towed to BMW of Carslbad just before Thanksgiving 2024 I just picked up my vehicle on January 6 2025 and they did not fix the recalls on the vehicle. I have been without a vehicle since before Thanksgiving!! I have health issues and I am missing appointments. I am on a fixed income my husband just passed away. I need someone to help me I keep getting the run around. If there are open recalls they need to be fixed I don't understand.
- Visibility › Power window devices and controls
Rolled down back window it broke and didn’t go back up
- Air bags
My airbag light is on. I checked the website, and realize that there is a recall for Takata airbags, however, when I input my VIN#, my vehicle does not show the active recall. There is an alert on the website that says "DO NOT DRIVE"....I cannot get any assistance from Takata when I call; they keep telling me that my car is not included. I don't believe it is safe to drive my car, and can't get any help.
- Unknown or other
UNKNOWN. I went to do the smog check on my car and I found that I have a recall and the description on the paper is positive crankcase ventilation (pcv) valve heater
- Engine and engine cooling
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, a burning odor was detected. The contact parked the vehicle; however, the vehicle failed to restart. Prior to the failure, the dealer was made aware of the issue but confirmed that parts were not yet available and scheduled an appointment for April. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 149,000. Parts distribution disconnect.
- Electrical system
All door lock actuators (including the fuel cap door cover) stopped working after driving the vehicle. The passenger and both rear doors were able to open via the inside door handle, but the driver side door could not be unlocked via the key fob, console lock button, or manually pulling the inside…
All door lock actuators (including the fuel cap door cover) stopped working after driving the vehicle. The passenger and both rear doors were able to open via the inside door handle, but the driver side door could not be unlocked via the key fob, console lock button, or manually pulling the inside door handle. The fuel cap door cover could only be opened via the emergency release pull in the trunk. After inspecting the fuse box, I found that fuse 57a was blown. I replaced the fuse and the locking mechanisms started functioning again. weeks later the same issue occurred, only replacing the fuses remedied the problem for only a day or two. The fact that the driver's side door could not be opened by ANY means from inside or outside the vehicle poses a severe safety risk in situations where the driver of the car needs to exit the vehicle themself or be evacuated carefully in the event of injury. There are NO warnings, messages or warning signs before this occurs. This appears to be a common issue on my model and others, originating from issues with the door lock actuators. BMW even has a service information bulletin about it: "SI B51 19 07". The fact that the driver-side door can spontaneously become unopenable from inside or outside while the driver is in the car is a HUGE safety risk.
- Engine and engine cooling
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the vehicle was emitting an abnormal oil burning odor. The manufacturer was not made aware of the issue. The failure mileage was unknown. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that after turning off the vehicle, she noticed that the engine was extremely hot. The dealer was made aware of the failure and confirmed that parts were not yet available. The vehicle was not diagnosed nor repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 88,000. VIN tool confirms parts not available.
- Electrical system · Engine · Fuel/propulsion system
BMW has issued a recall with no resolution. My engine is making noises from the crankcase and no alternative has been offered at this moment. The dealer does not want to address the issue.
- Engine and engine cooling
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2006 BMW 330I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Electrical system
The contact owned a 2006 BMW 330i. The contact stated that while driving approximately 25 MPH, the air conditioning unit suddenly shut off and smoke began to come out of the air conditioning vents. After the contact exited the vehicle flames were present coming from under the passenger side…
The contact owned a 2006 BMW 330i. The contact stated that while driving approximately 25 MPH, the air conditioning unit suddenly shut off and smoke began to come out of the air conditioning vents. After the contact exited the vehicle flames were present coming from under the passenger side dashboard. The fire and police departments were called to the scene and the flames were extinguished. During the incident, the vehicle was destroyed. A fire and a police report were taken at the scene and the vehicle was towed away. The local dealer was notified of the incident. The manufacturer was not yet contacted. The failure mileage was 190,000.
- Fuel/propulsion system · Unknown or other
Fuel pump leaking gas due to cracks on top of fuel pump
- Engine · Engine and engine cooling
The contact owns a 2006 BMW 330i. The contact stated while driving at 45 MPH, the vehicle stalled inadvertently and the engine exploded. The automatic transmission gearbox warning light illuminated. The contact immediately exited the vehicle. The contact stated that there was a significant amount…
The contact owns a 2006 BMW 330i. The contact stated while driving at 45 MPH, the vehicle stalled inadvertently and the engine exploded. The automatic transmission gearbox warning light illuminated. The contact immediately exited the vehicle. The contact stated that there was a significant amount of dark smoke and there was fire underneath the hood of the vehicle. The fire was extinguished independently. The contact did not sustain any injuries. A police report was filed. The vehicle was towed to the contact’s residence. The vehicle was then towed to an independent mechanic where the engine, the valves and the engine compartment were replaced. The vehicle was repaired. The contact later received notification of NHTSA Campaign Number: 22V119000 (Engine And Engine Cooling), which she associated with the failure. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 111,000.
- Electrical system
My car was just sitting in my driveway and my roommate noticed she said is there is your car supposed to be on fire and we went out there had to break the windows and it was already on fire and totally ruined from any repair. I didn't receive a recall until a year after it had already caught on fire. The car is totaled in my backyard. And is beyond repair because of the fire
- Engine and engine cooling
The contact owned a 2006 BMW 330i. The contact stated while her boyfriend was driving 65 mph, he heard an abnormal noise coming from underneath the vehicle. The contact stated no warning light was illuminated. The driver was able to park on the side of the road and exit before the vehicle was…
The contact owned a 2006 BMW 330i. The contact stated while her boyfriend was driving 65 mph, he heard an abnormal noise coming from underneath the vehicle. The contact stated no warning light was illuminated. The driver was able to park on the side of the road and exit before the vehicle was engulfed in flames. The driver saw the fire starting under the transmission. The driver stated no one was injured nor sought medical attention. The driver stated the fire department extinguished the fire. A fire report was filed. The driver stated the police did arrive at the location and filed a police report. The vehicle was not drivable. The insurance company deemed the vehicle a total loss. The contact towed the vehicle to the record yard. A dealer was not contacted. The manufacturer had not been informed of the failure. The contact received notification of NHTSA Campaign Number: 22V119000 ( Engine and Engine Cooling) on 4/25/2022. The failure mileage was approximately 100,000. Consumer stated her vehicle hit a donkey head on but none of the airbags went off.
- Air bags · Air bags › Sensor › Occupant classification · Air bags › Sensor › Occupant classification › Rear passenger
Passénger seat occupancy seat mat has failed and passenger air bag system does not work. Diagnosed recently- repair scheduled soon for cost of $1588.35 It looks like there may have been a recall in 2017 but I don’t have any record of being notified or having it fixed.
- Air bags
The vehicle has an unexplained and unrepairable defect related to the main airbag control unit module, BMW part number 65779184432 (current version); believe part 65770394017 applied to my vehicle as-built. The control module generates internal control unit fault code 93D7. Both the airbag warning…
The vehicle has an unexplained and unrepairable defect related to the main airbag control unit module, BMW part number 65779184432 (current version); believe part 65770394017 applied to my vehicle as-built. The control module generates internal control unit fault code 93D7. Both the airbag warning light and seatbelt light are continuously illuminated. According to dealer technician, the code IS locked in and cannot be cleared. Advice provided was that the unit can be replaced and then recoded at estimated cost of approximately $2,000. If a repair can be effectuated with an updated part, then it appears that my car and perhaps all other similarly aged vehicles have a defective main airbag control unit module. A faulty airbag module would be a defect in a critical defect in a safety system's performance that unreasonably increases risk of death or serious injury in an accident. The fault thus poses a risk to motor vehicle safety. Further, based on openly available information, it appears that numerous other vehicles have similar, potentially defective, main airbag control modules. Finally, it appears that BMW updated this part approximately 15 times in a 6-year period, which IS about double the update frequency for comparable vehicle--noting that this IS based only on my limited review. Regardless, that data suggest that BMW has had some awareness that the airbag control module had performance difficulties. Thank you.
- Electrical system · Exterior lighting
E90 BMW reverse light stop working do to car computer system fault, this poses a high risk when vehicle IS in reverse other driver are not notified. This can cause a potential accident.
- Air bags · Seat belts · Seats
Passenger restraint malfunction warning and passenger air bag turned off
- Unknown or other
After ~30 min driving on the capital beltway around washington dc, I existed at exit 4 on I270 north). The engine suddenly evolved very fast when I was braking before a traffic light between I270 ramp and falls road. I felt like the car just wanted to keep moving. I ended up hitting a vehicle in…
After ~30 min driving on the capital beltway around washington dc, I existed at exit 4 on I270 north). The engine suddenly evolved very fast when I was braking before a traffic light between I270 ramp and falls road. I felt like the car just wanted to keep moving. I ended up hitting a vehicle in the front though the damages on both were very minor. I immediately turned off the engine and place it in park. After a few minutes (the other driver and I exchanged contact info), I restarted the engine and the car seemed to work ok.
- Air bags · Electrical system · Power train
Air bag. Warning sensor,adaptive headlights warning,power steering leaking,brakes clumping,blower heater motor and module had to replace.
- Electrical system
Complete loss of power, shut car off for a few minutes, when tryi g to restart vehicle noticed zero power to any components
- Air bags · Seat belts
Few miles after starting to drive error icon was shown on the display showing airbag icon and seatbelt icon. Was able to display the error code: cc-id 97. the front passenger seat was occupied. The car was in motion when the error was triggered, at about 25 mph on city streets.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10225126Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.
- 10225115Customer is unable to power up or charge accessories through a plug adapter inserted in the front 12-volt power socket plug. Alternatively, it will only operate when constant downward hand pressure is maintained.
- 10218384Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.
- 10218380On these Plug-in Hybrid Electric Vehicles (PHEV), the air conditioning cycles from cold to warm air while driving or while at a standstill. The vent outlet temperatures vary by 25 degrees Fahrenheit or more (38 F to 60 F+; 3 to 15+ Celsius) without changing any climate control settings. A difference may be felt in cooling power compared from left to right. In some cases, the air conditioning may have stopped blowing cold air altogether. A rattling noise may also be heard coming from the electrical coolant condenser (EKMV).
- 10218378A rattling/droning noise is heard in the vehicle interior when the air conditioning (AC) is activated. Vibrations are felt in the driver's footwell.
- 10218369Whistling noise is heard coming from the front bumper while driving at highway speeds.
- 10218367Starting mid-May 2022, the QR code on the tite sidewalls of Pirelli tires has been omitted due to patent reasons.
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
- 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10162431"Erroneous CC Message "Remote control! Do not switch off the engine" is Displayed. An erroneous CC message, "Remote control!" " Do not switch off the engine" is displayed in the Central Information Display (CID). The engine can still be started, even with the CC message displayed. CAUSE: Car Access System (CAS) software error"
- 10162426Trunk Lid Intermittently Does Not Open or Latch. Intermittently the trunk lid does not pop open when using the remote, or latch when closing. If the vehicle is driven and the trunk is not closed fully, a Check Control message will be displayed in the instrument cluster. CAUSE: The trunk lid is out of tolerance. When opening or closing the trunk lid, the latch rubs against the striker because of insufficient clearance.
- 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
- 10162406Power Mirrors and/or Windows are Inoperative. The power windows and/or power mirrors are inoperative. The LED on the headlight switch is flashing. There is a check control message for Windows/Mirrors/ Headlights. There may also be a complaint of water in one or both headlights. One of the following fault codes may be stored: * 9CBD - Communication with stepper motor box left defective * 9CBE - Communication with stepper motor box right defective * 9CC1 - Communication with mirror driver side defective * 9CC2 - Communication with mirror passenger side defective/Right Stepper Motor Controller (SMC) signaling fault * 9CCF - Communication with LIN control defective Left and/or right headlight housing cover is not properly fitted allowing water ingress into the Stepper Motor Controller (SMC) connector. CAUSE: Left and/or right headlight housing cover is not properly fitted allowing water ingress into the Stepper Motor Controller (SMC) connector.
- 10162404"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Follow the diagnosis test plan using the latest ISTA version. In Information Search, select the "Function Structure"" tab. Select Body, Mirror, Door mirror, Driver's or passenger side, Exterior Mirror Malfunction, and then press "Start Search". Select test plan ""AM5102_00010".
- 10162395N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
- 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10154816In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
- 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
- 10152314Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM door lock status due to voltage variations
- 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
- 10151323ELV Does Not Release. The customer complains of a no-crank, no-start situation. The condition may be intermittent. The ELV (Electric Steering Lock) warning is shown in the Instrument Cluster.
- 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151255ISTA/P Cannot Program an E-Series N55 Replacement DME. ISTA/P fails when attempting to program a replacement DME (MEVD172) on BN2000 E-Series vehicles with the Continental HPP. Part number: 12 14 8 618 483. DME logistic error between the replacement hardware and basic software prevents correct programming with ISTA/P.
- 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151170N51 Engine: Service Engine Soon Lamp Illuminated - Loss of Power and Various Faults Stored in the DME. The customer complains that the Service Engine Soon lamp is illuminated. The vehicle has lost power; the engine cranks but will not start; and various faults are stored in the DME for engine misfire and/or mixture adaptations. CAUSE The vehicle has lost fuel system delivery pressure due to a loose or split fuel line inside the fuel tank. The failure is related to an unfavorable stacking of tolerances between the rubber fuel hose and the plastic regulator nipple or deterioration of the rubber hose construction material.
- 10151079SI B13 03 15 February 2016 Fuel Systems Technical Service This Service Information bulletin supersedes SI B13 03 15 dated March 2015 and replaces SI B13 04 13 dated March 2014. SUBJECT N20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error. The current version of the ETK incorporates multiple part number errors for the Bosch type injectors. Ordering the injectors by VIN number or manual identification in ETK may result in an incorrect part number.
- 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10151028"This Service Information bulletin supersedes SI B65 69 06 dated June 2008. designates changes to this revision SUBJECT Airbag Warning Lamp Illuminated, FC 93EB or FC 55 . The red airbag warning lamp (AWL) in the instrument cluster is illuminated and a fault code for ""Emergency call function..."" is stored in the MRS5 (Multiple Restraint System) control module. The fault code is FC 93EB for the E90 and E91 or FC 55 for the X3. The fault occurs regardless of whether the vehicle has a TCU (Telematics Control Unit) or not. Internal varistor fault within the MRS control module."
- 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
- 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
- 10150381Junction Box Pin Assignment Change. When replacing the Junction Box (fuse box) using P/N 61 14 6 978 270 or later, note that various pin assignments have changed. The following additional work procedure is necessary to properly perform this repair.
- 10150365"N51, N52K and N52T: Idle Fluctuation During Engine Warm-up Phase. After a cold engine start, the idle speed may be unstable or start fluctuating up and down slightly while the vehicle is stopped. On vehicles with automatic transmissions, roughness or shuddering may be felt during this warm-up period when diving away slowly in ""D"" or in ""R"" without depressing the accelerator pedal. No relevant errors are stored in the DME fault code memory, and these symptoms are no longer present once the engine is at operating temperature (> 90C). Unfavorable DME software"
- 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
- 10150329Intermittently the trunk lid does not pop open when using the remote, or latch when closing. If the vehicle is driven and the trunk is not closed fully, a Check Control message will be displayed in the instrument cluster. CAUSE The trunk lid is out of tolerance. When opening or closing the trunk lid, the latch rubs against the striker because of insufficient clearance.
- 10150324?SI B51 15 08 Body Equipment October 2012 Technical Service. This Service Information bulletin supersedes SI B51 15 08 dated July 2008. designates changes to this revision SUBJECT Rear Window False Anti-trap Activation. INFORMATION The anti-trap protection feature may be activated when no obstruction is present. This may occur at either one or both of the rear windows. The root cause of the false anti-trap activation may be difficult to determine. The attached diagnosis flowchart has been developed to assist with determining the actual root cause of the failure as well as to help prevent unnecessary part replacements. The root cause is typically either an issue with the window system, or an electrical/software issue. The diagnosis flowchart will help ensure that repairs are only carried out for the system that is most likely at fault. Refer to B511508_Attachment. PARTS INFORMATION Refer to the Electronic Parts Catalog (EPC) for the appropriate parts noted in the diagnostic flowchart. WARRANTY INFORMATION Not applicable.
Every BMW 330I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.