2017 BMW 330I

Owner complaints

What owners report most

1. Engine20
2. Unknown or other11
3. Electrical system4
4. Seat belts4
5. Engine and engine cooling3
6. Vehicle speed control2
7. Power train2
8. Service brakes1
9. Steering1
10. Air bags1

Latest complaints

• Oct 20, 2026MD
  Seat belts

  The seat belt sensor will continuous goes off even though the seat belts are engaged/fastened. I have reported this issue to the dealership multiple times with no resolution.

• Apr 7, 2026CA
  Unknown or other
  The defect has left the driver stranded several times and required multiple tows due to the vehicle becoming unsafe and inoperable. On one occasion, the vehicle broke down after a 2.5-hour drive away from home and had to be towed because the overheating and coolant leak issue made it unsafe to…

  The defect has left the driver stranded several times and required multiple tows due to the vehicle becoming unsafe and inoperable. On one occasion, the vehicle broke down after a 2.5-hour drive away from home and had to be towed because the overheating and coolant leak issue made it unsafe to continue driving. The vehicle is operated in a region where summer temperatures frequently exceed 115°F, which significantly increases the safety risk associated with repeated overheating and roadside disablement. The issue remains unresolved and continues to pose an ongoing safety risk due to sudden overheating and loss of reliable vehicle operation. There are multiple dates started mid 2023 through today 4-6-2026 , still overheating after failed attempts

• Nov 21, 2025MI
  Engine

  The cooling system is continually failing prematurely. Parts that should be lifetime are needing to be repaired below 100K miles. I have had to repair the following cooling system related items that should be under recall and are not Oil filter housing Thermostat housing Turbo coolant lines Water neck the cost of repairs is significant and BMW is denying responsibility for the premature failures.

• Sep 30, 2025NC
  Engine
  The Oil Filter Housing (OFH), the Coolant/Water Pump, and other plastic lines for the cooling systems are well known to fail with this engine early in their lifetime. My service advisor at BMW said, "these are very common issues for a B46 engine.". The Motor Mounts also are extremely prone to…

  The Oil Filter Housing (OFH), the Coolant/Water Pump, and other plastic lines for the cooling systems are well known to fail with this engine early in their lifetime. My service advisor at BMW said, "these are very common issues for a B46 engine.". The Motor Mounts also are extremely prone to failure due to the use of the Auto Start/Stop feature. This has also been noted by my service advisor at BMW. They commented, "these cars come in often before ever hitting 20k miles and needing replacement. I recommend never using the Auto Start/Stop feature ever again.'

• Jun 4, 2025FL
  Exterior lighting
  The contact owns a 2017 BMW 330I. The contact stated that the rear driver’s side taillight cover loosened and detached but was able to be put back in place. Upon investigation, the contact discovered NHTSA Campaign Number: 19V074000 (Exterior Lighting); which the contact linked to the failure. The…

  The contact owns a 2017 BMW 330I. The contact stated that the rear driver’s side taillight cover loosened and detached but was able to be put back in place. Upon investigation, the contact discovered NHTSA Campaign Number: 19V074000 (Exterior Lighting); which the contact linked to the failure. The dealer was notified of the failure and the contact was informed that there were no recalls on the VIN related to the failure. The vehicle was not repaired. The dealer referred to the contact to the NHTSA Hotline to report the failure. The manufacturer was not notified of the failure. The failure mileage was unknown.

• May 22, 2025OH
  Engine
  My BMW has had multiple repairs (3 incidents - 2 times repaired by BMW and 1 time repaired by a national mechanic garage) to the coolant system since I purchased it in 2018. BMW have verified the leaking coolant as well as the independent garage. Currently, the coolant system has another on going…

  My BMW has had multiple repairs (3 incidents - 2 times repaired by BMW and 1 time repaired by a national mechanic garage) to the coolant system since I purchased it in 2018. BMW have verified the leaking coolant as well as the independent garage. Currently, the coolant system has another on going issue where it is still leaking and it's still unable to be fixed. This coolant issue has had catastrophic failures at times and more recently it has thrown a major engine overheating warning that has impacted the safety of my wife, kids and I as well as other individuals on the road as I have had to pull over quickly and turn the car off to allow the engine to cool down. I've had to drive the car at a reduce speed and acceleration which has frustrated many drivers causing them to over take me dangerously. Additionally, I've burnt my hand from opening the coolant expansion tank to add coolant on multiple occasions.

• Apr 21, 2025CA
  Engine
  I noticed coolant leaking from under the vehicle. The message to add coolant was displayed. The vehicle was taken to an independent mechanic where the engine was inspected, and was notified of stains of coolant coming from the head gasket. The contact was informed that the head gasket needed to be…

  I noticed coolant leaking from under the vehicle. The message to add coolant was displayed. The vehicle was taken to an independent mechanic where the engine was inspected, and was notified of stains of coolant coming from the head gasket. The contact was informed that the head gasket needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. I believe this is failure is related to NHTSA Campaign Number: Recall 18V755000, October ,24 2018, My car has only 73000 Miles

• Apr 15, 2025CA73,000 mi
  Engine and engine cooling
  The contact owns a 2017 BMW 330I. The contact stated that while the vehicle was parked, upon inspecting the vehicle, the contact noticed coolant leaking from under the vehicle. The message to add coolant was displayed. The vehicle was taken to an independent mechanic where the engine was inspected…

  The contact owns a 2017 BMW 330I. The contact stated that while the vehicle was parked, upon inspecting the vehicle, the contact noticed coolant leaking from under the vehicle. The message to add coolant was displayed. The vehicle was taken to an independent mechanic where the engine was inspected, and the contact became aware of stains of coolant coming from the head gasket. The contact was informed that the head gasket needed to be replaced. The vehicle was not repaired. The contact stated there was a software update performed on the rearview camera. The manufacturer was notified of the failure but offered no assistance. The contact related the failure to NHTSA Campaign Number: 18V755000 (ENGINE AND ENGINE COOLING); however, the VIN was not included in the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was 73,000.

• Apr 2, 2025FL
  Engine and engine cooling
  The contact owns a 2017 BMW 330I. The contact stated while driving at an undisclosed speed, the low coolant warning light illuminated. The vehicle was taken to an independent mechanic, who determined that the vehicle was consuming and excessive amount of coolant. The contact stated that the coolant…

  The contact owns a 2017 BMW 330I. The contact stated while driving at an undisclosed speed, the low coolant warning light illuminated. The vehicle was taken to an independent mechanic, who determined that the vehicle was consuming and excessive amount of coolant. The contact stated that the coolant reservoir was empty after being refilled the previous morning. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 18V755000 (Engine and Engine Cooling); the VIN was included, and the vehicle was already repaired under the recall. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was unknown.

• Mar 10, 2025CO
  Engine

  Oil filter housing and or oil cooler failed. Leaking internally and externally. May cause fluid to leak on to hot engine and cause potential fire or short circuit wiring.

• Feb 18, 2025TN
  Engine

  UNKNOWN, it has problems with stalling and starting up could be issues with the internal drive system that I’ve seen other types of similar models of bmw having these recall issues as well. When starting up after fueling up it over exerts the engine trying to start up. You kind of have to rev it to start it up. And driving it after that it has trouble keeping a solid drive.

• Feb 13, 2025MI
  Unknown or other

  2 low coolant warnings within 4 months ended up being an oil filter housing failure, leading to oil and coolant mixing and leaking. This failure could have lead to catastrophic engine damage. An ASE certified shop is doing the repair for around $2,950.

• Dec 6, 2024CA
  Engine
  The vehicle had a recall on the engine coolant valve line which was taken care of by BMW dealership on November 1, 2024. In less than a month later, an issue has been noted of coolant leak which caused the engine to overheat causing a safety issue on the road while driving my kids to school. The…

  The vehicle had a recall on the engine coolant valve line which was taken care of by BMW dealership on November 1, 2024. In less than a month later, an issue has been noted of coolant leak which caused the engine to overheat causing a safety issue on the road while driving my kids to school. The service manager advised that the issue is not part of the open recall that was already done on November 1st. How can a recall for the same concern of coolant leak and engine over heat cover only one hose where the issue could be related to another hose connection?

• Oct 28, 2024CO
  Engine
  This is my second BMW 3 series. Both of my BMW 3 series have flaws in cooling system. Within 7-year of purchase, it has more than 7 leaking issues. In 2019, it has water pump issue In 2020 it has evaporative emissions vent purge valve issue In 2022, it has cooling system hoses leaks In 2023, it has…

  This is my second BMW 3 series. Both of my BMW 3 series have flaws in cooling system. Within 7-year of purchase, it has more than 7 leaking issues. In 2019, it has water pump issue In 2020 it has evaporative emissions vent purge valve issue In 2022, it has cooling system hoses leaks In 2023, it has cylinder head leak In 2024, it has coolant leaks, oil filter leaks, and front struts leaks. All these are related to a failed cooling system and overheating engine.

• Sep 14, 2024CT
  Engine
  In November of 2023 I was driving my vehicle on the highway when my vehicle's control panel notified me the engine was over heating and I needed to stop driving the vehicle immediately. All the engine coolant had leaked from my vehicle. I had to pull over on the highway and have my vehicle towed.…

  In November of 2023 I was driving my vehicle on the highway when my vehicle's control panel notified me the engine was over heating and I needed to stop driving the vehicle immediately. All the engine coolant had leaked from my vehicle. I had to pull over on the highway and have my vehicle towed. My mechanic identified the problem as the coolant vent line and made the repair. Total cost was $2,052.16 including the tow. A few months later a message from BMW came up on my vehicle's computer display saying there was an "Important recall or campaign", a service action for the exact repair I paid $2,052.16. They now refuse to reimburse me because it is not labeled a "recall". This issue is widespread and needs to be labeled a recall for consumers. A known defect since 2022 that I was never notified prior to the incident and now they refuse to reimburse me for a know defect in their product. I believe this violates my rights under federal consumer protection laws. Please help the consumers and force BMW to label this safety issue a recall and stop hiding behind their euphemisms

• May 21, 2024NY
  Service brakes
  There is a well known issue with the clip on BMW 3 series (mine is a 2017 330i) that holds the parking brake cable assembly to the body if the car above the drive shaft towards the rear of the car. The plastic clips fail frequently, causing the parking brake cable assembly to fall and the brake…

  There is a well known issue with the clip on BMW 3 series (mine is a 2017 330i) that holds the parking brake cable assembly to the body if the car above the drive shaft towards the rear of the car. The plastic clips fail frequently, causing the parking brake cable assembly to fall and the brake lines rub against the driveshaft creating a metal-to-metal noise. Over time the friction between the drive shaft and parking brake cable will eventually create failure of the cable in my opinion. I have this issue and I have seen several online videos of others who have the same issue.

• May 6, 2024GA
  Air bags · Seat belts · Seats

  Passenger restraint system malfunction just came out of the blue. In the morning it was fine, in the afternoon when I went out to my car it threw this error. Other cars in the 5 and X series with the sport seats I have were also recalled for this same issue, but there is no recall for my car. Please help!

• Apr 8, 2024MI
  Engine

  Persistent Low coolant warning issue, Coolant leak was discovered to be coming from Oil filter housing. This is a $3000 repair on something that should last at least as long as the engine. If there are others with this problem, Then maybe a recall is due. Dealer is repairing now at my expense.

• Mar 11, 2024VA
  Unknown or other
  In October of 2023. I notice low coolant notification came on screen. checked coolant saw it was low. Added Coolants. 3 days later same notification. Took vehicle to Shop who stated the coolant cap seal was broken, so I had them replace the coolant cap. 3 days later the same Low coolant light…

  In October of 2023. I notice low coolant notification came on screen. checked coolant saw it was low. Added Coolants. 3 days later same notification. Took vehicle to Shop who stated the coolant cap seal was broken, so I had them replace the coolant cap. 3 days later the same Low coolant light came back. Every few days I had to put coolant in my vehicle. I went through 2 bottles of coolant. Over the Christmas holiday Dec/2023. I dropped my vehicle off at a shop. The oil filter housing and cooler gaskets was bad. BMW replaced this piece from a metal part with a plastic piece. This is my only vehicle and I had to pay for this expensive repair so I could get back and forth to work. Prior to me having the repair done, when I was trying to figure out the problem. I noticed a lot of online information of the same issues for 2017 BMW 330I. THe shop . did the repair told me he had done about 10 of these repairs for the same Year/Make and Model.,the past few months. I had to pay $2,637.20 for this repair. There is clearly a notable problem with coolant leaks. I make sure I have vehicle serviced when the notifications come on the screen and have documentation to show this. Please look into this issues.

• Feb 6, 2024CA
  Engine
  BMW B48 engine. Coolant started leaking and the engine overheated. Unbeknownst to me caus the bottom of the car is covered. I had a mechanic look at it. Found the leak coming from the "oil filter housing unit". When he removed it it was broken at one of the 6 ports inside with the pieces missing…

  BMW B48 engine. Coolant started leaking and the engine overheated. Unbeknownst to me caus the bottom of the car is covered. I had a mechanic look at it. Found the leak coming from the "oil filter housing unit". When he removed it it was broken at one of the 6 ports inside with the pieces missing presumably fell into the interior of the engine. BMW manufactured these units out of a composite material and not aluminum I assume to save costs and weight. This composite material has failed in many of their engines including the mini cooper. When I looked on line googling it I was shocked at how wide spread it was. It's a costly repair about 2000-2500 for parts and labor. This composite material is also used in their failing water pumps all the failing coolant hose connectors and more I believe.

• Feb 1, 2024TX
  Engine
  The plastic oil filter housing assembly developed a crack as we all should know heat and plastic do not do well with each other. Cause my coolant at first to slowly leaked and never gave me a warning of low coolant. Driving 60+ mph then all of a sudden cars goes into limp mode so the person behind…

  The plastic oil filter housing assembly developed a crack as we all should know heat and plastic do not do well with each other. Cause my coolant at first to slowly leaked and never gave me a warning of low coolant. Driving 60+ mph then all of a sudden cars goes into limp mode so the person behind me lucky swerved to the left to avoid hitting me. So filled up coolant and same thing happens again about a week later. No visible leaks no dashboard warning of low coolant levels. So I fill up and go. Mind you my engine is already overheating when it tells me on dashboard while going into limp mode at the same time so continuously overheating engine seems to cause more problems water pumps starts leaking and pipes start developing holes. Safety comes into play while driving down a highway when car goes into limp mode causing the driving that’s not paying attention ram into you. Quite a few safety concerns. Never had a chance or opportunity to pull over to self diagnose, car goes into limp mode with no warning. There are several thousands of this reporting the same with oil filter housing assembly. As I am writing this my mechanic is in the process of taking the part off and replacing it with a metal one. This first happened around thanksgiving 2023 and progressively got worse with each week

• Dec 27, 2023PA
  Engine
  Coolant Leak from oil filter housing caused a major repair. The Car has about 109,000 miles. Parked it after work on a Thursday went to drive it to a family dinner Friday, i turned the car on and immediately get a low coolant light. I drove 2 miles down the road, Suddenly the coolant started…

  Coolant Leak from oil filter housing caused a major repair. The Car has about 109,000 miles. Parked it after work on a Thursday went to drive it to a family dinner Friday, i turned the car on and immediately get a low coolant light. I drove 2 miles down the road, Suddenly the coolant started pouring out and the coolant light comes on again, i return home and have to take my girlfriends car. On the invoice it states, “entire oil filter housing part was replaced”, the plastic used to seal in the coolant had either been destroyed or broken off, not a gasket but a piece from the oil filter housing part. The dealer charged $4500 for the repairs, which they said were “optional” but the engine couldn’t hold coolant. This item is not on the recommended service list, as it’s not an item listed for “wear and tear” However the B48/58 engines are so new that finding enough over 100K miles is not easy to replicate the issue, although message boards have recently discovered this issue occurring with more regularity. Please investigate and help consumers who potentially could be left stranded by this defect.

• Aug 7, 2023CA
  Engine
  Coolant Leak caused a major repair. The Car has about 90,000 miles. Suddenly the coolant started pouring out. As you see in the attached invoice, entire heat exchanger, water pump, and other several parts were to be replaced. The dealer first estimated the repairs at $5,400 and they agreed to do…

  Coolant Leak caused a major repair. The Car has about 90,000 miles. Suddenly the coolant started pouring out. As you see in the attached invoice, entire heat exchanger, water pump, and other several parts were to be replaced. The dealer first estimated the repairs at $5,400 and they agreed to do it at warranty price rates. However, we believe other BMW models have had similar recalls for Coolant leak and suspect same on this model too. Please investigate and help consumers who are ending up paying exorbitant amounts to service shops. BMW may be hiding this problem from NTSB to avoid recalls by agreeing to repair at vehicle warranty rates.

• Dec 25, 2022AL
  Engine · Unknown or other

  out of nowhere with only 1 day warning car requested coolant refill. After refill within 10 minutes car engine ran hot and completely stopped on the expressway. I’ve read hundreds of reviews online and youtube where this exact same thing has happened to others with this same car.

• Dec 13, 2022CA55,000 mi
  Engine
  The contact owns a 2017 BMW 330I. The contact stated that while driving at an undisclosed speed, an unknown warning light illuminated. The vehicle was towed to the dealer where it was diagnosed that an unknown rubber hose needed to be replaced. The vehicle was repaired; however, the failure…

  The contact owns a 2017 BMW 330I. The contact stated that while driving at an undisclosed speed, an unknown warning light illuminated. The vehicle was towed to the dealer where it was diagnosed that an unknown rubber hose needed to be replaced. The vehicle was repaired; however, the failure recurred. The contact stated that the coolant light was illuminated. The contact stated that the oil housing base was replaced; however, a week later, the vehicle started to overheat. The vehicle was taken back to the dealer where it was diagnosed that the engine failed, and the cylinder and head gaskets needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and the contact was informed that the vehicle was out of warranty. The failure mileage was approximately 55,000.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Desiccated Air Bag Inflator Rupture

  EA21002Opened Sep 17, 2021Open
  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…

  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11008102For this vehicle, the EVAP systems purge (vent) valve limited warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles, from the original 10 years/120,000 miles, as determined from the original in-service date. This coverage is subject to the same vehicle eligibility requirements, limitations, and exclusion criteria that apply to the BMW New Vehicle Limited Warranty. Vehicles that are registered in California or a State that has fully adopted the State of California PZEV(SULEV) emission regulation (State of registration, model, and model year dependent), the emission-relevant coverage for this component is 15 years/150,000 miles.
• 10249437The basic conditions for initializing the power windows are not met.
• 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
• 10245365Pressure control valve (pcv) extended ltd wty 15 years/150,000 miles
• 10245364Diesel fuel injectors: ltd wty extension to 10 years/120,000 miles
• 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
• 10238081Upon opening and closing the tailgate, a creaking/groaning sound can be heard from tailgate actuator.
• 10235205The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via the Voice over LTE (VoLTE) function. For this purpose, the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance, and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
• 10235202Exterior rear lights do not work.
• 10230722After an automatic engine start (MSA start), the transmission intermittently goes into the Park "P" or Neutral "N" position without any customer influence.
• 10230717For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in-service date.
• 10227568According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present.
• 10225128Due to a production error, the telematics control units were delivered without an IMS configuration.
• 10225126Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.
• 10225115Customer is unable to power up or charge accessories through a plug adapter inserted in the front 12-volt power socket plug. Alternatively, it will only operate when constant downward hand pressure is maintained.
• 10218384Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.
• 10218380On these Plug-in Hybrid Electric Vehicles (PHEV), the air conditioning cycles from cold to warm air while driving or while at a standstill. The vent outlet temperatures vary by 25 degrees Fahrenheit or more (38 F to 60 F+; 3 to 15+ Celsius) without changing any climate control settings. A difference may be felt in cooling power compared from left to right. In some cases, the air conditioning may have stopped blowing cold air altogether. A rattling noise may also be heard coming from the electrical coolant condenser (EKMV).
• 10218378A rattling/droning noise is heard in the vehicle interior when the air conditioning (AC) is activated. Vibrations are felt in the driver's footwell.
• 10218369Whistling noise is heard coming from the front bumper while driving at highway speeds.
• 10218367Starting mid-May 2022, the QR code on the tite sidewalls of Pirelli tires has been omitted due to patent reasons.
• 10215746Component specific limited warranty extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle Nitrogen Oxide (NOx) Sensor(s) to: 10 years/120,000 miles as determined by the vehicle original in-service date.
• 10215031Shipping specific non-deployed vehicle safety devices to lighting resources, LLC
• 10215026Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks for
• 10215025Shipping specific non-deployed vehicle safety devices to lighting resources, llc. This service Information bulletin provides information on shipping "specific" noin-deployed vehicle safety devices that are classified as Dangerous Goods (DG) to Lighting resources, LLC
• 10214990The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (as of 7/2012 production). This uses map North America NEXT. The Headunit High 2 (HU-H2), also called NBT-EVO, superseded the NBT HU and was introduced in 3/2014. This uses map North America EVO. The Headunit High 4 (HU-H4, also called MGU21) superseded the MGU starting with certain MY2021 vehicles with option code 6U3 Live Cockpit Professional. This uses map North America JOY. The ENTRY Media/Navigation (HU-B) is the low line business version of the navigation system and was introduced in 3/2014. This uses map North America ROUTE. The ENTRY NAV EVO (HU-B2) replaced Entry Media/Navigation as the low-line business version and was introduced in certain MY2018 vehicles. This uses map North America WAY.
• 10214944Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC73 must appear in the text of your TEC claim.
• 10214256The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
• 10212788The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
• 10212780Component and Issue Specific Limited Emission Warranty Extension. This bulletin is notice of a limited emission warranty extension. This is NOT a notice of a Recall or Service Action. There is no immediate repair required unless the BMW vehicle is currently experiencing this problem. Customer Notification Letter Even though this is NOT a Recall, BMW NA is sending VIN-specific customer notification letters. The plastic fuel tank has two openings, one at the top right and the other at the top left. The top right opening (passenger's side, serviceable) provides a mounting point and repair access to the intake fuel pump/level sensor assembly. The top left opening (driver's side, non-serviceable) serves as an access point for the installation of the suction jet pump/level sensor assembly during the fuel tank manufacturing process. After these components are installed, the top left side opening is then permanently closed and sealed with the installation of a circular Coex biopolymer plastic cover plate which is welded into place. Over time, the left side opening plastic cover plate weld may become damaged. Should this occur, there is the possibility of fuel leakage. Additionally, your vehicle will store the corresponding fault codes that may also be generated, and the Malfunction Indicator Lamp (MIL) will illuminate.
• 10212779Component and Issue Specific Limited Emission Warranty Extension. This component-specific limited emission warranty extension applies to defects in materials or workmanship.
• 10205068Customer may complain of reduced air flow when the air conditioning system is operated for an extended time, usually longer than 30 minutes.
• 10203340Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle,when turning the steering wheel.
• 10203338The trunk lid/hatch does not open fully when unlatched with remote or hands-free operation.
• 10200489TELEMATICS UNIT RETROFIT TO 4G CELLULAR TECHNOLOGY: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
• 10200487TELEMATICS UNIT DEACTIVATION DUE TO 3G CELLULAR TECHNOLOGY DISCONTINUATION: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
• 10200249The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022. The decision to phase out 3G network technology was made at the discretion of the respective cellular carriers and lies beyond the control of BMW. Due to the phase-out, BMW Assist and ConnectedDrive services will no longer be supported after this date.
• 10200238Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle, when turning the steering wheel.
• 10200228On rare occasions during an engine oil service, the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing.
• 10199292B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.
• 10198899B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.

Every BMW 330I model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.