2019 BMW X2

Recalls

1 recall names the 2019 BMW X2. Newest first.

• Steering › Linkages › Tie rod assembly

  Aug 14, 2019NHTSA 19V60100032 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2018-2019 BMW X1 sDrive28i, X1 xDrive28i, 2019 X2 xDrive28i, MINI Cooper S Convertible, Countryman, and John Cooper Works Countryman vehicles. The steering gear tie rod may have been assembled incorrectly, which may result in excessive wear of the tie rod end, eventually causing it to break.

  Risk and remedy

  Risk

  A broken steering tie rod would lead to a loss of vehicle control, increasing the risk of a crash.

  Remedy

  BMW will notify owners, and dealers will inspect the vehicles and replace the tie rods and ball joints as necessary, free of charge. The recall began October 11, 2019. Owners may contact BMW customer service at 1-800-525-7417 or MINI customer service at 1-866-825-1525.

  Full recall details →

Owner complaints

What owners report most

1. Engine2
2. Electrical system1
3. Exterior lighting1
4. Vehicle speed control1

Latest complaints

• Aug 11, 2026NJ
  Electrical system · Engine
  On 6/12/2024, my right engine mounts collapsed and needed immediate repair to keep the engine secure. On 7/6/2026, I took my car for service and was informed via video that the right engine mounts had collapsed again and required replacement. I repeatedly explained to the dealership that the mount…

  On 6/12/2024, my right engine mounts collapsed and needed immediate repair to keep the engine secure. On 7/6/2026, I took my car for service and was informed via video that the right engine mounts had collapsed again and required replacement. I repeatedly explained to the dealership that the mount installed on 6/12/2024 only lasted about 27,000 miles. The service center then had a team leader take a look and said to disregard what the video shows of a collapsed mount; that it's only cracking and that can wait. The dealership refused to cover the cost of the mounts, instead charging me a discounted rate, claiming that the warranty was only for two years, despite my car not providing any service notifications. It appears that engine mount issues are a common and serious problem on BMWs.

• Jan 11, 2024CA
  Exterior lighting
  My battery died. After a AAA jump, the car started fine but the right-rear-taillight-signal malfunctioned. It was working fine prior to the battery dying. I purchased a new battery and the mechanic said my right-rear-taillight was getting an electrical signal and the bulb work, but I needed a…

  My battery died. After a AAA jump, the car started fine but the right-rear-taillight-signal malfunctioned. It was working fine prior to the battery dying. I purchased a new battery and the mechanic said my right-rear-taillight was getting an electrical signal and the bulb work, but I needed a completely new taillight component ($300!) because it still was not working. While researching parts, I came across a YouTube 'fix' that showed that within the lightbulb compartment, there was a little piece of plastic that was MELTED preventing a mental piece on the lightbulb casing from touching the metal on the compartment preventing the light from coming on. My mechanic sanded down the melted plastic so the two metal parts could touch, and low and behold, the right-rear-taillight-signal worked just fine. Now I don't know if a battery failure could cause an electrical shock to this little piece of plastic but in the comments on this Youtube "fix", this same scenario happed to someone else with an X2 and their battery died and the right-rear-taillight-signal immediately failed. Is there a connection? What caused that little piece to melt??

• Oct 12, 2019DC800 mi
  Engine · Vehicle speed control

  The M35I turbo malfunctions and results in a 1-3 second lag that produces a very dangerous driving situation. You press the accelerator and the car doesn't move for a few seconds then all of a sudden it bursts ahead explosively.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11000578Evap system purge (vent) valve ext ltd wty (elw) 15/150
• 10252135After performing a BMW Remote Software Upgrade (RSU), the functionality of the Comfort Access andPassive Go/Exit features may be reduced. Also, one or more of the following error memory entries below may be stored in the Basic Central Platform(BCP) module. 80424A Remote control receiver at the front (FBD5 VM): Programming defective 80424B Remote control receiver at the rear (FBD5 HM): Programming defective 80424C Remote control receiver at the front left (FBD5s VL): Programming defective 80424D Remote control receiver at the front right (FBD5s VR): Programming defective 80424E Remote control receiver at the rear right (FBD5s HR): Programming defective 80424F Remote control receiver at the rear left (FBD5s HL): Programming defective
• 10252033During inspection and/or diagnosis there is noticeable dirt/grease buildup on the axles near the inner and/o router CV boots.
• 10249435Customer complains of a musty odor or damp front footwell carpet.
• 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
• 10242874Customers may be experiencing one or more of these following issues with Bluetooth operation: Bluetooth cannot be switched on or off in the head unit (HU-H4) Paired mobile devices cannot be deleted Customer is unable to make phone calls or stream music with mobile device Customer is unable to connect a new mobile device via Bluetooth Mobile device does not automatically reconnect via Bluetooth in the next drive cycle (after short sleep cycle)
• 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
• 10238081Upon opening and closing the tailgate, a creaking/groaning sound can be heard from tailgate actuator.
• 10235205The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via the Voice over LTE (VoLTE) function. For this purpose, the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance, and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
• 10235192The buttons on the gear selector switch (GWS) do not work, or the function indicator lighting has failed.
• 10235183While driving on rough roads, a knocking sound can be heard coming from top of the instrument panel (aka dashboard) in the bulkhead area.
• 10228428During load reversal or taking off from a stop, there is a creaking or droning noise heard from the lower engine area.
• 10228427During a vehicle inspection and/or while addressing a customer's concern, the engine stabilizer bar/link appears to be worn.
• 10218420The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via Voice over LTE (VoLTE) function. For this purpose the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
• 10218373Any or all of these conditions may be present: A. The exterior rearview mirror glass is discolored or cracked B. The power windows and folding mirrors may not operate C. One or more of the following LIN bus faults are stored in the BDC (Body Domain Controller): Faulty exterior rearview mirror electronics have created a short on the LIN bus, damaging the mirror glass and causing functional errors in power window and exterior mirror operation.
• 10215752The following complaints may be noticed while slow maneuvering with a steering input of 80-100% (at or near full lock, e.g., parking lot maneuvers) or accelerating with a medium to large steering angle: Humming or creaking noises from the rear area, slight vibrations also noticeable from the driver's seat. The vehicle may also jerk slightly.
• 10214989Mist formation on the windshield inside surface may occur at departure or after MSA (automaticstart/stop). Acoustic abnormality in the area of the recirculated air flap (recirculation flap closing and opening severaltimes). The above may occur individually or in combination.
• 10212796The Check Control message "Door open" appears in the instrument cluster (Kombi) even though all vehicle doors are closed and locked. The locking operation of the doors is not affected.
• 10212525Customer complains of musty odor or damp front footwell carpet.
• 10206685Any or all of the following CCM ID code 14/15/16/17 "door open" appear in the instrument cluster when the door is properly closed and locked. The locking operation of the door is not affected by the incorrect display.
• 10204657Different air temperatures are felt from left to right out of the front fresh air grilles (air vents).
• 10201145Different air temperatures are felt from left to right out of the front fresh air grilles (air vent). The following fault code is saved in the IHKA (integrated automatic heating/air conditioning system) control unit: 801189 - Engine mixed air right: Initialization fault.
• 10200246Customer states the Central Information Display is flickering and the picture is shifting.
• 10188944LIN BUS FAULTS WITH EXTERIOR REARVIEW MIRROR GLASS DAMAGE: Faulty exterior rearview mirror electronics have created a short on the LIN bus, damaging the mirror glass and causing functional errors in power window and exterior mirror operation.
• 10184587Water Ingress In Footwell Area From A/C Condensate Drain: Water Ingress In Footwell Area From A/C Condensate Drain. Customer complains of musty odor or damp front footwell carpet.
• 10184584Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full: Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full.There are no faults stored in the system for the washer fluid level switch.
• 10182921CONDENSATION FROM AIR CONDITIONING LEAKS INTO PASSENGER FOOTWELL: Condensation from the air conditioning systems evaporator drips, below the instrument panel, into the passenger's footwell. During assembly, the cover of the fresh air intake was not fully seated when the screws were tightened. This cover can then leak condensation out through the existing gap.
• 10182920BUZZING NOISE IS HEARD WHEN AIR CONDITIONING IS DEACTIVATED: A buzzing noise is heard when the air conditioning (A/C) is deactivated while the vehicle is in park or neutral. Prior to turning off the A/C, the system was functional and cooling properly. A/C compressor, or The power supply to the A/C compressor is too low.
• 10182622CONDENSATION FROM AIR CONDITIONING LEAKS INTO PASSENGER FOOTWELL: Condensation from the air conditioning systems evaporator drips, below the instrument panel, into the passenger's footwell. During assembly, the cover of the fresh air intake was not fully seated when the screws were tightened. This cover can then leak condensation out through the existing gap.
• 10182621BUZZING NOISE IS HEARD WHEN AIR CONDITIONING IS DEACTIVATED: A buzzing noise is heard when the air conditioning (A/C) is deactivated while the vehicle is in park or neutral. Prior to turning off the A/C, the system was functional and cooling properly. A/C compressor, or The power supply to the A/C compressor is too low.
• 10181224SERVICE ACTION - PROGRAM THE BODY DOMAIN CONTROL (BDC) UNIT: Aftermarket scan tools cannot read fault codes in the Dynamic Stability Control (DSC) unit via the On-Board Diagnostic (OBD) socket. The DSC data is not processed correctly in the BDC and therefore cannot transmit any diagnostic requests via the OBD using aftermarket scan tools.
• 10179813DELIVERY STOP - OBD ACCESS IN DSC CONTROL UNIT: Aftermarket scan tools cannot read fault codes in the Dynamic Stability Control (DSC) unit via the On Board Diagnostic (OBD) socket. The DSC data is not processed correctly in the BDC and therefore cannot transmit any diagnostic requests via the OBD using aftermarket scan tools.
• 10179009NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier.
• 10178996TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving.
• 10176377CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER: A yellow CCM (Check Control Message) ID 415 is displayed- "Increased battery drain! // Battery. Electrostatic discharge at standstill / start engine. Energy management" The results of the Energy Diagnosis test plan identifies the Controller as the root cause of the CCM. The Controller delays the vehicle going to sleep by up to 6 minutes. In some cases this will cause the CCM 415 to be displayed when starting the vehicle. Replacing the Controller in this case will not correct this situation.
• 10176370LIN BUS FAULTS WITH EXTERIOR REARVIEW MIRROR GLASS DAMAGE: Any or all of these conditions may be present: A. The exterior rearview mirror glass is discolored or cracked B. The power windows and folding mirrors may not operate C. One or more of the following LIN bus faults are stored in the BDC (Body Domain Controller): D90C03 LIN bus master B: short circuit - BDC D90C04 LIN bus master B: No communication - BDC D90C05 LIN bus master B: Communication failed - BDC D90D07 Operating facility switch block (LIN): Missing LIN slave D90D0A exterior rearview mirror left (LIN bus): Absent LIN slave - BDC D90D0D exterior rearview mirror right (LIN bus): Absent LIN slave - BDC 804246 exterior rearview mirror left (LIN bus): Heating or electrochrome: faulty - BDC 804256 exterior rearview mirror right (LIN bus): Heating or electrochrome: faulty - BDC 804265 exterior mirror left or right: Excess temperature - BDC 804260 exterior mirror left or right: Overvoltage - BDC 804261 exterior mirror left or right: Undervoltage - BDC Faulty exterior rearview mirror electronics have created a short on the LIN bus damaging the mirror glass and causing functional errors in power window and exterior mirror operation.
• 10176363TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME. All models: FC 191C02 - Fuel tank ventilation system 2nd discharge point: malfunction FC 195014 - Differential pressure sensor tank vent valve signal: fixed FC 118001 - Mixture control: mixture too lean FC 118401 - Mixture control: mixture too lean large deviation I01 only: FC 124103 - Mixture control: mixture too lean FC 124101 - Mixture control: Mixture lean large deviation CAUSE Internal mechanical defect in the tank ventilation valve. The defect can also result in a very loud clicking noise when the valve is cycling.
• 10176362ROUGH RUNNING IMMEDIATELY AFTER A COLD START: Immediately after a cold start the engine may run roughly during the catalyst heating period. Depending on the severity of this situation the malfunction indicator lamp (MIL) can be illuminated and the following fault code may be set: Fault code Control module Fault code text 151001 DME Ignition angle adjustment while idle speed cold start: ignition angle early In some circumstances if the vehicle is switched into a drive gear (R or D) when the RPM are low the engine may switch off. Should this occur the engine may be restarted normally. Software error in the DME.
• 10174320CONNECTEDDRIVE/BMW ASSIST SYSTEM DIAGNOSIS INFORMATION: This Service Information Bulletin (Revision 7) replaces SI B84 02 14 dated May 2019. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information Bulletin: Is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. Will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.
• 10174032AUTOMATED ACTIVATION OF NAVIGATION SYSTEM DURING PDI/QC1: This Service Information Bulletin (Revision 2) replaces SI B65 22 14 dated October 2015. The INITIAL NAV enabling code no longer needs to be pre-ordered through the Parts department! When the vehicle is connected to the diagnostic system ISTA to perform PDI/QC1 the step to activate the navigation system (part of Delete Transport Mode) will automatically request the INITIAL NAV enabling code (VIN-specific) without pre-ordering the enabling code. This enabling code will be automatically delivered through ISTA and it then activates the navigation system.

Every BMW X2 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.