2000 Chrysler Sebring
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Chrysler › Sebring › 2000
These records cover every 2000 Chrysler Sebring. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2000 Chrysler Sebring. Newest first.
Import products IS recalling 30,351 fuel filters sold to and branded by the affinia group as carquest p/n 86523, napa p/n 3523, and wix p/n 33523 for use as replacement equipment on the vehicles listed above. these filters may develop a leak in the hose assembly and/or connectors due to improperly adhered line connectors.
Risk and remedy
Risk
This condition may result in a vehicle fire.
Remedy
The affinia group will notify owners and the filters will be replaced free of charge. the safety recall began on august 1, 2009. owners may contact wix filter return center at 1-704-869-7411 or import products at 1-508-279-8207.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Certain airtex fuel pump module assemblies, p/n e7081h, sold for use as replacement equipment for the vehicles listed above. the wall of the flared fitting of the fuel pump IS not thick enough to prevent the mating threaded fittings from bottoming out before an adequate seal IS achieved. this condition may result in leakage of fuel at the connection of…
Risk and remedy
Risk
In the presence of an ignition source, a fuel leak could result in a fire.
Remedy
Airtex will notify owners and replace the fuel pumps free of charge. the recall IS expected to begin during july 2007. owners can contact airtex automotive at 800-880-3056.
Certain tigas fuel pump modules manufactured between june 1 and september 24, 2006, sold under various brand names and p/nos. these fuel pump modules are sold as aftermarket for use in certain daimlerchrysler vehicles listed above. silicone material used in manufacture of the flapper valve was out-of-specification, leading to excess swell of the flapper…
Risk and remedy
Risk
Fuel restriction could result in loss of power and/or engine stall, possibly resulting in a vehicle crash.
Remedy
Ti automotive will notify owners and replace the defective fuel pump modules free of charge. the recall began on october 6, 2006. owners may contact ti automotive toll-free at 1-877-461-1834.
Certain tradesonic combination lamps sold as replacement lamps for use on the above listed passenger vehicles. combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.
Remedy
Tradesonic will notify owners and replace the lamps free of charge. the recall IS expected to begin during july 2006. owners may contact tradesonic at 626-934-8884.
Vehicle description: passenger vehicles. if the rubber boots on the lower lateral arm ball joints of the front suspension were damaged during assembly, dirt and water can intrude. also, mmc has added the potential of leaking moisture, which can cause the ball stud to corrode.
Risk and remedy
Risk
This condition could cause the lower lateral arm ball joint to separate, increasing the risk of a vehicle crash. this campaign supercedes mmc's previous safety recall campaign, see 99v-066.
Remedy
Dealers will inspect the lower lateral arm ball joint for wear. ball joints that exhibit wear beyond the established tolerance will be replaced with newly designed lateral arm ball joints. ball joints that are within the established tolerance will be cleaned and a special sealant will be applied to prevent intrusion of moisture.
Owner complaints
93 complaints14 involved a crash3 involved a fire11 injuries
What owners report most
Latest complaints
- Steering · Suspension · Wheels
I was driving my car and fault something wrong with the steering and went to make a right turn I heard a noise and my car front passenger side of my car was on the ground and my wheel was under my car. Thank goodness for no one else being involved that day and thank God I wasn't hurt badly... I…
I was driving my car and fault something wrong with the steering and went to make a right turn I heard a noise and my car front passenger side of my car was on the ground and my wheel was under my car. Thank goodness for no one else being involved that day and thank God I wasn't hurt badly... I have never seen or have anything like that to happen to me... I'm glad my children wasn't with me... I'm glad I wasn't traveling down the road when that happened.....
- Steering · Suspension · Wheels
was driving down the road with no warning car popped and made loud noise.. the left front of the car dropped down and steering was un responsive and came to a stop made a clunking sound when trying to move it out of road but was unsuccessful...
- Forward collision avoidance › Automatic emergency braking · Service brakes
this is a test
- Steering · Structure › Body · Suspension
I was not informed of a recall and me and my son were in the vehicle driving and it started hopping almost as if it had hydraulic. I told my son to fasten his seat belt considering we were just leaving the store and pulling onto a busy highway. It continued to wobble and I sped up to get off the…
I was not informed of a recall and me and my son were in the vehicle driving and it started hopping almost as if it had hydraulic. I told my son to fasten his seat belt considering we were just leaving the store and pulling onto a busy highway. It continued to wobble and I sped up to get off the hwy and then hen the jumping real high and hard began I was going maybe 45 mph and the axle or ballpoint had snapped causing the car wheel to lock up and cause me to run in the ditch luckily no one was harmed but we were very interested much so shaken up.. I had no issue out of that tire or ball joint before and I am needing to know what I need to do to start my investigation... Me and my son are happy no one was injured too bad. *tr
- Seat belts
Seatbelt locks up to where u can't put it on before driving or when driving and seatbelt IS on it sometimes locks up and you can't move your locked in place while driving. While driving if it locks up it can happen anywhere on any road or freeway it's malfunctioning and it's annoying especially…
Seatbelt locks up to where u can't put it on before driving or when driving and seatbelt IS on it sometimes locks up and you can't move your locked in place while driving. While driving if it locks up it can happen anywhere on any road or freeway it's malfunctioning and it's annoying especially when u have to be somewhere and you can't get your seatbelt to work making me drive without it on.. Since I bought the car 4 years ago it's been doing this
- Wheels
II took my car in to have the tires rotated and I was told I need new tires. My tires have only 20K miles and a 60K mile warranty. The tire shop called falken was given the run around for over a week by the manufacturer. I consulted online forums and checked w/ several tire shops and was told that…
II took my car in to have the tires rotated and I was told I need new tires. My tires have only 20K miles and a 60K mile warranty. The tire shop called falken was given the run around for over a week by the manufacturer. I consulted online forums and checked w/ several tire shops and was told that the falken ziex 912'S had wear problems and that falken had cut the warranty to 40K miles and they wouldn't sell them. Consumer reports highly recommended them in 2010 which IS why I bought them. many people online only had them last a few months and one lady I recall 6 months and all got no held or relief from falken. why weren't these recalled and pulled from sale? falken told the dealer I would need to buy new tires and then they'd consider maybe reimbursing me a small amount. I am disabled on a fixed income and cannot do this and I do not trust falken or their brand. I need tires for my car now and don't know what to do.
- Electrical system
TL* the contact owns a 2000 chrysler sebring. The contact stated that the vehicle stalled while driving and the anti-theft security system light illuminated after the failure occurred. The contact also stated that at initial start up, the anti-theft security system light illuminated and caused the…
TL* the contact owns a 2000 chrysler sebring. The contact stated that the vehicle stalled while driving and the anti-theft security system light illuminated after the failure occurred. The contact also stated that at initial start up, the anti-theft security system light illuminated and caused the engine to stall. The vehicle was not taken to the dealer to have a diagnostic performed. The vehicle was not repaired. The manufacturer was not made aware of the failure. Vin was not available. The failure and current mileage was 15,000.
- Electrical system
Car horn keeps going off at random times, while driving and not driving. Looked up on internet and very well known issue, part IS extremely expensive, only alternative IS to pull fuse for horn out, but in doing so the air bags are also disabled. *Tr
- Steering · Suspension
There was a recall that began on january 28, 2011 for bad ball joints. I bought the car in dec 2010 in between recalls 2009 -2011. Never got a recall notice for this. On november 16 th 2012 my ball joint broke my car went out of control almost hit two phone poles had my family in the car.…
There was a recall that began on january 28, 2011 for bad ball joints. I bought the car in dec 2010 in between recalls 2009 -2011. Never got a recall notice for this. On november 16 th 2012 my ball joint broke my car went out of control almost hit two phone poles had my family in the car. Likely we were not hurt or killed. Chrysler needs to step up and fix my car for putting bad ball joints on it . This IS not the first time there was a recall on this in 2001-2009-2011 can you please help me to have chrysler fix my car. *tr
- Steering · Suspension
There a recall on 10-13-2009 for bad ball joints. I bought the car in 12-2010 never got a recall notice on ball joints. on nov-16-2012-we were driving with my 9 yr old and 10 year old with no warning the ball joint broke on driver side wheel . Car went out of control we almost hit two phone…
There a recall on 10-13-2009 for bad ball joints. I bought the car in 12-2010 never got a recall notice on ball joints. on nov-16-2012-we were driving with my 9 yr old and 10 year old with no warning the ball joint broke on driver side wheel . Car went out of control we almost hit two phone poles the car went into a field. The wheel IS now hanging off car not driveable. Nobody was hurt it could of been worse. Will chrysler still have honor this recall to fix my car being the recall was 3 yrs ago if I knew there was a recall I would of had this fix. *tr
- Wheels › Lugs/nuts/bolts/studs
2000 chrysler sebring, unit 1 was traveling westbound on the ohio turnpike in the left lane. the right front wheel fell off the right front axle of unit1 causing damage to the right front fender. *bf (ohio traffic crash report # 10-0306-90).*jb
- Air bags · Steering · Visibility › Power window devices and controls
TL* the contact owns a 2000 chrysler sebring. The contact stated that the driver and passenger windows became stuck closed. The window regulator failed and the contact was unable to open the windows. The steering wheel would also shock the contact intermittently when staring the vehicle. In…
TL* the contact owns a 2000 chrysler sebring. The contact stated that the driver and passenger windows became stuck closed. The window regulator failed and the contact was unable to open the windows. The steering wheel would also shock the contact intermittently when staring the vehicle. In addition, the contact stated that the air bags were visible through the dashboard. The contact stated that the air bags could independently deploy at any time and as a precaution, the front passenger seat was no longer being used. The vehicle was taken to the dealer thirteen times. The dealer advised that the vehicle was not under recall and any repairs would be at the contacts expense. The manufacturer would not provide any assistance. the vehicle was not repaired. The failure mileage was 92,500.
- Air bags · Equipment › Recreational vehicle/trailer · Steering
Yes I , have a 2000 chrysler sebring and I bought it when it had 20,000 miles on it and have had several issues that concern me about driving the car. the steering wheel has shorts in it to where most of the time the horn and other stuff don't work on it. the second issue IS that the passenger airbag IS about to pop it has came out alot and at any time the airbag can pop. *Tr
- Suspension › Front › Control arm › Lower ball joint
TL* the contact owns a 2000 chrysler sebring. the contact stated while driving 30 mph, the front passenger side lower ball joint fractured. The contact was unable to drive the vehicle and it was towed to the dealer where the lower ball joint was replaced. the contact stated that the lower ball…
TL* the contact owns a 2000 chrysler sebring. the contact stated while driving 30 mph, the front passenger side lower ball joint fractured. The contact was unable to drive the vehicle and it was towed to the dealer where the lower ball joint was replaced. the contact stated that the lower ball joint was replaced one year ago for the same failure that occurred while braking from 5 mph. The manufacturer was not contacted. the failure mileage was 110,000.
- Air bags
Tl*the contact owns a 2000 chrysler sebring. The contact was driving approximately 55 mph on normal road conditions. The "air bag" warning light indicator illuminated on the instrument panel intermittently. The vehicle was taken to an authorized dealer. technician stated that the diagnostic charge was $90. The vehicle has not been repaired for the malfunction. The failure mileage was 80,000.
- Seat belts
Tl*the contact owns a 2000 chrysler sebring. the contact stated that the safety belt cable failed on the vehicle. as a result, the seat belt would not latch. the dealer stated that the failure was due to natural wear and tear on the vehicle; therefore, they would not assume responsibility for…
Tl*the contact owns a 2000 chrysler sebring. the contact stated that the safety belt cable failed on the vehicle. as a result, the seat belt would not latch. the dealer stated that the failure was due to natural wear and tear on the vehicle; therefore, they would not assume responsibility for the repairs. the repair would cost over $200. the vehicle has not been repaired. the failure and current mileages were less than 85,000. Updated 09/14/09. *Lj updated 09/15/09.*jb
- Power train › Automatic transmission · Steering › Linkages › Tie rod assembly
Tl*the contact owns a 2000 chrysler sebring. while driving between 45-50 mph, the contact heard a loud rattling noise coming from the front end of the vehicle. unexpectedly, the vehicle began to steer in one direction without assistance. the contact was required to exert greater force to turn…
Tl*the contact owns a 2000 chrysler sebring. while driving between 45-50 mph, the contact heard a loud rattling noise coming from the front end of the vehicle. unexpectedly, the vehicle began to steer in one direction without assistance. the contact was required to exert greater force to turn the steering wheel. the vehicle was pulled over to the side of the road and resumed normal operation. the vehicle was inspected and repaired by a certified mechanic, who stated that the failure was related to the tie rod ends. the tie rod ends were replaced on two separate occasions and recently failed. in addition, the contact heard a loud noise coming from the transmission when accelerating. the vehicle has not been repaired. the failure mileage was 28,000 and current mileage was 65,700.
- Structure › Body › Trunk lid
Tl*the contact owns a 2000 chrysler sebring convertible. the contact stated that the trunk occasionally drops down due to unsteadiness. on one occasion, the trunk landed on her head. the trunk was repaired and IS working properly; however, the contact feels that the failure could recur at any moment. the current mileage was 70,000 and failure mileage was 60,000. Updated 02/02/09. *Lj updated 02/03/09. *Jb
- Seat belts
Tl*the contact owns a 2000 chrysler sebring. the contact stated that the front driver and passenger side seat belt retractor mechanisms would not release properly. there was no warning light illuminated on the instrument panel. the contact stated that the failure was related to the seat belt…
Tl*the contact owns a 2000 chrysler sebring. the contact stated that the front driver and passenger side seat belt retractor mechanisms would not release properly. there was no warning light illuminated on the instrument panel. the contact stated that the failure was related to the seat belt control timer. he was concerned of the safety risk involved. the vehicle has not yet been taken to an authorized dealer for repair. the failure mileage was 90,000 and current mileage was 96,000.
- Air bags · Seats
I was in a 3 car collision and my airbag did not deploy. I was the middle car. I was waiting on the car in front of me to turn left. I was hit by a 3RD car going 55-60mph from behind making me the car in front of me. All 3 cars were totaled. My seat also broke loose causing me to go forward even more. I did have my seatbelt on. *Tr
- Suspension › Front › Control arm › Lower ball joint
Tl*the contact owns a 2000 chrysler sebring. when the vehicle was started or while driving at any speed, the contact heard a grinding and squeaking noise underneath the vehicle. a mechanic stated that the front ball joints needed to be replaced. nhtsa campaign ID number 00v21002…
Tl*the contact owns a 2000 chrysler sebring. when the vehicle was started or while driving at any speed, the contact heard a grinding and squeaking noise underneath the vehicle. a mechanic stated that the front ball joints needed to be replaced. nhtsa campaign ID number 00v21002 (suspension:front: control arm:lower ball joint) was referenced. the vehicle was taken to the dealer in may of 2001 and was inspected for the safety recall at that time, but no repair was made. the failure mileage was 56,184. updated 05/05/08. *lj the consumer would like to be reimbursed for the ball joints, that were recalled.. Updated
- Structure
I have owned my sebring for 5 years and two years ago the clear coat started to dissipate. I have noticed every black sebring has the same problem. *tr
- Electrical system · Engine and engine cooling › Engine · Power train › Automatic transmission
Tl*the contact owns a 2000 chrysler sebring. the engine completely shut off without warning while driving at any speed. the contact stated that the vehicle restarted after approximately four seconds, but ran normally as long as the transmission was engaged. the dealer never inspected the…
Tl*the contact owns a 2000 chrysler sebring. the engine completely shut off without warning while driving at any speed. the contact stated that the vehicle restarted after approximately four seconds, but ran normally as long as the transmission was engaged. the dealer never inspected the vehicle. if the contact unpluged the computer, and then pluged it back in the vehicle will restart normally. the current and failure mileage were 110,000.*ak
- Suspension › Front › Control arm › Lower ball joint
I was driving my car and it started making a real loud squeaking noise like the front end was coming out from under it. I took it in and got a couple of quotes on it. all 3 of the mechanic's told me I needed to get my lower ball joints & control arm changed. both the passenger and the driver…
I was driving my car and it started making a real loud squeaking noise like the front end was coming out from under it. I took it in and got a couple of quotes on it. all 3 of the mechanic's told me I needed to get my lower ball joints & control arm changed. both the passenger and the driver side of my car were bad. I had never gotten a recall notice in the mail. I have owned this car for over 2 years. finally I took it in on monday, july 3, 2006 and had to replace both sides. it ended up costing me over $475.00 for parts and service. *nm
- Tires · Tires › Pressure monitoring and regulating systems
Despite having a tire shop investigate the slow leak in my tires, no cause was found for a continuous slow leak. Every time I use the car I need to re-inflate at lease one of the tires. *nm
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Safety belt cinching latch plate
There are no injuries or fatalities associated with this alleged defect.while conducting this investigation, odi found that the subject cinches meet the load bearing requirements of federal motor vehicle safety standard 208, and that many of the reported failures were due to incorrect child safety seat installations.…
There are no injuries or fatalities associated with this alleged defect.while conducting this investigation, odi found that the subject cinches meet the load bearing requirements of federal motor vehicle safety standard 208, and that many of the reported failures were due to incorrect child safety seat installations. Additionally, the report rate IS low (1.60/100k).the information available fails to establish the existence of a defect trend at this time.further allocation of agency resources to this issue IS unwarranted and the preliminary evaluation IS being closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10229256KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10221686KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10220489Valve Body. These may cause over drive cycling.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 1021645482212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10191460Valve Body. These may cause over drive cycling.
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10130081Return: Wiring Assy - Engine You have been identified as either having stock, or have stock in transit to your dealership. Please return stock packaged before 2016/07/31 (31 July, 2016)of follow ing part numbers:68176457AF, 68176459AF. Please return suspect parts back to your facing depot using Return Code 02, before 13 September, 2016.
- 1013008005182535AD - Lamp Assy ?Tail Light LT You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 05182535AD . See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.
- 10130079Inspect and Return: Trim Cover Assy - A-Pillar Rt/Lt You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part numbers: 1ZA04DX9AE, 1ZA05DX9AE. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.
- 10129047Warranty Operations Newsletter Updates from Warranty Operations
- 10129046Warranty Operations Newsletter Updates from Warranty Operations
- 10129045CBXDP361AA Return: Spacer Kit - Visor You have been identified as either having stock, or have stock in transit to your dealership. Please return stock of part number CBXDP361AA. Replacement part number is CBXDP361AB w hich is in stock and available for order. Please return suspect parts back to your facing depot using Return Code 02, before 16 September, 2016.
- 101290441NT30XDVAC - Inspect and Return: Panel - Instrument Panel You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 1N T30XDVAC. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
- 10129043Inspect and Return: Solenoid Module - Transmission You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of follow ing part numbers:52120000AA, 52119435AF, 05078709AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
- 10129042Return: Lamp Assy - CHMSL& Cargo Light You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of follow ing part numbers:55372082AE, 55372082AD, 55372082AC, 55372082AB, 55372082AA. Replacement part number is 55372082AF w hich is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
- 10129041P/N CBSZR068AA: Inspect & Return: Module Kit - Occupant Restraint You have been identified as either having stock, or have stock in transit to your dealership. Please return part number CBSZR068AA as per the QIR attached. Replacement part can be obtained by ordering the same part number (CBSZR068AA) Please return suspect parts back to your facing depot using Return Code 02, before 02 September, 2016.
- 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10121832Wiper If Mopar OE wipers are unavailable, the below alternatives can be offered instead. 05066964A$ = WBRW0011A$ 05066973A$ = WB000019A$ or WBF00019A$ 05096134A$ = WB000027A$ or WBF00028A$ 55154762A$ = WB000013A$ 68001330A$ = WB000019A$ or WBF00019A$ 05012611A$ = WB000021A$ or WBF00021A$ 05102881A$ = WBRW0011A$
- 6092304Subject regarding non-deployed airbag handling procedures.
- 634272Flash programming failure recovery. *Slc
- 623153Exhibiting rough idle, hard start and start & stall.*cls
- 621898Automatic transmission fluid usage ATF+4.
- 620066Subject regarding generic scan tool (gst), publication no. 81-170-00008 provided with this technical service bulletin to provide reference information when using generic scan tool on obdii vehicles.
- 620059Subject regarding airbag / clock spring service for various models including 2002 model year jeep liberty.
- 618049Subject regarding wire splice repairs.
- 616720Information on new components and a repair procedure developed to replace failed seat slide motors.
- 612602Concerns with the instrument cluster gauge pointers on wrong side of pointer stops.
- 612178Subject on vehicles experiencing door cladding loose or falling off. *Mjs
- 610014Some vehicles may exhibit a condition where the butyl used for holding the door weather shield in place drips from the lower door edge.
- 609995This bulletin provides a revised wire splice procedure and related parts.
- 609988Subject regarding misdiagnosed leak detection pump systems with diagnostic trouble codes p1494, p0442 p0455, or p0456.
- 608363Subject regarding twisted seat belts.
- 607959This bulletin announces the availability and installation of a resuable automatic transmission oil pan gasket.
- 607916Technical service bulletin regarding multi-layer steel (mls) head gasket installation procedures.
Every Chrysler Sebring model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.