2010 Chrysler Sebring
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Chrysler › Sebring › 2010
These records cover every 2010 Chrysler Sebring. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2010 Chrysler Sebring. Newest first.
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Chrysler 200, 2010 Chrysler Sebring, 2010-2012 Dodge Caliber and 2010-2014 Jeep Patriot, Compass and Dodge Avenger vehicles. The Occupant Restraint Control (OCR) module may short circuit, preventing the frontal air bags, seat belt pretensioners, and side air bags from deploying in the event of…
Risk and remedy
Risk
If the frontal air bags, seat belt pretensioners, and side air bags are disabled, there is an increased risk of injury to the vehicle occupants in the event of a vehicle crash that necessitates deployment of these safety systems.
Remedy
Chrysler will notify owners, and dealers will replace the OCR, free of charge. Interim letters informing owners that parts are not available yet were mailed on October 26, 2016. The recall began on August 15, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S61.
Chrysler IS recalling certain model year 2010 chrysler sebring, 300, charger (LX) and dodge challenger (LC), avenger (js), and journey (jc), as well as model year 2011 dodge RAM light duty pickup (DS) vehicles. some of these vehicles may experience a separation at the crimped end of the power steering pressure hose assembly.
Risk and remedy
Risk
Leaked power steering fluid onto hot engine components could cause a fire.
Remedy
Dealers will inspect and replace as necessary the power steering pressure hoses free of charge. the safety recall began on december 20, 2010. owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling certain model year 2010 chrysler sebring; dodge avenger and nitro; jeep liberty, commander and grand cherokee; and model year 2009-2010 dodge RAM truck. these vehicles may have been built with an improperly formed or missing brake booster input rod retaining clip.
Risk and remedy
Risk
This could result in brake failure without warning which could cause a crash.
Remedy
Chrysler will replace the brake booster input rod retaining clip free of charge. the safety recall IS expected to begin during february 2010. owners may contact chrysler at 1-800-853-1403.
Owner complaints
86 complaints7 involved a crash5 involved a fire2 injuries
What owners report most
Latest complaints
- Air bags · Electrical system
The horn IS not working and the airbag light IS on, diagnosed as broken clockspring.
- Air bags · Unknown or other
On 6/22/24 I made a left turn, stopped to park. I shifted the gear into reverse and heard a loud pop sound then smoke start coming from underneath the driver side of the hood. I put the car into park and lifted the hood, there were flames on the driver side of the car. The fire department was contacted and put the fire out. The car is totaled.
- Fuel/propulsion system · Seat belts · Steering
The steering wheel got stiff and hard to turn making turning a struggle. The shifting gears slipped and locked in place. The electronic throttle is is indicating a problem. These are just a problem over some time.
- Air bags
The contact owns a 2010 Chrysler Sebring. The contact stated that while the vehicle was idling, the air bag warning light illuminated. The vehicle was taken to the dealer however, the vehicle had not yet been diagnosed. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 85,000.
- Air bags · Seat belts
Air bag light stays on at all times and it put fear of safety issue is a wreck is to happen. Driver seatbelt light doesn’t go off, it’s as though when putting the belt on even though it’s latched it isn’t and causes the warning light to stay on.
- Seats
The driver seat has a part that wears out and causes the power seat to move forward and backward on its slide track. eventually the part will fail and the seat will slide right into the steering wheel which will impact the drivers chest. The power seat has two acme threaded rods that drive the…
The driver seat has a part that wears out and causes the power seat to move forward and backward on its slide track. eventually the part will fail and the seat will slide right into the steering wheel which will impact the drivers chest. The power seat has two acme threaded rods that drive the seat rails forward/ backwards to allow driver to adjust the seat. the acme rods drive a custom screw block to allow the motion. when in static position only the screw block holds the seat and stops it from moving forward and backward. from what i can observe the acme rod is case hardened but the screw block is not. the screw block seems to wear out prematurely after four years. if left unaddressed the screw block could fail completely and allow the seat and passenger to hit the steering wheel while braking or in a front end collisdion.
- Air bags
The contact owns a 2010 Chrysler Sebring. The contact stated that while starting the vehicle, the air bag warning light was illuminated. The vehicle was taken to the dealer, and the dealer performed a recall repair under NHTSA Campaign Number: 16V668000 (Seat Belts, Air Bags). The dealer informed…
The contact owns a 2010 Chrysler Sebring. The contact stated that while starting the vehicle, the air bag warning light was illuminated. The vehicle was taken to the dealer, and the dealer performed a recall repair under NHTSA Campaign Number: 16V668000 (Seat Belts, Air Bags). The dealer informed the contact that the recall was not related to the failure. The vehicle was then taken to an independent mechanic who diagnosed that an unknown part of the driver's side air bag needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 101,462.
- Engine · Service brakes
My son was driving forward up a hill. While driving the car started rolling backwards while in drive gear. Then while the vehicle decided to roll backwards in drive gear he was unable to stop. Since my son was unable to stop he put the car in park the vehicle still continue to roll backwards. As a…
My son was driving forward up a hill. While driving the car started rolling backwards while in drive gear. Then while the vehicle decided to roll backwards in drive gear he was unable to stop. Since my son was unable to stop he put the car in park the vehicle still continue to roll backwards. As a result my son jumped out of the vehicle and the vehicle rolled down the hill and hit a tree and boulders. Had the vehicle towed to the dealership and they found nothing wrong. However a witness seen what was happening to my son in disbelief. This vehicle IS very unsafe for anyone to drive,
- Engine
Jumped to mining chain at 159,000 miles I don't understand how or why .
- Engine
Driving vehicle on interstate with no warning car lost speed, stalled then shut off. Would not start back up. Vehicle tut owed to license mechanic and engine pistons was broken. Engine blew up without signs. Less than 64,000 miles.
- Air bags · Seat belts · Steering
1. Sensor lights are on. 2. Seatbelts get stuck. 3. Horn doesn't work. 4. Sensor IS on for the back left rear tire.
- Electrical system · Engine · Power train
TL* the contact owns a 2010 chrysler sebring. The contact stated while driving at an undisclosed speed, the throttle body warning message illuminated and the vehicle stalled. The vehicle was towed to an independent mechanic who replaced the electronic throttle body, alternator and sensor however…
TL* the contact owns a 2010 chrysler sebring. The contact stated while driving at an undisclosed speed, the throttle body warning message illuminated and the vehicle stalled. The vehicle was towed to an independent mechanic who replaced the electronic throttle body, alternator and sensor however, the failure recurred. The vehicle was taken to another independent mechanic and diagnosed with a low voltage failure, and a defective engine control module which needed to be replaced. The vehicle was not repaired. An unknown dealer and the manufacturer were notified of the failure. The failure mileage was 95,000. The vin was not provided.
- Engine · Power train
TL* the contact owns a 2010 chrysler sebring. While making a turn, the vehicle shut off and the check engine indicator illuminated. The vehicle was placed in park and restarted. The dealer and manufacturer were not contacted. The failure recurred, but was not diagnosed or repaired. The failure mileage was approximately 300,000.
- Engine
The car died on the road while I was making the turn and when I went out to see what happened the car left a trail of clearish fluid. Keep in mind that my car has only 73,000 miles on it
- Air bags
Takata recall - there hasn't been one on this vehicle. will there be a recall??
- Air bags
TL* the contact owns a 2010 chrysler sebring. The contact stated that the air bag warning indicator illuminated. The vehicle was taken to westbury jeep eagle chrysler plymouth (100 jericho turnpike, westbury, ny 11590, 516-333-2666), but was not diagnosed or repaired. The manufacturer was contacted and did not assist. The failure mileage was 70,000.
- Service brakes
TL* the contact owns a 2010 chrysler sebring. While driving 35 mph, the contact had to depress the brake pedal multiple times to stop the vehicle. The contact was able to drive at slow speeds to his residence. The vehicle was taken to an independent mechanic where it was diagnosed that the brake…
TL* the contact owns a 2010 chrysler sebring. While driving 35 mph, the contact had to depress the brake pedal multiple times to stop the vehicle. The contact was able to drive at slow speeds to his residence. The vehicle was taken to an independent mechanic where it was diagnosed that the brake booster needed to be replaced. The contact stated that the failure was associated with nhtsa campaign number: 10v009000 (service brakes, hydraulic). The local dealer was not notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified. The failure mileage was 118,000.
- Electronic stability control (esc)
Periodic loss of throttle control. Throttle light will come on usually while idling at a stop, car starts shaking, will not accelerate. Almost got into a wreck. I have two kids with me in the car. I thought it was safe because throttle body was replaced and didnt have problems for a couple weeks since then! Mechanics cant even figure out the problem.
- Electrical system
Takata recall-my electronic throttle and throttle petal IS not working. It stopped working on monday as I was driving home. As I was driving home coming down glenwood avenue in raleigh. All of a sudden, I was not able to give gas to the car and the car slowed down almost causing an accident since…
Takata recall-my electronic throttle and throttle petal IS not working. It stopped working on monday as I was driving home. As I was driving home coming down glenwood avenue in raleigh. All of a sudden, I was not able to give gas to the car and the car slowed down almost causing an accident since we were driving at a certain speed. I had to get in the right lane and coast to the light and turned the corner to park the car to find out what was going on. I had to get my brother to drive behind me as I coast home not able to give the car gas because it was not working. My car IS currently at the mechanic around the corner from my home and a diagnostic has been done on the car and I was told that I needed an electronic throttle and a throttle petal replaced. I keep everything on my car care up to date. I seen a recall on my vehicle for the electrical system but was told that that information IS incorrect for my car. I need an investigation down on this since this IS an electrical issue. Please get back with my with this information. I was able to take a picture of the error message that came up on the dashboard.
- Power train · Vehicle speed control
Check engine light came on and I started having erractic shifting, codes came back as po755, p0700, p0716, p1607. This vehicle's transmission will not shift. I have taken to numerous shops half of them say it the pcm the other say it needs a transmission replacement. I have had the shift solenoid b…
Check engine light came on and I started having erractic shifting, codes came back as po755, p0700, p0716, p1607. This vehicle's transmission will not shift. I have taken to numerous shops half of them say it the pcm the other say it needs a transmission replacement. I have had the shift solenoid b replaced by dealership only for them to charge me then tell me it need a transmission replacement. The vehicle will still drive forward and backward but will not shift gears at all. losses acceleration every so often then harsely goes back into gear while in motion. Rpm IS very high but will still drive.
- Air bags · Seat belts
2010 chrysler sebring. Consumer writes in regards to safety recall 16v-668. *Ld *js
- Air bags
Takata recall while driving my airbag light keeps coming on and going off
- Air bags
Takata recall. I have tried several times to get an appointment for this defect. They schedule me in september 19; 2017. The morning of the appointment before leaving, I gave them a call it was then that I was told the parts did not come in. I have another appointment for december 5 2017. I hope they can repair the problem.
- Air bags · Seat belts
2010 chrysler sebring. Consumer writes in regards to occupant restraint controller safety recall. *Ld the consumer requested information on having a recall completed. Updated 10/04/2017*js
- Air bags
2010 chrysler sebring. Consumer writes in regards to airbag safety recall. *Ld the consumer stated the recall repair exceeded a reasonable amount time. Updated 09/14/2017*js
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10229178Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10228989Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10224887RES / RHA / REB Radios That Support Bluetooth and Hands-Free 1. For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands; DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Hands Free Module (and associated components) are the systems responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis. Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
- 10224693Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10223028Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- 10221831(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- 10221512Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220645Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10219732HVAC Distribution Housing
- 10217736STAR Center News No. 78 - Jan/Feb 2013: Instead of limiting the use of the tether anchor to 48 pounds (child weight) the new guideline states that the tether anchor can be used with a seatbelt to install a child restraint up to the recommended weight limit of the child restraint.
- 10217517Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10217510Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 1021645482212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10216395Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10209647W5A580 (NAG1) Valve Body - complete
- 10189200STAR Center News No. 78 - Jan/Feb 2013: Instead of limiting the use of the tether anchor to 48 pounds (child weight) the new guideline states that the tether anchor can be used with a seatbelt to install a child restraint up to the recommended weight limit of the child restraint.
- 10187688Active Head Restraint (AHR) Inadvertent Deployment - X91 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacinga front seat AHR that has inadvertently deployed. Customers may comment on the following: The AHR is deployed on one or both front seats and will not reset.
- 10187667Warranty Bulletin D-20-21 (X91) Active Head Restraint - Select 2010 Dodge Journey (JC), Dodge Avenger/Chrysler Sebring (JS), Dodge Nitro (KA), Jeep Liberty (KK), Jeep Compass/Jeep Patriot (MK), Dodge Caliber (PM), Dodge Caravan/Chrysler Town & Country (RT) (Rev. A)
- 10187658Warranty Bulletin D-20-21 (X91) Active Head Restraint - Select 2010 Dodge Journey (JC), Dodge Avenger/Chrysler Sebring (JS), Dodge Nitro (KA), Jeep Liberty (KK), Jeep Compass/Jeep Patriot (MK), Dodge Caliber (PM), Dodge Caravan (RT)
- 10184753Active Head Restraint (AHR) Inadvertent Deployment - X84 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
- 10184453Active Head Restraint (AHR) Inadvertent Deployment - X84 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
- 10180221(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10175733Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169246Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10166537RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
Every Chrysler Sebring model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.