2007 Dodge Caliber
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Caliber › 2007
These records cover every 2007 Dodge Caliber. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2007 Dodge Caliber. Newest first.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from…
Risk and remedy
Risk
If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy
Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Chrysler IS recalling certain model year 2007 dodge caliber and jeep compass passenger vehicles manufactured from march 7 through may 19, 2006. the pivot bushings in vehicles with oversized accelerator pedal bearing pockets may become dislodged and potentially cause the accelerator pedal to bind or stick.
Risk and remedy
Risk
Should the pedal bind or become stuck, it can be overcome by smart brakes which override the accelerator pedal in certain conditions.
Remedy
Chrysler will notify owners and dealers will inspect and replace all affected accelerator pedal assemblies free of charge. the safety recall began on june 29, 2010. owners may contact chrysler toll-free at 1-800-853-1403.
Certain passenger vehicles equipped with rear disc brakes fail to conform to the requirements of federal motor vehicle safety standard (fmvss) no. 135, "light vehicle brake systems." the length of the rear wheel hub mounting bolts may prevent actuation of the park brake.
Risk and remedy
Risk
This could allow unintended movement of the vehicle under certain conditions and cause a crash without warning.
Remedy
Dealers will replace the rear wheel hub mounting bolts and repair the park brake free of charge. the recall began on may 8, 2007. owners may contact daimlerchrysler at 1-800-853-1403.
On certain vehicles, the antilock brake system (ABS) control module software may cause the rear brakes to lock up during certain braking conditions.
Risk and remedy
Risk
This could result in a loss of vehicle control and cause a crash without warning.
Remedy
Dealers will reprogram the ABS electronic control unit. the recall began on february 19, 2007. owners may contact daimlerchrysler at 1-800-853-1403.
Owner complaints
884 complaints54 involved a crash18 involved a fire38 injuries
What owners report most
Latest complaints
- Electrical system · Power train · Vehicle speed control
Vehicle tipm shut off transmission while driving an cause a traffic jam on a busy intersection caused the transmission system to go in limp mode an no breaks. Was very dangerous lucky I had a hand break that worked cause engine to shut off an studder had to get towed an transported the vehicle home…
Vehicle tipm shut off transmission while driving an cause a traffic jam on a busy intersection caused the transmission system to go in limp mode an no breaks. Was very dangerous lucky I had a hand break that worked cause engine to shut off an studder had to get towed an transported the vehicle home an got it inspected by a mobile mechanic an says the fuse box had blown internal components due to failing internal electrical components or weak points in the tipm system
- Electrical system · Engine · Service brakes
The contact owns a 2007 Dodge Caliber. The contact stated that the ECU had been hacked. While driving on the highway at 70 MPH, the brakes applied without application, but I was able to move to the right lane. The vehicle was able to pull over safely, and it stalled. While parking with the foot…
The contact owns a 2007 Dodge Caliber. The contact stated that the ECU had been hacked. While driving on the highway at 70 MPH, the brakes applied without application, but I was able to move to the right lane. The vehicle was able to pull over safely, and it stalled. While parking with the foot on the brakes, the vehicle suddenly accelerated and crashed into a small pole. There was no reported fire, airbag deployment, police report filed, or injuries. While in neutral, the vehicle suddenly accelerated. The driver was able to shift to neutral. The vehicle was making an abnormal growling sound. There was no light inside. While using the headlights, the windshield wipers turned on for five minutes. After locking the vehicle, the headlights remain on. While using the turn signal, the windshield wipers engaged without application. While driving in the rain, the vehicle hydroplaned. The contact stated that someone stole the key fob, made copies, hacked into the vehicle, and was controlling the vehicle. The vehicle was taken to an independent mechanic for diagnostic testing, which confirmed the vehicle was working as designed. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The approximate failure mileage was approximately 154,000. The VIN was not available.
- Power train · Structure › Body · Wheels
I was informed on 09/29/2025 by my Chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the…
I was informed on 09/29/2025 by my Chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engine. On this latest failure, I was told the same thing by the shop manager: "If you hit a bump while driving this vehicle you could lose your back wheels". In the first incident, the engine could have fallen out of my vehicle. He was not going to let me drive it home. Then he changed his mind and told me it was "at my discretion". I did drive it home (4.5 miles) with no problem. He told me he was going to try and find a new or used part to fix the issue. He made it clear that he was not hopeful of finding one. This is twice now that my life and the lives of any drivers on the road at the same time were placed in danger from excessive rusting problems. I submitted files in the first incident showing that Chrysler was aware of the issue. A copy of the corporate service bulletin was attached. To my knowledge nothing was ever done. Is anything going to be done this time?
- Suspension
I was at a gas station and attempted to leave the lot and the cradle and/or attached parts broke into, rendering the car undrivable.
- Air bags
The contact owned a 2007 Dodge Caliber. The contact stated while driving at an undisclosed speed, the contact's vehicle was involved in a head-on collision, which was no fault of the contact. The contact's vehicle was damaged to the front of the vehicle and on the passenger's front side of the…
The contact owned a 2007 Dodge Caliber. The contact stated while driving at an undisclosed speed, the contact's vehicle was involved in a head-on collision, which was no fault of the contact. The contact's vehicle was damaged to the front of the vehicle and on the passenger's front side of the vehicle. The contact stated that the other driver's vehicle crashed into the contact's vehicle at a high rate of speed. The air bags did not deploy. The vehicle was towed to a local tow yard. The paramedics and the local Police arrived at the scene. A Police report was filed, however, the report number was unavailable. The vehicle was deemed a total loss. The contact was the only occupant in the vehicle. The contact was transported to the local medical center, however, due to the severity of the injuries and the specific treatments that the contact required, the contact was transferred to a medical center that specialized in the contact's required treatments. The contact-sustained injuries included but were not limited to traumatic brain injury, seizures, impaired speech, physical and mental disabilities, intermittent paralysis, damage to the spinal cord, and amnesia. The manufacturer was not made aware of the failure. The failure mileage was unknown.
- Suspension · Unknown or other · Wheels
My car is at 69739 miles and the control arms and the front and rear subframe is rotted out
- Engine · Structure › Body · Suspension
This is a follow up to complaint #11459461 filed on 4/3/22 at 9:16:43am. I was not able to send documents at that time. Documents included relate to follow up on complaint #11591104. First pdf file: pages 1-4 Service bulletin from Chrysler - my model year not included; pages 5-7 service…
This is a follow up to complaint #11459461 filed on 4/3/22 at 9:16:43am. I was not able to send documents at that time. Documents included relate to follow up on complaint #11591104. First pdf file: pages 1-4 Service bulletin from Chrysler - my model year not included; pages 5-7 service invoice and picture of missing engine cradle pan; page 8 original repair invoice; page 9 copy of original repair invoice with notations for Magna plant manager; page 10 notice of having received complaint; page 11 Defective lug nut issue; page 12 Complaint #11591104; page 13 Service invoice noting replacement of two defective lug nuts. Second pdf file: pages 1-2 Copy of original complaint #11459461; page 3 Copy of towing receipt due to defective lug nut. Third pdf file: Picture of three of four defective lug nut covers that I had to remove due to flat tires. First one not shown due to being damaged while attempting to remove beyond recognition. Upper left lug nut cover came off just in handling of removed lug nuts.
- Air bags · Structure › Body › Door · Visibility › Sun/moon roof assembly
The contact owns a 2007 Dodge Caliber. The contact stated that while it was raining, there was water entering through the sunroof and doors into the vehicle. The air bag warning light was illuminated. The contact called the local dealer, who stated that there were no related recalls for the…
The contact owns a 2007 Dodge Caliber. The contact stated that while it was raining, there was water entering through the sunroof and doors into the vehicle. The air bag warning light was illuminated. The contact called the local dealer, who stated that there were no related recalls for the failures. The vehicle was not diagnosed or repaired. The manufacturer was contacted and stated that there was no recall coverage for the failures and the contact was referred to the NHTSA Hotline to report the failures. The failure mileage was approximately 70,000.
- Vehicle speed control
The contact owns a 2007 Dodge Caliber. The contact received notification of NHTSA Campaign Number: 10V234000 (Vehicle Speed Control) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2007 Dodge Caliber. The contact received notification of NHTSA Campaign Number: 10V234000 (Vehicle Speed Control) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Structure · Suspension
The contact owns a 2007 Dodge Caliber. The contact stated while pulling into a parking space, there was an abnormal sound coming from the rear of the vehicle. The contact stated that upon inspecting the vehicle, he noticed that the subframe was severely rusted and there was a piece of metal hanging…
The contact owns a 2007 Dodge Caliber. The contact stated while pulling into a parking space, there was an abnormal sound coming from the rear of the vehicle. The contact stated that upon inspecting the vehicle, he noticed that the subframe was severely rusted and there was a piece of metal hanging down in the rear of the vehicle. An independent mechanic inspected the vehicle and determined that the subframe needed to be replaced. The mechanic informed the contact that the vehicle was undrivable. The vehicle was not repaired. The dealer was not notified of the failure. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 175,000. The VIN was not available.
- Air bags · Electrical system
The air bag light and sound are going off without any collision or accident type. Just randomly started going off. Airbags have never been deployed and goes off with or without weight on the seats.
- Suspension · Unknown or other
Premature rust on rear subframe
- Suspension
Rusted Subframe!!
- Structure › Body · Unknown or other
The window regulators of this car (& other vehicles of the same model) is a poor product of productivity. The cable wires that hold the window to guide the window up & down are known to & have become tangled up around the component that is said to properly wrap up the guided cable wires in the…
The window regulators of this car (& other vehicles of the same model) is a poor product of productivity. The cable wires that hold the window to guide the window up & down are known to & have become tangled up around the component that is said to properly wrap up the guided cable wires in the correct placement for the windows to continue to be able to roll up & down as intended. It's not just one door, it is literally every single door in this vehicle that has this issue. When I decided to try & save a little bit of money & get some used window regulators, I go to a salvage yard that had another dodge caliber (different model, how ever, same window regulators) just to find upon inspection, that every single door has a spoon in between the window & the rubber guard piece. Took the door panel off to further inspect & that vehicle had the same issue I have at this very moment... Cable wires completely tangled up and completely non salvageable. Removed the spoon & the window fell down. Now I understand that it doesn't sound like a safety issue but when you are driving down the highway, doing the speed limit, and your window falls down, it's very startling and honestly a distraction while driving. Not only is that a distraction but have you ever had a bird fly into your car, from the hole that was once a window? Talk about a distraction. It's like a bee flying into your helmet while riding a motorcycle or 4wheeler. Ah! Main focus is that flying object to come out, so you try to roll down the other windows only to remember after pushing the buttons that, oh wait, they won't roll down. Ever since the window fell, Not only is that a safety issue for the ones in my car, now it's a safety issue for those driving onside of me till I can get onto the shoulder, if there is one. And hopefully the weather is nice Yes, it has been confirmed & inspected by an independent service center, & yes it is available for inspection upon request. No warning lamps.
- Structure › Body · Suspension · Unknown or other
Rear suspension rusted and broke during operation; control arm, tie rod and/or wheel bearings rusted and broke during operation causing vehicle to lose control
- Unknown or other
Massive amount of shaking and vibrating when vehicle is at idle. Subframe is rotting and rusting away and causing rust holes in the subframe. Vehicle is currently in operation daily. Unsafe to operate in its current condition. Will need fixed via recall.
- Service brakes · Suspension
I had my 2007 Dodge Caliber rear brakes replaced today, at 83,487 miles. The service professional noted on the receipt that the “rear subframe is rotting out.” He suggested that I contact Dodge, to find out if there has been a recall regarding this issue. Please advise as to how this problem may be resolved, with no additional, out-of-pocket cost to me, the consumer. Thank you.
- Structure › Body · Suspension
Car has been garage kept entire time of owning. Sub Frame still rotted out causing so much damage to the car, the struts, the tire(s); etc, causing car to shake and tire to bow out. Car has been at a repair shop for over 7 months now trying to get a replacement part to repair it with no luck as of…
Car has been garage kept entire time of owning. Sub Frame still rotted out causing so much damage to the car, the struts, the tire(s); etc, causing car to shake and tire to bow out. Car has been at a repair shop for over 7 months now trying to get a replacement part to repair it with no luck as of yet. This should NOT be the responsibility of the customer. This has been a known issue for many of these vehicles for years now with nothings done or any warnings sent out regarding this issue being a possible hazard.
- Power train · Suspension
Started hearing a loud banging noise whenever i would hit a bump or turn left coming from drivers side tire. after getting home, i checked and the entire subframe is rusted out.
- Power train
The contact owns a 2007 Dodge Caliber. The contact stated while driving 70 MPH, the vehicle stalled. The contact was able to veer to the side of the road. The message "Transmission Overheating" and the ABS warning light was illuminated. The contact restarted the vehicle; however, the vehicle would…
The contact owns a 2007 Dodge Caliber. The contact stated while driving 70 MPH, the vehicle stalled. The contact was able to veer to the side of the road. The message "Transmission Overheating" and the ABS warning light was illuminated. The contact restarted the vehicle; however, the vehicle would not exceed 30 MPH while driving. The contact veered to the side of the road, where the vehicle remained. The local dealer was not notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure but provided no assistance. The failure mileage was approximately 240,578.
- Vehicle speed control
My car was slow to accelerate, and sounded like the engine was over-revving. The engine stalled several times, and the car itself was shaking, while driving at a moderate speed level, which I feared would have caused an accident, because it was sudden. The service warning light appeared. I had the…
My car was slow to accelerate, and sounded like the engine was over-revving. The engine stalled several times, and the car itself was shaking, while driving at a moderate speed level, which I feared would have caused an accident, because it was sudden. The service warning light appeared. I had the manifold replaced by one mechanic, but the problem occurred again. I got a second opinion, that determined it was the throttle body assembly, which was replaced. That was three years ago. Now, the same issue has cropped up again. The cost was exorbitant, and is something I can't afford every few years.
- Structure › Body · Suspension · Wheels
Vehicle has less than 100,000 miles (strictly highway miles) and rear sub frame has completely rusted through causing back alignment to be drastically out, and fish tailing, which also causes hazardous steering control on dry and especially wet roads. Rapid wear and replacement of tires on rear end. I have researched and found this to be a consistent problem on multiple sites and forums.
- Service brakes · Structure › Body · Visibility/wiper
Very bad design of muffler. It IS very dangerous. The muffler has a hole on top. That heat effect the battom trunck, the hood get melted, heat sheild get burned and the road assistant tire get melted as well. I was lucky I was able to smell it. Also all body get very rusted and look hourrible.
- Engine and engine cooling › Exhaust system › Manifold/header/muffler/tail pipe
The contact owns a 2007 Dodge Caliber. The contact stated that after driving approximately a block from her residence, she noticed that the vehicle was unable to exceed 15 MPH while accelerating. The contact stated there was no warning light illuminated. The vehicle was driven back to her residence…
The contact owns a 2007 Dodge Caliber. The contact stated that after driving approximately a block from her residence, she noticed that the vehicle was unable to exceed 15 MPH while accelerating. The contact stated there was no warning light illuminated. The vehicle was driven back to her residence and then the vehicle was towed to an independent mechanic. The contact stated that the vehicle was diagnosed, and she was informed that the intake manifold needed to be replaced. Additionally, the vehicle subframe was rusted. The contact stated that she was informed of an unknown recall however, she was informed that the VIN was not included. Neither the dealer nor the manufacturer was notified of the failure. The approximate failure mileage was 79,000.
- Suspension
Rear subframe is badly rusted making the vehicle unsafe to drive. Don’t know how long it been like this, just noticed it while doing brake work. I’ve owned the car since 2008 and was never notified of the extended warranty.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Sticking Accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will…
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10229843Front And Rear Crossmember Corrosion (X58 10 Years Unlimited Mileage)
- 10229181Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
- 10223602Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10223512THROTTLE BODY For clarification, only use 68414676A$ on 2010 & earlier vehicles as supply is limited.
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10216395Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10191460Valve Body. These may cause over drive cycling.
- 10177457THROTTLE BODY For clarification, only use 68414676A$ on 2010 & earlier vehicles as supply is limited.
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10140065Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10139978Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10138987Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10137036Front And Rear Crossmember Corrosion (X58 10 Years Unlimited Mileage) This bulletin involves inspecting the front and rear crossmembers for perforation / rust through and if necessary, replace the crossmember(s). The customer may describe a vibration at the steering wheel or may have been informed by a technician or state vehicle inspection that the front and / or rear crossmember is severely corroded.
- 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10128948Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10121927NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
- 10064501Summary to be provided on a future date.
- 10055914Mopar: the warrant has been extended on front and/or rear crossmembers for certain vehicles, in salt belt regions, and covers 10 years/unlimited miles and effective immediately. Model 2007 caliber, compass, patriot.
- 10034545Dodge: fuel gauge fluctuation. Fuel gauge IS not accurate or fluctuates at 3/4 of a tank or above. This bulletin involves replacing the fuel sending unit, clocking the fuel module and installing a fuel jumper hose.
- 10025384Flash: mil illumination with dtc p0139 or 02270. This bulletin involves selectively erasing and reprogramming the powertrain control module (pcm).
- 10024966No engine crank or no engine start due to electronic lockup of the wcm/skreem.
- 10024644Flash: mill illumination with dtc p0139 or p2270.
- 10023351Exterior lamp - lens fogging.
- 10021984Steering angle sensor - not initialized/internal.
- 10021983Mil/etc illumination with dtc p2174.
- 10021666Erase and reprogram the gpec power train control module (pcm) with new software.
- 10021248Cracked windshield due to being hit by a foreign object like a stone.
- 10021247Tire pressure monitor system information.
- 10021239Powertrain control module initialization.
Every Dodge Caliber model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.