2012 Dodge Caliber
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Caliber › 2012
These records cover every 2012 Dodge Caliber. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2012 Dodge Caliber. Newest first.
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Chrysler 200, 2010 Chrysler Sebring, 2010-2012 Dodge Caliber and 2010-2014 Jeep Patriot, Compass and Dodge Avenger vehicles. The Occupant Restraint Control (OCR) module may short circuit, preventing the frontal air bags, seat belt pretensioners, and side air bags from deploying in the event of…
Risk and remedy
Risk
If the frontal air bags, seat belt pretensioners, and side air bags are disabled, there is an increased risk of injury to the vehicle occupants in the event of a vehicle crash that necessitates deployment of these safety systems.
Remedy
Chrysler will notify owners, and dealers will replace the OCR, free of charge. Interim letters informing owners that parts are not available yet were mailed on October 26, 2016. The recall began on August 15, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S61.
Owner complaints
49 complaints9 involved a crash3 involved a fire6 injuries
What owners report most
Latest complaints
- Structure › Body
Rear subframe rotted out, detached at tire arm...see many complaints online
- Structure › Frame and members
The contact owns a 2012 Dodge Caliber. The contact stated that there was a rattling noise coming from the front sub frame of the vehicle. The vehicle was taken to a local independent mechanic where it was diagnosed that the sub frame was rusted. The vehicle was not repaired. A local dealer was contacted. The manufacturer was made aware of the failure. The failure mileage was approximately 108,000.
- Suspension · Unknown or other · Wheels
Due to the subframe rusting on the undercarriage of the car, the lower ball joint completely detached from the car, cause the driver side tire to fall off during operation.
- Structure › Body
Front and back subframes of car are/were rusted. The front was replaced last year and the rear needs to be done. I'm waiting for an estimate for that. Pic shows the rust taken by my mechanic 2 weeks ago..
- Suspension · Unknown or other
Frame rotted out
- Electrical system
I recently only had my 2012 dodge caliber for a year now and out of that year it’s been giving me problems since I had it! The car had completely shut down on me for weeks while I was in the process of burying my father in law who gave me Covid after he passed. Weeks later we ended up figuring out…
I recently only had my 2012 dodge caliber for a year now and out of that year it’s been giving me problems since I had it! The car had completely shut down on me for weeks while I was in the process of burying my father in law who gave me Covid after he passed. Weeks later we ended up figuring out what the issue was which was the tipm. I remember having to tap the battery with a wire for it to start and it didn’t matter what the weather looked like. Well that didn’t last long because it broke down on me again after I’ve replaced almost everything there was under the hood; the battery, the alternator, the fuses to the tipm and relay, the brake light switch, the ignition switch and all the fuses. Now here it is I’m making a car payment and still paying insurance for a vehicle I haven’t driven in months. I ended up researching this car and I see these cars are not reliable and I wish I would have known especially with two small children I already have! I recently read that this vehicle was in a dealer auction but never was told why; not once but twice actually. I despise these cars if I knew what I know now I would of never got this vehicle. I still owe 5grand on this car at that so I’m right back at square one but this go round got two extra bills that I waste money in
- Engine · Structure › Body
Subframe on the vehicle at 90,000 was found to have SEVERE huge rotted holes in the subframe that is supporting the engine. This can allow the engine to drop out of the vehicle at any given moment and cost to repair is $1200 which is insane.
- Electronic stability control (esc) · Fuel system, gasoline › Fuel injection system › Throttlebody/manifold
The contact owns a 2012 Dodge Caliber. The contact stated while driving at 15 MPH, the stability and throttle body malfunction indicators warning lights illuminated. The vehicle was taken to an independent mechanic. The vehicle was not diagnosed or repaired. An unknown dealer was notified of the…
The contact owns a 2012 Dodge Caliber. The contact stated while driving at 15 MPH, the stability and throttle body malfunction indicators warning lights illuminated. The vehicle was taken to an independent mechanic. The vehicle was not diagnosed or repaired. An unknown dealer was notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure but did not provide any assistance. The failure mileage was approximately 88,000.
- Structure › Body
Lately I have noticed a wobble when I drive on the highway. Saturday, 07/24/2021, I took my 2012 Dodge Caliber with only 74,753 miles on it to the mechanics for an alignment, rotation and weight balance on the car. This is not my first time at the mechanics and they had seen the car in the Summer…
Lately I have noticed a wobble when I drive on the highway. Saturday, 07/24/2021, I took my 2012 Dodge Caliber with only 74,753 miles on it to the mechanics for an alignment, rotation and weight balance on the car. This is not my first time at the mechanics and they had seen the car in the Summer of 2020 and for inspection November of 2020. The mechanics then took me in to see the car after it was up on the lift which is never a good thing. There is a gaping rusted hole in the frame, I did not think to take a picture but I should have. I have been searching online and found a site listing over 70 reports of rusted frames on Dodge Caliber and all reports state this is not covered under warranty or the warranty expired. https://www.carproblemzoo.com/dodge/caliber/frame-rust-problems2.php based on the amount of issues, some even reporting wrecking with a complete loss, this should be a Safety Recall. As it is the mechanic has given me a starting estimate of $1800 but based on other people's reports they were charged $2k-3k for repairs. I will be contacting Chrysler/Dodge on Monday as I do not relish the thought of this level of repair financially for something that should be built to last 100+k miles!
- Air bags · Seat belts
TL* the contact owns a 2012 dodge caliber. The contact received notification of nhtsa campaign number: 16v668000 (seat belts, air bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
TL* the contact owns a 2012 dodge caliber. The contact received notification of nhtsa campaign number: 16v668000 (seat belts, air bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. An unknown dealer was contacted and confirmed that parts were not available for recall repairs. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Structure › Body · Suspension
Local repair shop doing oil change noticed front cross member was rusted out. *tr
- Electrical system · Exterior lighting · Vehicle speed control
I recently brought a used vehicle, when I took it for a test drive everything ran smoothly and things were working just fine, no problems. I drove the car home and when I got out the vehicle and tried to use the keypad to lock the doors, it didn't work and actually started the car than the alarm…
I recently brought a used vehicle, when I took it for a test drive everything ran smoothly and things were working just fine, no problems. I drove the car home and when I got out the vehicle and tried to use the keypad to lock the doors, it didn't work and actually started the car than the alarm went off. I had to start the engine and shut it back off and manually go and lock all doors because I also noticed the lock door button on the door did not work but the window buttons does. I immediately called them and informed them of the issue that I was experiencing. About 1 week went by and I started to feel the car dragging when trying to accelerate as well as the check engine light and gas cap light coming on. And most of all I noticed how quickly the mileage was moving versus the mileage I signed it at. I also called in and reported what I was experiencing, they suggested I bring in the vehicle to a shop they contract with to see the problem and resolve it. I took the vehicle in on the next available day for me for about 4-6 hours, I was called back to pick the vehicle back up. The check engine light and gas cap light was off but nothing else as far as the electrical problem within the car, and the dragging feeling as well as the mileage troubleshooting. I wasn't satisfied with the work that was done, so I called again to report the troubles and request for a refund because I was not satisfied with the vehicle and how high the mileage goes when I only drive 25 miles back and forth 6 days a week. I've had the vehicle for 8 weeks now, and this car maintenance IS poor as well as I have a strong feeling the cars been tampered with because of the damage to one of the vents in the car on the dash board, as well as the car needing an oil change already and I only had the vehicle since march 20, 2020. *tr
- Power train
I recently bought this car from northtown dodge in buffalo ny in jan of 2019. As the weather got warmer my transmission overheated lite comes on. I can't drive more than 50 miles tops with out it over heating. I'm the second owner. I am financing this car and can only drive it locally. I've also…
I recently bought this car from northtown dodge in buffalo ny in jan of 2019. As the weather got warmer my transmission overheated lite comes on. I can't drive more than 50 miles tops with out it over heating. I'm the second owner. I am financing this car and can only drive it locally. I've also read that there IS a lifetime warranty for the powertrain only if your the original owner. The car only had 64000 miles on it and it has 69771. So please help me with this issue I am a disabled veteran and this car IS my only means of transportation.
- Engine
Engine cradle rusted out after only 7years
- Engine
Was driving and lost all power when the lightening bolt light came on. had the throttle body replaced and was fine for a few months. now the light keeps coming on again and I've taken the car to the dealer at least 15 times and they keep relplacing different sensors and wiring. I have spent…
Was driving and lost all power when the lightening bolt light came on. had the throttle body replaced and was fine for a few months. now the light keeps coming on again and I've taken the car to the dealer at least 15 times and they keep relplacing different sensors and wiring. I have spent thousands of dollars for an issue that will not go away and no one can seem to figure out what the real issue IS because everytime they 'fix' one thing it seems to bring up other codes.
- Vehicle speed control
When braking the electric throttle control light flashes momentarily. It does not stay on. The car does not brake completely at these times and continues to accelerate and move forward another foot or two despite pressing the brake. When braking today the car continued to accelerate faster while…
When braking the electric throttle control light flashes momentarily. It does not stay on. The car does not brake completely at these times and continues to accelerate and move forward another foot or two despite pressing the brake. When braking today the car continued to accelerate faster while the foot was on the brake. In researching this, it seems the caliber specifically has a history of etc or electric throttle issues. Years affected by this safety issue include 2007 through 2012; but there IS no official recall from dodge. This IS a recall necessary issue! The essential function of acceleration and braking are non compromise areas of vehicle design that dodge has done little to address in the caliber model.
- Unknown or other
The structure/frame in the front of our 2012 dodge caliber was so rusted that it broke while we were driving. The frame broke when we pulled off of the interstate and stopped at the end of an exit. This issue has not been addressed by a recall, b ut a bulletin has been released.
- Suspension
Per the X69 warranty notice I had the crossmember replaced. The dealership states that dodge does not cover the alignment that IS needed due to the crossmember repair. The repair of the defect caused the need for the alignment. This seems to be a scam
- Seat belts
My drivers side seat belt automatically unlatches itself. I don't have to be doing anything. I give it tug every time I buckle to make sure it fasten. But while driving it will on it's on come unlatched and released. It has happened while driving and just sitting at red light. I immediately refasten it but this has happened enough time to raise concern if I would be safe in the event of an accident.
- Electronic stability control (esc)
2012 dodge caliber been having problems with the throttle control, car will not drive, it jerks it you try to change gears. This has been a problem for these cars for years, and it seems the company will not look into it, not only 2012 models but later models too. This IS an expensive job, and the consumer has to pay the price.
- Electrical system
Car stalled on highway. No warning just cut off. Had to tow it to dodge
- Air bags
Air bags did not deploy in my car accident in april 2017, car was totaled. Received concussion and whiplash as a result of my air bags not deploying. My car was reg maintained at the dodge dealership on river dale rd, ogden, ut called in and spoke with a rep (shay) 10/09/2017 and she gave me a case # 32584117 ...updated 10/13/17 *bf updated 7/26/18*jb
- Seats
My caliber was moving straight down a city street and was rear-ended. The ahr in the headrests deployed on both front seats. The auto body shop that repaired the car could not reset the headrests, even though they've done it on other cars before. We cannot get them back into position either. Dodge…
My caliber was moving straight down a city street and was rear-ended. The ahr in the headrests deployed on both front seats. The auto body shop that repaired the car could not reset the headrests, even though they've done it on other cars before. We cannot get them back into position either. Dodge avengers that were made the same year as our caliber were recalled for this reason, but the caliber was not included. We cannot drive the car without our heads being pushed forward unless we put the seats back farther than I feel IS safe. I have the accident report and all associated papers if they are needed. Today, we took the caliber in for a different recall and asked the dodge dealership if they would also fix the headrests, but they said they would not since it's not a part of the current recall.
- Unknown or other
Caught fire while driving with my 2 nephews in the car ( ages 7 and 9) smelled electrical burning, pulled into parking lot away from other cars and people, grey smoke was coming from drivers side hood and wiring harness had dropped from engine compartment and was on fire. 2 mins later the entire engine compartment went up in flames.
- Air bags · Seat belts
TL* the contact owns a 2012 dodge caliber. The contact received notification of nhtsa campaign number: 16v668000 (air bags, seat belts); however, the part to do the repair was unavailable. The contact called a local dealer (nashville chrysler dodge jeep located on 5800 crossings blvd, antioch, tn…
TL* the contact owns a 2012 dodge caliber. The contact received notification of nhtsa campaign number: 16v668000 (air bags, seat belts); however, the part to do the repair was unavailable. The contact called a local dealer (nashville chrysler dodge jeep located on 5800 crossings blvd, antioch, tn 37013) and was informed that parts were not available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. The vin was not available. Parts distribution disconnect.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Active Head Rest Inadvertent Deployment
The Office of Defects Investigation (ODI) opened PE19014 on September 9, 2019, to investigate 128 consumer complaints alleging that the Active Head Rest (AHR) inadvertently deployed without the occurrence of a crash or other rear impact event in model year (MY) 2014 Jeep Grand Cherokee and Dodge Durango vehicles.When…
The Office of Defects Investigation (ODI) opened PE19014 on September 9, 2019, to investigate 128 consumer complaints alleging that the Active Head Rest (AHR) inadvertently deployed without the occurrence of a crash or other rear impact event in model year (MY) 2014 Jeep Grand Cherokee and Dodge Durango vehicles.When ODI opened the investigation, ODI was aware of thirteen alleged injuries.A small number of Early Warning Reports identified driver and/or passenger front seat AHR inadvertent deployments without a rear impact event.Reported safety consequences resulting from the AHR deployments include concussions, headaches, soft tissue injuries, disorientation, nausea, vomiting and/or loss of vehicle control as a result of being surprised and distracted by being struck in the head by the inadvertent AHR deployment. On September 24, 2019, ODI sent an Information Request (IR) letter to Fiat Chrysler Automobiles (FCA).ODI requested certain detailed information from FCA related to the following subject vehicles: MY 2010-2014 Dodge Avenger 200, MY 2010-2014 Dodge Calber, MY 2010-2014 Chrysler Sebring, MY 2013-2015 Ram Tradesman, MY 2012 Ram Van, MY 2010-2019 Dodge Grand Caravan, MY 2010-2016 Chrysler Town and Country, MY 2010-2017 Jeep Compass, MY 2011-2020 Dodge Durango, MY 2011-2020 Jeep Grand Cherokee, MY 2010-2019 Dodge Journey, MY 2010-2012 Jeep Liberty, MY 2010-2011 Jeep Nitro, and MY 2010-2011 Jeep Patriot vehicles.On December 2, 2019, ODI received a response from FCA that included vehicle production data, consumer complaints, field reports, warranty claims, manufacturer actions, production changes, and other data related to the alleged defect from the start of production (2010) through September 24, 2019.On January 27, 2020, ODI received an update to the December 2, 2019, IR response from FCA.On September 22, 2020, ODI requested additional subject vehicle AHR information from FCA.ODI received FCA's response on October 21, 2020.ODI subsequently received an update to FCA's October 21, 2020, response on February 16, 2021.During the investigation, ODI requested updates to certain IR questions on two occasions.FCA provided updates to question #2 on March 5, 2021, and questions #2 and #5 on May 26, 2023. FCA’s IR response data identified approximately 7.5 million subject vehicles (with approximately 15 million AHR assemblies).Due to the large number of vehicles and failure reports, ODI focused its analysis on the FCA vehicle model with the highest failure rate to represent the worst-case scenario.For this purpose, ODI focused on MY 2012-2015 Jeep Grand Cherokee vehicles for its analysis.This population includes 710,890 vehicles that FCA manufactured between August 19, 2011, and August 8, 2015.ODI identified 2,839 alleged AHR failures within this limited population.ODI identified 263 alleged injuries that were caused by AHR failures in MY 2012-2015 Grand Cherokees vehicles.Of these alleged injuries, ODI categorized them as eighty-two (82) soft tissue (neck/whiplash, bruise) injuries, four (4) concussions, fifty-nine (59) headaches, and one hundred eighteen (118) without a specific injury description.Although complainants have alleged injuries, ODI has been unable to obtain evidence to substantiate or validate any injuries where medical treatment was required.Consumer outreach was conducted by ODI, where sixty-three (63) FCA complainants with alleged injuries were contacted.Twelve of the sixty-three FCA consumers responded and were interviewed by ODI.ODI requested medical records, however, only one response was provided. Attorneys representing the responding complainant provided a synopsis that indicated they had experienced prior neck-related injuries dating to the mid-1990s.ODI also contacted one hundred (100) consumers who submitted Vehicle Owner Questionnaires (VOQ) in an attempt to validate alleged injuries. Despite the efforts of ODI, the office has been unsuccessful at obtaining substantive documentation/evidence supporting complaints that allege serious injuries (where pre-existing medical conditions did not already exist). In addition to the low severity of alleged injuries caused by AHR deployments, there have been eleven alleged crashes and two alleged lane departures within the entire subject vehicle population that has been in the field up to sixteen years (with over 8,500 AHR inadvertent deployments).ODI was not able to validate that the alleged crashes were the result of inadvertent head rest deployments, and the crashes were minor in nature. ODI has conducted a thorough investigation of the alleged safety defect and with up to sixteen years of exposure for some vehicles and over 8,500 inadvertent AHR deployments, no serious crashes or injuries could be validated in the sub-population of focus.The lack of serious injuries validated by ODI with such large period of field exposure is consistent with thework done by NHTSA’s Human Injury Research Division and the Biodynamic Research Corporation, which support that an inadvertent AHR deployment is not likely to cause serious injury.In addition to the low risk of injury, FCA released an extended warranty program that covers inadvertent AHR deployment for ten years / unlimited mileage from the vehicle's in-service date. PE19014 is closed with the FCA extended warranty program.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist, and the Agency reserves the right to take additional action if warranted by new circumstances. To review a complete closing summary, please the attached closing report. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248517LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10231753Emissions recal U67 Catalytic Converter Efficiency
- 10230438Some of the above-involved vehicles may exceed NOx (Oxides of Nitrogen) emission level standards due to loss of catalytic converter efficiency
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10229936RBZ Or RHB Radio Software Enhancements
- 10229935RBZ Or RHB Radio Software Enhancements
- 10229871Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
- 10229825RHW RHP Radio Software Enhancements
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10228020Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10224076Active Head Restraint (AHR) Inadvertent Deployment - X86 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
- 10224065Warranty Bulletin D-20-18 (X86) Active Head Restraint - Select 2012-2017 Jeep Compass/Jeep Patriot (MK) and 2012 Dodge Caliber (PM) (Rev. A)
- 10224059Warranty Bulletin D-20-18 (X86) Active Head Restraint - Select 2010-2017 Jeep Compass (MK) and 2010-2012 Dodge Caliber (PM)
- 10223855Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10223512THROTTLE BODY For clarification, only use 68414676A$ on 2010 & earlier vehicles as supply is limited.
- 10223509TRANSMISSION, 5 Speed On replacing OE transmission 05106567A$/68042567A$ with reman transmission R8142074A$ replace with new Hydraulic Clutch Tube 05273429A$ to avoid interference with shift lever
- 10221594Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10221150Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220993RHR Radio Issue Description: Issue 1: While performing RHR radio reflash (software update), on rare occasions, the flash can fail to properly update the radio resulting in the radio running in Emergency IFS mode. This error condition can occur due to interrupting the software update, background radio operations interfering with the reflash process, etc. The radio will reboot, but with limited functionality ( may include but are not limited to: NAV, Voice Recognition, Bluetooth, or AUX jack are inop, no available space shown on HDD, etc.). The radio can still be properly updated by simply reinserting the software update disc and performing the reflash procedure again. To assist in the verification that the radio is running Emergency IFS perform the 1. Power on radio~ 2. Press MENU H/K~ 3. Press System Setup S/K~ 4. Press Manage HDD S/K~ 5. Press Display Available Space on HDD S/K~ 6. When running Emergency IFS, all items under Used, Available, and Capacity report as dashes Issue 2: If you are having troubles connecting a phone or a MP3 player, try removing the battery on the device and then going through the pairing/connection procedure again. If you cannot remove the battery on the device, perform a reboot. Each manufacturer has a different series of buttons to hold down to perform a reboot. If the problem still persists, try the device on another like vehicle with the same radio. If you are having the same connection issues on another like vehicle, the device may be faulty or it may not be compatible with the RHR radio. Go to www.chrysler.com/hostb/crossbrand/owners/en and click on ?Bluetooth Phone Compatibility Test Results? link for a list of phones that are compatible. For MP3 players and media storage devices, only .wma, .aac, .mp3, .sacd, .jpeg & .jpg files are supported. Remove all other file types and reevaluate the concern. Issue 3: If upgrading a vehicle from a low line radio that has factory installed UConnect
- 10220106No Start After Powertrain Control Module (PCM) Replacement and/or Reprogramming
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10219830Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
- 10218806Lower Control Arm Cold Temperature Squeak/Creak Noise This bulletin involves applying Nye lubricant to the front lower control arm rear bushing. Customer may describe a creak or squeak noise coming from the front suspension. Noise is typically more noticeable during cold temperatures below 4C (40F), noise may go away when temperature warms up.
- 10218783Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
- 10218303RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
- 10218037Hands Free Module Prompts Begin Erroneously.
- 10217965Lower Control Arm Cold Temperature Squeak/Creak Noise This bulletin involves applying Nye lubricant to the front lower control arm rear bushing. Customer may describe a creak or squeak noise coming from the front suspension. Noise is typically more noticeable during cold temperatures below 4C (40F), noise may go away when temperature warms up.
Every Dodge Caliber model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.