2018 Dodge Journey
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Journey › 2018
These records cover every 2018 Dodge Journey. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2018 Dodge Journey. Newest first.
Chrysler (FCA US, LLC) is recalling certain 2017-2018 Dodge Journey vehicles. The amber side reflex reflector assembled into the headlamp may not reflect brightly enough. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Risk and remedy
Risk
A dim reflector may reduce the visibility of the vehicle to other drivers, increasing the risk of a crash.
Remedy
Dealers will replace the headlamp assemblies, free of charge. Owner notification letters were mailed February 16, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Z99.
Chrysler (FCA US LLC) is recalling certain 2018-2019 Dodge Grand Caravan and Jeep Compass, 2018 Dodge Journey, and 2019 Jeep Cherokee vehicles. The rear brake caliper pistons on these vehicles may have an insufficient coating causing gas pockets to form, potentially reducing rear brake performance.
Risk and remedy
Risk
A reduction of braking performance can increase the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will bleed the vehicle's brake system, free of charge. The recall began September 29, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U86.
Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid…
Risk and remedy
Risk
A vehicle stall can increase the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
Chrysler (FCA US LLC) is recalling certain 2018 Dodge Journey vehicles. When reverse gear has been selected, the rear camera view may not be fully visible within two seconds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Risk and remedy
Risk
If the full camera view is delayed and the driver does not check their surroundings before backing up, there may be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the rearview mirror, free of charge. The recall began August 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U58.
Chrysler (FCA US LLC) is recalling certain 2018 Dodge Journey and RAM 1500, 2500, and 3500 vehicles. The backup camera may experience a loss of image display while backing up. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Risk and remedy
Risk
A loss of image in the rearview camera while backing up can increase the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will replace the rearview mirror, free of charge. The recall began August 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U56.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb)…
Risk and remedy
Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Owner complaints
237 complaints7 involved a crash2 involved a fire7 injuries
What owners report most
Latest complaints
- Engine
The contact owns a 2018 Dodge Journey. The contact stated that while driving at an undisclosed speed, the engine shut off without warning, causing an immediate loss of power steering and power brake functionality. The contact maintained control and guided the vehicle to a stop safely. After several attempts, the vehicle restarted. The manufacturer was notified of the failure. The failure mileage was 100,000.
- Back over prevention › Sensing system › Camera
I own a 2018 Dodge Journey Crossroad V6. I am submitting this complaint because I have experienced multiple serious and recurring problems with the vehicle. The vehicle has had multiple transmission repairs/replacements. I have spent a significant amount of money addressing transmission problems…
I own a 2018 Dodge Journey Crossroad V6. I am submitting this complaint because I have experienced multiple serious and recurring problems with the vehicle. The vehicle has had multiple transmission repairs/replacements. I have spent a significant amount of money addressing transmission problems, yet I continue to have major mechanical issues with the vehicle. The vehicle is also experiencing catalytic-converter/emissions-system problems. The check-engine light is on and the vehicle has produced diagnostic trouble codes P0420 and P0430, indicating catalyst-system efficiency problems affecting both banks. I am concerned about the reliability and safety of continuing to operate the vehicle with these issues, particularly given the repeated mechanical problems I have already experienced. Another significant safety concern is the factory backup camera. The camera intermittently glitches and the image can suddenly appear upside down. This makes the rear-view display unreliable and potentially prevents the driver from accurately seeing people, vehicles, or objects behind the vehicle while backing up. The problem is intermittent, which makes it especially concerning because the driver cannot reliably know when the camera will malfunction. I am requesting that NHTSA document these problems and investigate whether there are known defects or safety issues affecting 2018 Dodge Journey vehicles, particularly regarding the transmission, catalytic-converter/catalyst-system problems, and malfunctioning backup camera.
- Back over prevention › Sensing system › Camera
My rear view back up camera flipped upside down.. then it would have lines in it like an old tv.. now it’s just black and doesn’t work at all. There is a recall for my model just 1 year newer than mine. Can you help me!
- Exterior lighting
Technician notes exterior headlight assembly is defective and not reflecting bright.
- Air bags
Air Bag in the steering wheel. we took it back to the dealership for them to fix or do something about it and they refused to. No warning at all.
- Electrical system · Engine
Sitting at red light and with out warning car turns off I place it in park and try to start car again as soon as I push the ignition to crank the car a huge explosion from under the hood blew the hood backwards striking the a-piler to the driver's door trapping me inside the car as flames were…
Sitting at red light and with out warning car turns off I place it in park and try to start car again as soon as I push the ignition to crank the car a huge explosion from under the hood blew the hood backwards striking the a-piler to the driver's door trapping me inside the car as flames were observed coming through the dashboard had to forcefully kick driver side window out of frame to dive out of the car because the door being jammed shut
- Air bags · Exterior lighting
First Complain is that I was driving my 2018 Dodge Journey SE 2.4L across the interstate in [XXX]. My friend was sitting in the Passenger's seat when all of a sudden a loud popping noise happened and the airbag in the headrest popped out and almost hit my friend in the head. The second issue is…
First Complain is that I was driving my 2018 Dodge Journey SE 2.4L across the interstate in [XXX]. My friend was sitting in the Passenger's seat when all of a sudden a loud popping noise happened and the airbag in the headrest popped out and almost hit my friend in the head. The second issue is that the headlight assemblies that was replaced under a recall in 2022-2023 due to a reflective issue. Well the the recall assemblies are now collecting moisture bad and are blowing my headlight bulbs. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Back over prevention
The contact owns a 2018 Dodge Journey. The contact stated that while reversing, the rear-view camera displayed a blank image. The vehicle was taken to the dealer; however, the vehicle was not inspected. The contact was informed that an unknown recall was not associated with the VIN. The vehicle was…
The contact owns a 2018 Dodge Journey. The contact stated that while reversing, the rear-view camera displayed a blank image. The vehicle was taken to the dealer; however, the vehicle was not inspected. The contact was informed that an unknown recall was not associated with the VIN. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact later received an unknown recall notification with a similar failure description; however, the VIN was not under recall. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 80,000.
- Unknown or other
The factory-installed ParkView rear backup camera on my 2018 Dodge Journey is suffering from an intermittent, severe component failure. The video display randomly flips completely upside down while reversing. Frequently, the system fails entirely, leaving a completely blank or black screen on the center infotainment console.
- Service brakes · Visibility/wiper · Wheels
The brake calipers and brake rotators in the front are a safety concern. In other recalls the rear calipers and rotors have been flagged for recall. The front also has the same issue. Unrelated the visibility of the front windshield is extremely obstructed by the plastic body that surrounds the windshield. It is over 6 in wide and very unsafe when trying to exit Ally's or before turning at traffic lights.
- Back over prevention
The contact owns a 2018 Dodge Journey. The contact stated that while reversing, the rear-view camera image was inverted. The contact later received notification of NHTSA Campaign Number: 25E052000 (Back Over Prevention), and the vehicle was taken to a dealer for the recall repair; however, the…
The contact owns a 2018 Dodge Journey. The contact stated that while reversing, the rear-view camera image was inverted. The contact later received notification of NHTSA Campaign Number: 25E052000 (Back Over Prevention), and the vehicle was taken to a dealer for the recall repair; however, the dealer informed the contact that the VIN was not included in the recall and referred the contact to the manufacturer. The manufacturer was notified of the failure and scheduled an appointment with the dealer on the contact's behalf. The vehicle was taken back to the dealer, who declined to perform the recall repair because the VIN was not included in the recall. However, the contact stated that the recall indicated that the recall was part-specific rather than VIN-specific. The vehicle was not diagnosed or repaired. The manufacturer was notified of the issue, but no assistance was provided. The failure mileage was approximately 68,000.
- Unknown or other
The backup camera went off for several days. There was an error message on the rearview mirror. The camera picture eventually came back on, but the camera is now pointing at my bumper. I cannot see behind my car anymore and I can no longer use it to see while backing up.
- Back over prevention › Sensing system › Camera
Loss of Visibility in Backup Camera When in reverses the camera will come on then go fuzzy then go out and displays a camera in orange with an orange line going though it
- Back over prevention › Sensing system › Camera
Back up camera stopped working 3 years ago.
- Service brakes, hydraulic
The contact owns a 2018 Dodge Journey. The contact stated that while driving at an undisclosed speed, the vehicle stalled and failed to stop immediately. The traction control, ABS, and brake warning lights were intermittently illuminated. The vehicle was taken to an independent mechanic, who…
The contact owns a 2018 Dodge Journey. The contact stated that while driving at an undisclosed speed, the vehicle stalled and failed to stop immediately. The traction control, ABS, and brake warning lights were intermittently illuminated. The vehicle was taken to an independent mechanic, who determined that the calipers, rotors, and brake pads needed to be replaced. The vehicle was not repaired. The contact associated the failure with NHTSA Campaign Number: 18V523000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall. The manufacturer was made aware of the failure. The failure mileage was approximately 110,000.
- Back over prevention › Sensing system › Camera
The rearview backup camera intermittently fails to display an image when the vehicle is shifted into reverse. The camera occasionally works, but most of the time the screen is blank or the image does not appear. I understand that similar 2018 Dodge Journey vehicles were recalled for this exact…
The rearview backup camera intermittently fails to display an image when the vehicle is shifted into reverse. The camera occasionally works, but most of the time the screen is blank or the image does not appear. I understand that similar 2018 Dodge Journey vehicles were recalled for this exact defect, but my VIN was excluded even though it exhibits the same symptoms. This creates a significant safety hazard because the vehicle does not consistently comply with Federal Motor Vehicle Safety Standard No. 111.
- Back over prevention › Sensing system › Camera
Back up camera works sometimes and sometimes it doesn’t. The screen is either black with a orange camera with a orange line going through it or it works and the picture of blinking then goes black
- Unknown or other
There is a leak somewhere on my driver’s side of my 2018 Dodge Journey. The water is coming up from the floor. The wetness caused my foot to slip off the pedal initially. A mechanic has determined that there is a leak, but can’t determine how to fix it. I’ve seen other people complain about the same issue, without any definitive fixes.
- Visibility/wiper
My backup camera doesn’t work sometimes and it says that my camera is upside down but it’s not.
- Electrical system
Was driving when power saver mode came on then died on the road. Charged the battery and it died 1 minute later checked the voltage and it appears the pump voltage regulator stopped working
- Electrical system
The wires that control my windows no longer work because the wires are in my door jam and after years of opening and closing the door on the wires they are worn out
- Back over prevention
The contact owns a 2018 Dodge Journey. The contact stated while reversing, the rearview camera occasionally displayed a brief intermittent image, an inverted image, or the camera was inoperable. No warning lights were illuminated. The failure had occurred on several occasions. The contact related…
The contact owns a 2018 Dodge Journey. The contact stated while reversing, the rearview camera occasionally displayed a brief intermittent image, an inverted image, or the camera was inoperable. No warning lights were illuminated. The failure had occurred on several occasions. The contact related the failure to NHTSA Campaign Number: 18V398000 (Back Over Prevention); however, the VIN was not included. The vehicle was taken to a dealer, who confirmed that the VIN was not associated with the recall. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 84,000.
- Back over prevention · Visibility
The contact owns a 2018 Dodge Journey. The contact stated that while attempting to reverse, the back over prevention camera was foggy or the image was displayed upside down. An independent mechanic was not contacted. The vehicle was taken to an independent mechanic to be diagnosed, and the contact…
The contact owns a 2018 Dodge Journey. The contact stated that while attempting to reverse, the back over prevention camera was foggy or the image was displayed upside down. An independent mechanic was not contacted. The vehicle was taken to an independent mechanic to be diagnosed, and the contact was informed that the back over prevention camera wiring harness needed to be replaced. The vehicle was not repaired. The contact associated the failure with NHTSA Campaign Number: 18V396000 (VISIBILITY); however, the VIN was not included in the recall. The manufacturer was notified of the failure but offered no assistance. The failure mileage was 140,000.
- Electrical system · Fuel/propulsion system · Unknown or other
I am reporting a safety concern involving a 2018 Dodge Journey SE (VIN: [XXX] ) related to a failure in the vehicle’s emissions control system, specifically the catalytic converter and oxygen sensors. On January 13, 2026, the vehicle began producing a strong sulfur or “rotten egg” odor while…
I am reporting a safety concern involving a 2018 Dodge Journey SE (VIN: [XXX] ) related to a failure in the vehicle’s emissions control system, specifically the catalytic converter and oxygen sensors. On January 13, 2026, the vehicle began producing a strong sulfur or “rotten egg” odor while driving, and shortly afterward the check engine light illuminated. Diagnostic testing revealed trouble code P0420 (Catalyst System Efficiency Below Threshold – Bank 1). This code indicates that the catalytic converter is not properly converting exhaust gases, which can result in increased emissions and potential exposure to exhaust fumes. The vehicle was inspected by an authorized Chrysler, Dodge, Jeep, and Ram dealership in Maurice, Louisiana, which confirmed that the catalytic converter and oxygen sensors are failing and must be replaced. The vehicle remains available for inspection upon request. This vehicle was purchased for our growing family and is regularly used to transport our children, including a [XXX] infant and a [XXX] child. Since the emissions system issue began, occupants have noticed persistent exhaust-like fumes and strong sulfur odors while the vehicle is operating. Our infant has experienced recurring respiratory issues, and our [XXX] began experiencing respiratory symptoms after we purchased this vehicle. While we cannot definitively determine the cause, we are concerned that exposure to exhaust fumes from the malfunctioning emissions system may be contributing to these health issues. In addition, adult occupants have reported feeling unusually tired or fatigued after longer car rides in the vehicle, which raises additional concerns about potential exposure to exhaust gases inside the cabin. Because catalytic converter failures can allow harmful exhaust gases such as carbon monoxide and other pollutants to pass through the exhaust system improperly, we believe this issue presents a potential safety risk to vehicle occupants, p INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U
- Electrical system · Engine · Power train
I replaced the alternator and battery, 3 months later I was told I have an issue with the pcm which was similar with the recall for the same vehicle I drove. My vehicle was not part of the recall. Tbs Recall tv-u87-18
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Vehicle entrapment
The Office of Defects Investigation (ODI) opened PE23-008 on May 1, 2023 to investigate an incident involving a 2009 Dodge Journey alleging occupant entrapment during a vehicle fire that resulted in a fatality. During the investigation, ODI collected information from the manufacturer and involved parties to confirm or…
The Office of Defects Investigation (ODI) opened PE23-008 on May 1, 2023 to investigate an incident involving a 2009 Dodge Journey alleging occupant entrapment during a vehicle fire that resulted in a fatality. During the investigation, ODI collected information from the manufacturer and involved parties to confirm or refute the defect allegation. ODI has determined that additional reports of vehicle entrapment exist for other model year Dodge Journey vehicles. ODI continues to explore the cause of the thermal event and its potential effect on the actuation of the door locks. ODI also continues to explore other potential causes for door lock malfunction. ODI has determined that an upgrade to an Engineering Analysis (EA) is necessary to continue the review of the investigative material and to assess the risk to motor vehicle safety . To review the ODI report cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
- Back up camera failure
On February 27, 2024, the Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE) to investigate complaints alleging a loss of back up camera function in Model Year (MY) 2018 through 2020 Dodge Journey vehicles. Complainants reported experiencing black screens, upside down images, flashing…
On February 27, 2024, the Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE) to investigate complaints alleging a loss of back up camera function in Model Year (MY) 2018 through 2020 Dodge Journey vehicles. Complainants reported experiencing black screens, upside down images, flashing images, or blurred images. A back up camera that does not display correctly increases the likelihood of a crash or injury. Analysis of warranty data provided in response to ODI’s information request letter demonstrated a pattern of elevated warranty claims in subject vehicles built in calendar years (CY) 2019 and 2020. The rate of camera related warranty repairs for models built in CY 2019-2020 was nearly double that of vehicles built in CY 2017-2018. This increase in warranty claims occurred after the introduction of a new camera part number. ODI presented this analysis to FCA in February 2025. In response, FCA started a review of component change history in February 2025 and opened an internal investigation into MY 2019-2020 Dodge Journey and 2019-2021 Ram Promaster vehicles in May of 2025. On August 26, 2025, FCA submitted a Part 573 Safety Recall Report to the agency. In the report, FCA notes that a damaged microprocessor may cause the camera to not function properly. FCA will replace defective cameras in the recalled vehicles with an updated part that mitigates the issue. See NHTSA recalls 25V552 and 25E052 for further details. Based on available information, FCA's recalls address the alleged defect identified in this PE. Accordingly, this investigation is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
- Active Head Rest Inadvertent Deployment
The Office of Defects Investigation (ODI) opened PE19014 on September 9, 2019, to investigate 128 consumer complaints alleging that the Active Head Rest (AHR) inadvertently deployed without the occurrence of a crash or other rear impact event in model year (MY) 2014 Jeep Grand Cherokee and Dodge Durango vehicles.When…
The Office of Defects Investigation (ODI) opened PE19014 on September 9, 2019, to investigate 128 consumer complaints alleging that the Active Head Rest (AHR) inadvertently deployed without the occurrence of a crash or other rear impact event in model year (MY) 2014 Jeep Grand Cherokee and Dodge Durango vehicles.When ODI opened the investigation, ODI was aware of thirteen alleged injuries.A small number of Early Warning Reports identified driver and/or passenger front seat AHR inadvertent deployments without a rear impact event.Reported safety consequences resulting from the AHR deployments include concussions, headaches, soft tissue injuries, disorientation, nausea, vomiting and/or loss of vehicle control as a result of being surprised and distracted by being struck in the head by the inadvertent AHR deployment. On September 24, 2019, ODI sent an Information Request (IR) letter to Fiat Chrysler Automobiles (FCA).ODI requested certain detailed information from FCA related to the following subject vehicles: MY 2010-2014 Dodge Avenger 200, MY 2010-2014 Dodge Calber, MY 2010-2014 Chrysler Sebring, MY 2013-2015 Ram Tradesman, MY 2012 Ram Van, MY 2010-2019 Dodge Grand Caravan, MY 2010-2016 Chrysler Town and Country, MY 2010-2017 Jeep Compass, MY 2011-2020 Dodge Durango, MY 2011-2020 Jeep Grand Cherokee, MY 2010-2019 Dodge Journey, MY 2010-2012 Jeep Liberty, MY 2010-2011 Jeep Nitro, and MY 2010-2011 Jeep Patriot vehicles.On December 2, 2019, ODI received a response from FCA that included vehicle production data, consumer complaints, field reports, warranty claims, manufacturer actions, production changes, and other data related to the alleged defect from the start of production (2010) through September 24, 2019.On January 27, 2020, ODI received an update to the December 2, 2019, IR response from FCA.On September 22, 2020, ODI requested additional subject vehicle AHR information from FCA.ODI received FCA's response on October 21, 2020.ODI subsequently received an update to FCA's October 21, 2020, response on February 16, 2021.During the investigation, ODI requested updates to certain IR questions on two occasions.FCA provided updates to question #2 on March 5, 2021, and questions #2 and #5 on May 26, 2023. FCA’s IR response data identified approximately 7.5 million subject vehicles (with approximately 15 million AHR assemblies).Due to the large number of vehicles and failure reports, ODI focused its analysis on the FCA vehicle model with the highest failure rate to represent the worst-case scenario.For this purpose, ODI focused on MY 2012-2015 Jeep Grand Cherokee vehicles for its analysis.This population includes 710,890 vehicles that FCA manufactured between August 19, 2011, and August 8, 2015.ODI identified 2,839 alleged AHR failures within this limited population.ODI identified 263 alleged injuries that were caused by AHR failures in MY 2012-2015 Grand Cherokees vehicles.Of these alleged injuries, ODI categorized them as eighty-two (82) soft tissue (neck/whiplash, bruise) injuries, four (4) concussions, fifty-nine (59) headaches, and one hundred eighteen (118) without a specific injury description.Although complainants have alleged injuries, ODI has been unable to obtain evidence to substantiate or validate any injuries where medical treatment was required.Consumer outreach was conducted by ODI, where sixty-three (63) FCA complainants with alleged injuries were contacted.Twelve of the sixty-three FCA consumers responded and were interviewed by ODI.ODI requested medical records, however, only one response was provided. Attorneys representing the responding complainant provided a synopsis that indicated they had experienced prior neck-related injuries dating to the mid-1990s.ODI also contacted one hundred (100) consumers who submitted Vehicle Owner Questionnaires (VOQ) in an attempt to validate alleged injuries. Despite the efforts of ODI, the office has been unsuccessful at obtaining substantive documentation/evidence supporting complaints that allege serious injuries (where pre-existing medical conditions did not already exist). In addition to the low severity of alleged injuries caused by AHR deployments, there have been eleven alleged crashes and two alleged lane departures within the entire subject vehicle population that has been in the field up to sixteen years (with over 8,500 AHR inadvertent deployments).ODI was not able to validate that the alleged crashes were the result of inadvertent head rest deployments, and the crashes were minor in nature. ODI has conducted a thorough investigation of the alleged safety defect and with up to sixteen years of exposure for some vehicles and over 8,500 inadvertent AHR deployments, no serious crashes or injuries could be validated in the sub-population of focus.The lack of serious injuries validated by ODI with such large period of field exposure is consistent with thework done by NHTSA’s Human Injury Research Division and the Biodynamic Research Corporation, which support that an inadvertent AHR deployment is not likely to cause serious injury.In addition to the low risk of injury, FCA released an extended warranty program that covers inadvertent AHR deployment for ten years / unlimited mileage from the vehicle's in-service date. PE19014 is closed with the FCA extended warranty program.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist, and the Agency reserves the right to take additional action if warranted by new circumstances. To review a complete closing summary, please the attached closing report. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10251783Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10247995Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10247965CEL (Check Engine Lamp) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble Codes (DTCs) P057B Brake Pedal Position Sensor Circuit Performance, P1572 Brake Pedal Stuck, C0042-54 Brake Pedal Missing Calibration
- 10247906ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10247905ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
- 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
- 10243192Suspected engine coolant leak.
- 10243131CEL (Check Engine Lamp) Illuminated, P057B Brake Pedal Position Sensor Performance
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10239957Water Quality When Mixed With Engine Coolant
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10234468Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10234438CEL (Check Engine Lamp) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble Codes (DTCs) P057B Brake Pedal Position Sensor Circuit Performance, P1572 Brake Pedal Stuck, C0042-54 Brake Pedal Missing Calibration
- 10234420Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10234379ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10234378ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10231711Washer Light On And Will Not Turn Off After Adding Washer Solvent.
- 10230183No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10230029Customer Complaint May Include Engine Oil Leak Or Consumption
- 10229810Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229285Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
- 10229059No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
- 10229041Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
- 10228975Remanufactured Transmission Assembly 1. All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10224075Active Head Restraint (AHR) Inadvertent Deployment - X84 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
- 10224063Warranty Bulletin D-20-16 (X84) Active Head Restraint - Select 2012-2018 Dodge Journey (JC) and 2012-2014 Dodge Avenger/Chrysler 200 (JS) (Rev. A)
- 10224057Warranty Bulletin D-20-16 (X84) Active Head Restraint - Select 2010-2018 Dodge Journey (JC) and 2010-2014 Dodge Avenger/Chrysler 200 (JS)
- 10224022(Rev. A) Power Inverter Load Ratings
- 10223987Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10223855Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
- 10223559Blind Spot Or Park Assist Warnings, False Activation
Every Dodge Journey model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.