2012 Fiat 500

Recalls

4 recalls name the 2012 Fiat 500. Newest first.

• Power train › Automatic transmission

  Nov 15, 2019NHTSA 19V81700051,788 vehicles

  Chrysler (FCA US LLC) is recalling certain 2012-2013 Fiat 500 vehicles equipped with 6-speed automatic transmissions. The shifter cable bushing may fail allowing the cable to detach from the transmission.

  Risk and remedy

  Risk

  If the shifter cable detaches from the transmission, the transmission may not shift into the gear selected by the driver. Additionally, despite selecting PARK with the shifter, the vehicle may roll away. These scenarios may increase the risk of a crash.

  Remedy

  Chrysler will notify owners, and dealers will replace the shifter cable adjuster, free of charge. The recall began January 9, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is VB4.

  Full recall details →

• Power train › Manual transmission › Floor shift assembly

  Jul 3, 2019NHTSA 19E044000740 vehiclesEquipment

  DLT, LLC. is recalling certain CravenSpeed Fiat Short Shifter shafts sold for use in 2011-2019 Fiat 500 vehicles. The Shifter Shaft may have been improperly manufactured with a through hole for the set screw rather than a blind hole, which may lead to the breakage of the Shifter Shaft.

  Risk and remedy

  Risk

  If the shifter breaks while the vehicle is in motion, it can increase the risk of a crash.

  Remedy

  DLT has notified owners, and will provide a complete replacement shifter assembly with an updated shaft, free of charge. The recall began July 24, 2019. Owners may contact DLT customer service at 1-503-505-6886.

  Full recall details →

• Power train › Manual transmission

  May 16, 2016NHTSA 16V30200039,185 vehicles

  Chrysler (FCA US LLC) is recalling certain model year 2012-2016 Fiat 500 vehicles manufactured June 21, 2010, through January 12, 2016, equipped with a manual transmission. The clutch diaphragm spring may fracture and fail, causing an inability to switch gears.

  Risk and remedy

  Risk

  If the clutch diaphragm spring fails, the driver may not be able to shift gears or the vehicle may lose motive power, increasing the risk of a crash.

  Remedy

  The remedy for this recall will include the installation of a clutch pedal limiter and a clutch pedal switch. The recall began on November 10, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S34.

  Full recall details →

• Service brakes, hydraulic › Fluid

  Nov 10, 2011NHTSA 11V550000340 vehicles

  Chrysler IS recalling certain model year 2012 dodge journey and fiat 500 vehicles manufactured from october 24, 2011, through october 26, 2011. some vehicles were assembled with contaminated brake fluid and may experience a degradation of the sealing components within the brake system.

  Risk and remedy

  Risk

  This could lead to loss of braking ability increasing the risk of a crash.

  Remedy

  Chrysler will notify owners and replace all brake components that come in contact with hydraulic brake fluid. this service will be performed free of charge. the safety recall began on march 1, 2012. owners may contact chrysler at 1-800-853-1403.

  Full recall details →

Owner complaints

What owners report most

1. Power train203
2. Electrical system63
3. Engine51
4. Unknown or other36
5. Air bags32
6. Suspension21
7. Steering19
8. Fuel/propulsion system19
9. Service brakes12
10. Exterior lighting12

Latest complaints

• Sep 21, 2026MD
  Power train
  The contact owns a 2012 Fiat 500. The contact stated that upon shifting the gear shifter into drive(D), park(P), or reverse(R), the transmission failed to shift into the intended gear and shifted into a different gear. The vehicle was towed to the dealer after each failure. The dealer repaired the…

  The contact owns a 2012 Fiat 500. The contact stated that upon shifting the gear shifter into drive(D), park(P), or reverse(R), the transmission failed to shift into the intended gear and shifted into a different gear. The vehicle was towed to the dealer after each failure. The dealer repaired the vehicle under NHTSA Campaign Number: 19V817000 (Power Train); however, the failure persisted. The manufacturer was notified of the failure several times by phone and by an online complaint. Several cases were filed and the contact was referred to the dealer for assistance.

• Sep 10, 2026MD
  Unknown or other
  I am filing a complaint concerning a recurring gear shift failure in my 2012 fiat 500c. The same failure has occurred three times between June 10 and September 8, 2026. On June 10, 2026 I was able to move shift lever but the transmission remained in reverse and would not shift into another gear…

  I am filing a complaint concerning a recurring gear shift failure in my 2012 fiat 500c. The same failure has occurred three times between June 10 and September 8, 2026. On June 10, 2026 I was able to move shift lever but the transmission remained in reverse and would not shift into another gear despite multiple attempts. I did not know what the cause or problem was and had no knowledge that it might be related to a safety recall. I had vehicle towed to an independent repair shop who subsequently diagnosed a faulty gear shifter and replaced it and this restored the vehicles operation. The shop was able to replace the faulty part and the car was returned to me on June 12, 2026. On August 21, 2026the same failure occurred again. I was able to move the shifter but the transmission remained in neutral regardless of the selected shifter position and I had to push the vehicle onto the side of the road. Again the vehicle was undriveable and was towed to an authorized dealership who diagnosed a faulty gear shifter. The dealership performed the repair under safety recall VB4/NHTSA recall 19V-817 concerning the gear shifter cable adjust/bushing. The dealership then returned the vehicle to me as repaired on September 4, 2026. The vehicle sat parked for the following 3 days and was operated on September 8, 2026. On September 8, 2026 the exact same failure occurred a third time and after the authorized dealership completed the recall repaired. The gearshift lever moved, but the transmission would not change gears and the indicator remained in drive. The vehicle was again undriveable and had to be towed back to the dealership. Stellantis/FCAopened several case numbers and a case manager informed me the dealership would not be able to inspect the vehicle for 8 days. I was also informed that Stellantis/FCAand the dealership would not provide rental or alternate transportation assistance while the disabled vehicle awaited inspection.

• May 12, 2026NV
  Power train

  The clutch went out while downshifting upon making a turn onto a street. The gear shift became wobbly and would not shift into any gear. This happened without warning. Minutes before, my passenger and I were driving across town on a freeway.

• Oct 8, 2025VA
  Unknown or other · Wheels

  I have been dealing with identity theft and not really sure why when I put vin number to my vehicle I purchased September 25 2025 it says a different color

• Jun 20, 2025MA
  Electrical system · Unknown or other
  The vehicle had been stalling out on numerous occasions one being a freezing Xmas eve in Drive thru if it had happened somewhere isolated the driver could have frozen. I rented cars several times and replaced the alternator ,battery and at the final point at the dealership the mechanic suggested I…

  The vehicle had been stalling out on numerous occasions one being a freezing Xmas eve in Drive thru if it had happened somewhere isolated the driver could have frozen. I rented cars several times and replaced the alternator ,battery and at the final point at the dealership the mechanic suggested I purchase a $600 battery though I had a brand new one. The dealership gave me a $200 credit but it happened again, the mechanic in town said the Bluetooth component was draining the battery. They removed it and no problem since. The dealership mechanic talked around the issue and would not answer my questions about this. The safety issues related to this are dangerous and it appears to be known by mechanics about this model.

• Feb 6, 2025KY
  Suspension

  The contact owns a 2012 Fiat 500. The contact stated that while driving at an undisclosed speed, there was an abnormal clunking sound coming from underneath the front of the vehicle. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.

• Oct 22, 2024CA
  Electrical system
  The wiring harness bundle leading to the trunk failed between the trunk & upper drivers side of the car. Upper brake lights stopped working, then rear defroster, then trunk wouldn’t open & I got a license plate light warning on the dash. Mechanic tried to replace switch, still didn’t work, the…

  The wiring harness bundle leading to the trunk failed between the trunk & upper drivers side of the car. Upper brake lights stopped working, then rear defroster, then trunk wouldn’t open & I got a license plate light warning on the dash. Mechanic tried to replace switch, still didn’t work, the tried to replace handle (with license plate light). Mechanic broke more wires in bundle, back brake lights stopped working. The wiring harness bundle leading into the trunk is defective.

• Aug 30, 2024CA214,000 mi
  Power train
  The contact owns a 2012 Fiat 500. The contact stated while driving at approximately 65 MPH, the accelerator pedal was depressed; however, the vehicle lost motive power and stalled. The contact stated no warning light was illuminated. The contact was able to exit the highway. The contact stated that…

  The contact owns a 2012 Fiat 500. The contact stated while driving at approximately 65 MPH, the accelerator pedal was depressed; however, the vehicle lost motive power and stalled. The contact stated no warning light was illuminated. The contact was able to exit the highway. The contact stated that while attempting to restart the vehicle, the clutch pedal went to the floorboard and the contact was unable to start the vehicle. The contact had the vehicle towed to a dealer. The dealer diagnosed the vehicle and determined that the clutch pedal limiter and a clutch pedal switch needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 16V302000 (Power Train) which had been completed in 2023 on the vehicle by the same dealer. The manufacturer was not informed of the failure. The failure mileage was approximately 214,000.

• Aug 12, 2024TX
  Power train

  Front Wheel hub bearings grinding, very fast wear and tear Transmission still not shifting right after recall shifter cable replaced not grabbing gears

• Aug 2, 2024KS170,000 mi
  Power train
  The contact owns a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact…

  The contact owns a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated while attempting to reverse, the transmission failed to respond as needed. There were no warning lights illuminated. The vehicle was towed to the dealer, and it was confirmed that the recall repair was not yet available and there was no expected date when parts would be available. The manufacturer was made aware of the issue. The failure mileage was 170,000. Parts distribution disconnect.

• Apr 23, 2024NM
  Power train
  The contact owns a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer…

  The contact owns a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.

• Apr 1, 2024TX106,000 mi
  Power train
  The contact owns a 2012 Fiat 500. The contact stated that while driving at an undisclosed speed, the clutch pedal briefly depressed to the floor and remained stuck before releasing. The vehicle returned to normal functionality, but the failure became a regular occurrence. No warning lights were…

  The contact owns a 2012 Fiat 500. The contact stated that while driving at an undisclosed speed, the clutch pedal briefly depressed to the floor and remained stuck before releasing. The vehicle returned to normal functionality, but the failure became a regular occurrence. No warning lights were illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the clutch diaphragm spring. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 16V302000 (Power Train); however, the vehicle had already been repaired under the recall. The manufacturer was not notified of the failure. The failure mileage was 106,000.

• Mar 16, 2024TX
  Power train
  The clutch is out in the car. This may be caused by the clutch cover diaphragm spring and results in the inability to disengage the clutch, shift gears, and loss of mode of power. Leaving the passengers in a situation that can cause wreck without warning. My clutch went without any warning. I…

  The clutch is out in the car. This may be caused by the clutch cover diaphragm spring and results in the inability to disengage the clutch, shift gears, and loss of mode of power. Leaving the passengers in a situation that can cause wreck without warning. My clutch went without any warning. I would like to be able to have my car fixed since this is a issue that many other cars made the same year make and model as mine are have been recalled for this very issue I'm having. My car is very unsafe and without warning the clutch became none responsive and has been that way ever sense. I dont have the means to repair this and since you are taking responsiblty for this issue on other cars my car is having the same issue but not on the recall alrhough it should be on the recall as it is Very very dangerous.

• Feb 20, 2024NY50,000 mi
  Power train
  The contact's daughter owns a 2012 Fiat 500. The contact stated that while driving at various speeds, the vehicle stalled without warning. Upon investigation, the contact discovered NHTSA Campaign Number: 16V302000 (Power Train) which was linked to the failure. The dealer had been notified about…

  The contact's daughter owns a 2012 Fiat 500. The contact stated that while driving at various speeds, the vehicle stalled without warning. Upon investigation, the contact discovered NHTSA Campaign Number: 16V302000 (Power Train) which was linked to the failure. The dealer had been notified about the recall but stated that parts were not yet available and remained on backorder. The manufacturer had been notified of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 50,000. Parts distribution disconnect.

• Jan 9, 2024WA
  Child seat
  The contact owns a Cybex Car Seat, Model Name: Aton 2, Manufactured Date: Aug 2019. The car seat was used in a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 23C001000 (Child Seat). The contact reached out to the manufacturer to have a replacement seat mailed out…

  The contact owns a Cybex Car Seat, Model Name: Aton 2, Manufactured Date: Aug 2019. The car seat was used in a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 23C001000 (Child Seat). The contact reached out to the manufacturer to have a replacement seat mailed out; however, the contact was not provided the replacement car seat. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

• Nov 16, 2023HI
  Power train
  The contact owns a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer, who diagnosed a failure with the clutch assembly. The vehicle was not repaired…

  The contact owns a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer, who diagnosed a failure with the clutch assembly. The vehicle was not repaired due to parts not being available. The manufacturer was notified of the failure, and a case was filed. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was unknown. Parts distribution disconnect.

• Nov 1, 2023CA
  Power train
  The contact owns a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted and determined that parts were not yet available. The contact stated that the…

  The contact owns a 2012 Fiat 500. The contact received notification of NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted and determined that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.

• Sep 27, 2023RI
  Unknown or other
  I just purchased this 2012 Fiat 500 Cabrio. It seems it is widespread issue on the failure of the guiderails and components that work the convertible top are of poor quality and the tops become inoperable and the cost to repair can exceed the value of the vehicle. The safety issue is that if the…

  I just purchased this 2012 Fiat 500 Cabrio. It seems it is widespread issue on the failure of the guiderails and components that work the convertible top are of poor quality and the tops become inoperable and the cost to repair can exceed the value of the vehicle. The safety issue is that if the top has failed and failed to complete the cycle to close the rear hatch locks and remains locked with no way to access rear of vehicle by emergency responders. The scenario would be inability to get to a passenger by blocked doors and only can access through the rear of the vehicle. This could require cutting through the top or some other method. This could impact time element to extract a passenger from a car.

• Aug 22, 2023CA187,000 mi
  Power train
  The contact owns a 2012 Fiat 500. The contact stated while driving 25 MPH, the contact heard an abnormal sound coming from the vehicle, and the transmission failed to shift gear properly and lost motive power. There was no warning light illuminated. The contact was able to push the vehicle into a…

  The contact owns a 2012 Fiat 500. The contact stated while driving 25 MPH, the contact heard an abnormal sound coming from the vehicle, and the transmission failed to shift gear properly and lost motive power. There was no warning light illuminated. The contact was able to push the vehicle into a parking lot. The dealer was contact and stated there was no recall on the VIN. The vehicle was not diagnosed or repaired. The manufacturer was contacted and stated that the VIN was not under recall. The failure mileage was 187,000.

• Jun 14, 2023AZ
  Power train
  My 2012 Fiat 500 has had the same problem twice now. While driving, the clip attaching the clutch pedal to the master cylinder assembly breaks and disconnects. The pedal will go to the floor and stay there, and it becomes impossible to shift the manual transmission. After replacing the entire…

  My 2012 Fiat 500 has had the same problem twice now. While driving, the clip attaching the clutch pedal to the master cylinder assembly breaks and disconnects. The pedal will go to the floor and stay there, and it becomes impossible to shift the manual transmission. After replacing the entire master cylinder assembly, to repair this issue, it just happened again months later. The last time it happened, my husband was driving the car, and was barely able to prevent an accident after the pedal disconnected on the freeway. This topic is discussed in Fiat owners groups around the world, and it happens often. When I tried to contact Fiat with my concern, they simply replied by automated response to tell me this recall (Safety Recall S34) doesnt apply to my model based on my vin (despite the same resulting danger)

• May 12, 2023OH60,000 mi1 injury
  Power train
  The contact owns a 2012 Fiat 500. The contact stated while her daughter was parked in a parking lot with the vehicle in park(P), the contact was attempting to enter the front passenger’s side seat, her daughter accidentally shifted her foot off the brake pedal and the vehicle rolled backwards. The…

  The contact owns a 2012 Fiat 500. The contact stated while her daughter was parked in a parking lot with the vehicle in park(P), the contact was attempting to enter the front passenger’s side seat, her daughter accidentally shifted her foot off the brake pedal and the vehicle rolled backwards. The contact stated that the passenger’s side door struck her at less than 2 MPH and knocked her back and she fell onto the parking lot floor. The contact’s daughter had the vehicle turned on and attempted to stop the vehicle; however, when she exited the vehicle to help her mom up off the parking lot floor, the vehicle rolled backwards again while the gear shifter was still in park(P). The contact stated that her daughter turned the vehicle off and the vehicle stopped rolling backwards. The contact stated that the vehicle failed to restart and was pushed into a parking space. The contact stated that she was transported by ambulance to the emergency room. The Police was on the scene and filed a report. The contact stated that she had not broken any bones, however she had severely bruised her coccyx bone. The contact had not taken the vehicle to a local dealer. The vehicle had not been diagnosed and was not repaired. The contact had received a recall letter from the manufacturer for NHTSA Campaign Number: 19V817000 (Power Train). The manufacturer had been informed of the failure. The failure mileage was approximately 60,000.

• Mar 22, 2023TXCrash
  Steering

  As reported by numerous consumers the power steering just stop working while driving with no warnings. This caused a wreck involving my son & I and we're admitted to hospital. Apparently this is a widely reported problem yet it has not attention. It's extremely dangerous and cost more to fix than what the car is worth.

• Jan 31, 2023NC155,000 mi
  Power train
  The contact owns a 2012 Fiat 500. The contact stated that while driving at an undisclosed speed, the clutch was squishy while shifting gears. The dealer was made aware of the failure and confirmed that the VIN was included in NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do…

  The contact owns a 2012 Fiat 500. The contact stated that while driving at an undisclosed speed, the clutch was squishy while shifting gears. The dealer was made aware of the failure and confirmed that the VIN was included in NHTSA Campaign Number: 16V302000 (Power Train) however, the part to do the recall repair was not yet available until February. The clutch later failed, and the vehicle was inoperable. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 155,000.

• Oct 24, 2022AZ
  Steering
  While I was driving on a busy dyreet the warning light flashed and my car shut off, I was nearly hit by another vehicle. I took my car in to have it checked out and the dealer days the steering module loss confection and the steering column needs to be replaced. I see that this has been a known…

  While I was driving on a busy dyreet the warning light flashed and my car shut off, I was nearly hit by another vehicle. I took my car in to have it checked out and the dealer days the steering module loss confection and the steering column needs to be replaced. I see that this has been a known issue by Fiat but they fail to include all vehicles in their recall. I request that this be addressed. This is a safety issue.

• Oct 11, 2022PRFire
  Electrical system · Unknown or other
  In the morning (6AM) of September 19, my car car caught on fire while parked in my driveway. There were flames 3-4 feet height coming from the engine hood area. Once the fire was extinguished by the local fire department, I found the car was extensively damaged in the front outside and inside…

  In the morning (6AM) of September 19, my car car caught on fire while parked in my driveway. There were flames 3-4 feet height coming from the engine hood area. Once the fire was extinguished by the local fire department, I found the car was extensively damaged in the front outside and inside driver cabin. Upon further inspection I found the fire might have started with or around the battery, as it was completely melted. Further inspection on the back side of the car showed some stripped wiring in the assembly connecting to the rear hatch mechanism, lights, and other. In the days previous to this incident the battery had loss its charge completely twice in the span of a week and a half.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Electrical overstress

  EA19001Opened Apr 19, 2019Closed Sep 19, 2024Recall 20V024
  The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect.  During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air…

  The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect.  During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW.  The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications.  The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU.  In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment.  FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle.  Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW.  These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes.  An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time.   In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU.  This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners.  Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW.  The risk associated with the ASIC is equally shared among all OEMS involved in the investigation.  The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage.  There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation.  The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU.  If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC.  Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC.  All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled.  In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024.  With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10248517LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
• 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
• 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
• 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
• 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
• 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
• 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
• 10229871Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
• 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 10229177Part Description: Armrest Issue Description: When ordering a replacement armrest for a FIAT 500 VEHICLE built prior to 4/23/2012, a new FRAME-FRONT SEAT BACK is required (68194579AA). ~ Refer to DealerConnect, TechConnect for repair instructions for this assembly.
• 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
• 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 102248991.4L FIRE Service Engine (Normally Aspirated) This engine in this kit will contain one of 8 different production full dress engines, but labeled as component engine 68275870AA or 71AA. The received engine will be configured for use with an automatic transmission, (includes auto transmission adapter plate / flexplate) or manual transmission. (includes flywheel / clutch asm) The received engine will be configured with or without a block heater. If required, dealer to purchase/install the block heater. The included instruction sheet K6855863AB in engine kit 68275870AA is to be followed for all applications that it applies. Please see the sheet for details. In addition to the items detailed in instruction sheet K6855863AB, please read the following below to determine the rework required to install this engine into a 2012- 2018 Fiat 500 (FF) with 1.4L EAB normally aspirated engine: 1) determine which condition exists for the received service engine a) vehicle has a manual transmission, received manual transmission engine. b) vehicle has a manual transmission, received automatic transmission engine. c) vehicle has an automatic transmission, received automatic transmission engine. d) vehicle has an automatic transmission, received manual transmission engine. 2) follow below steps based on condition (a) through (d) above. Condition a) No further rework required, other than ordering/installing a block heater if required. Condition b) Remove flexplate / auto trans adapter plate / auto trans engine mounting bracket / auto trans engine oil dipstick from new service engine. Transfer flywheel / clutch / manual trans engine mounting bracket / manual trans engine oil dipstick from old engine. Order/install block heater if required. Condition c) Identify the automatic transmission adapter plate on the original engine. Looking at the rear of the vehicle engine with adapter plate mounted:
• 10223855Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
• 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
• 10223598Part Description: Armrest Issue Description: When ordering a replacement armrest for a FIAT 500 VEHICLE built prior to 4/23/2012, a new FRAME-FRONT SEAT BACK is required (68194579AA). ~ Refer to DealerConnect, TechConnect for repair instructions for this assembly.
• 10221822HVAC Control Panel Illumination Inoperative
• 10221594Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
• 10221511Part Description: Armrest Issue Description: When ordering a replacement armrest for a FIAT 500 VEHICLE built prior to 4/23/2012, a new FRAME-FRONT SEAT BACK is required (68194579AA). ~ Refer to DealerConnect, TechConnect for repair instructions for this assembly.
• 10221150Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
• 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
• 10221036Front Suspension Clunk Noise While Making Left And Right Turns This bulletin involves replacing the front strut jounce bumpers. Clunk noise coming from the front suspension. Noise may be more noticeable during cold temperatures below 40F (4C). Noise may be eliminated with warmer temperatures.
• 10220427Front And/Or Rear Emblems Bubbling And/Or Fading This bulletin involves replacing the rear FIAT emblem and inspecting and if necessary replacing the front FIAT emblem. Front And/Or Rear Emblems Bubbling And/Or Fading
• 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
• 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
• 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
• 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
• 10219830Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
• 10219787Customer Satisfaction Notification S20 Reprogram Powertrain Control Module The Powertrain Control Module (PCM) software on about 81,000 of the above vehicles may have backup lamp illumination timing that does not meet customer expectations. The PCM must be reprogrammed with new software.
• 10219779The Powertrain Control Module (PCM) software on about 81,000 of the above vehicles may have backup lamp illumination timing that does not meet customer expectations.
• 10218819Flash: Clock In The Cluster Gains Or Loses Time This bulletin involves updating the software in the Instrument Panel Cluster (IPC). Some customers may notice that their clock may gain or loses time.
• 10218783Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
• 10218314Flash: 1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales Code EAF only). P1607-00 - PCM Internal Shutdown Timer Rationality (Sales Code EAB only). P2610-00 - PCM Internal Engine Off Timer Performance (Sales Code EAB only). P1239-00 - Engine Oil Temperature Too Low (Sales Code EAB only). P0298-00 - Engine Oil Temperature Too High (Sales Code EAB only). P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. P0456-00 - Evap System Small Leak. Some customers may also experience the following conditions: Intermittent fast crank condition. Cranks as if no compression. Intermittent crank - no start condition. In addition, the following software enhancement is available: ** Scan tool enhancements to communicate with wiTECH to read DTCs descriptions for 2013 MY vehicles equipped with manual transmissions (Sales Code DDF) and Euro 4 Emission W/OBD (Sales Code NB4).** Improved reverse lamp activation time.
• 10218303RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
• 10218144System Improvements.
• 10218130Diagnostic And System Improvements.
• 10218104Diagnostic And System Improvements.
• 10217978Flash: Clock In The Cluster Gains Or Loses Time This bulletin involves updating the software in the Instrument Panel Cluster (IPC). Some customers may notice that their clock may gain or loses time.
• 10217942Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.

Every Fiat 500 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.