2000 GMC Savana 2500

Recalls

1 recall names the 2000 GMC Savana 2500. Newest first.

• Equipment

  Oct 24, 2007NHTSA 07E088000121,680 vehiclesEquipment

  Certain honeywell fram racing brand HP4 and HP8 oil filters that were manufactured from may 25, 2006, through september 14, 2007, and sold for use as replacement equipment for vehicles list above. the affected filters are marked with a date code a61451 through a72571 sequentially. the date code and part number appear on the filter housing. fram racing…

  Risk and remedy

  Risk

  This condition may cause inadequate sealing and loss of engine oil, possibly resulting in a fire.

  Remedy

  Honeywell will replace the affected oil filters free of charge. the recall began during november 2007. owners can contact fram customer service toll-free at 1-800-890-2075.

  Full recall details →

Owner complaints

What owners report most

1. Electrical system1
2. Service brakes, hydraulic1

Latest complaints

• Feb 16, 2010CA116,900 mi
  Electrical system · Service brakes, hydraulic
  TL* the contact owns a 2000 GMC sierra 2500. The contact stated that while driving at 5 mph and pulling up to his driveway he tried to unlock the doors of vehicle and they would not unlock. He was also unable to unlock the doors with the remote. he then tried to unlock the vehicle from the…

  TL* the contact owns a 2000 GMC sierra 2500. The contact stated that while driving at 5 mph and pulling up to his driveway he tried to unlock the doors of vehicle and they would not unlock. He was also unable to unlock the doors with the remote. he then tried to unlock the vehicle from the outside to no avail.this failure only occurs on the drivers side. The dealer was contacted and they stated to bring the vehicle in to be diagnosed. He then took the vehicle to an independent mechanic. It took 1 hour to open the door , they took the door apart and removed the electrical half of the mechanism and replaced it and then it finally worked. The part was ordered from the GMC dealer. There IS another problem with the anti lock brake system where he IS driving 5 mph when making a turn and stepping on the brakes the brakes do not engage. He has to put the vehicle in neutral for the vehicle to stop. GMC was contacted and they stated that they will repair the whole brake system at the owners expense . There have been no repairs at the time of the complaint for the brakes. The failure mileage was 116900 and current mileage was 117000.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11010544This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
• 11006421GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
• 11004761This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
• 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
• 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
• 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
• 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10249590This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
• 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
• 10248444Vehicle Recalls
• 10247552This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
• 10246952Programming And Activation Of Replacement OnStar Modules.
• 10246951Programming And Activation Of Replacement OnStar Modules.
• 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
• 10245950Canadian Customers Unable To Place Calls In The United States
• 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
• 10242843The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
• 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
• 10242252This technical bulletin provides information and a solution to a condition of Brake Pedal Moves or Self Applies at Full Turns.
• 10240344This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 10235799This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
• 10235713This bulletin provides information on Warranty Administration Required Operating Procedures - 8 Points (U.S. Only).
• 10234110This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
• 10232136This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
• 10228888This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
• 10227056This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10225615This service bulletin provides information on Module Harvesting.
• 10222839This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada.
• 10222796This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10220319This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
• 10219277This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 10219266This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
• 10214869This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10211061This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 10209980This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10209921This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10209734This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 10201115OnStar Voice Fallback Number Update

Every GMC Savana 2500 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.