2002 GMC Yukon XL 1500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › GMC › Yukon XL 1500 › 2002
These records cover every 2002 GMC Yukon XL 1500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2002 GMC Yukon XL 1500. Newest first.
Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes…
Risk and remedy
Risk
This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. In the presence of an ignition source, a fire could occur.
Remedy
Honeywell will notify owners and replace the fuel filters free of charge. the recall began on october 18, 2006. owners may contact fram customer service at 1-800-890-2075 (option 1).
Owner complaints
23 complaints1 involved a crash
What owners report most
Latest complaints
- Electronic stability control (esc)
Early in the morning I start up the truck to warm it up. I put the truck in reverse and as soon as I put the truck in drive the "reduce engine power" light comes on, then the truck goes "limp mode" (not allowing the truck to go no more than 20 mph in motion). I have to restart the truck 5 times for…
Early in the morning I start up the truck to warm it up. I put the truck in reverse and as soon as I put the truck in drive the "reduce engine power" light comes on, then the truck goes "limp mode" (not allowing the truck to go no more than 20 mph in motion). I have to restart the truck 5 times for the "reduce engine power" light to turn off. Leaving the "service engine" light on. This problem occurs every morning, no matter hoe long I warm up the truck. I bought this truck 3 years ago from a used car lot, and I didnt start having issues until 1 year ago. Throttle body assembly seems to be the issue with all gm vehicles.
- Service brakes
This vehicle has had a long history of needed brake work. brakes were recently changed again and it still has soft braking as well as pulsating braking. both of these factors lead to dangerously slow stopping even with practically new parts.
- Service brakes
This vehicle came with factory tow package. Brake lines, rear, were repaired a year ago. towing a horse trailer with horse ( approx 6500 lbs total ), the front break line from the ABS module broke and pedal went to floor while exiting 90W onto 84W. trailer brakes finally stopped the vehicle a…
This vehicle came with factory tow package. Brake lines, rear, were repaired a year ago. towing a horse trailer with horse ( approx 6500 lbs total ), the front break line from the ABS module broke and pedal went to floor while exiting 90W onto 84W. trailer brakes finally stopped the vehicle a few inches from the auto in front of us . this was on new years eve this year, and 2:00pm in the afternoon. found a garage/mechanic to repair the front line. this could have caused a major accident involving a number of cars and trucks. I have the vehicle inspected at every oil change, and have it repaired when needed. I have read of many issues with the (cheap ) brake lines gm has used in these vehicles( 1999 to 2003 ), and as they get older, they are just an accident waiting to happen. gm should recall these vehicles, and fix the problem with corroding break lines. especially with their " professional grade" advertisements. Very misleading. *tr
- Service brakes
When braking, the antilock brakes kick in no matter if needed or not. we have had several close calls on both city streets & highways. the car was already recalled and fixed for front wheel speed sensor corrosion, 05v379000, and the same thing IS happening again. the sensor was not replaced…
When braking, the antilock brakes kick in no matter if needed or not. we have had several close calls on both city streets & highways. the car was already recalled and fixed for front wheel speed sensor corrosion, 05v379000, and the same thing IS happening again. the sensor was not replaced, just cleaned and put back in. I don't understand how this fixed the problem when the corrosion can come back and did. it was just 30,000 miles later. we have taken it to a dealer and have called gm. we were told the recall IS fixed and it will cost us $423.00 per side to fix plus tax. please help and let us know what to do next.
- Service brakes
I have been notified by 2 mechanics that the my brake lines are rusted/corroded and need to be replaced. I have researched the multiple complaints to GMC regarding this issue. nhtsa has recommended a recall. despite GMC corporate statements that the fix/replacement of brake lines will cost…
I have been notified by 2 mechanics that the my brake lines are rusted/corroded and need to be replaced. I have researched the multiple complaints to GMC regarding this issue. nhtsa has recommended a recall. despite GMC corporate statements that the fix/replacement of brake lines will cost $500 (parts and labor) the GMC dealer in my area (danvers, ma) has quoted me over $1,200 and claims ignorance to the $500 claim. I believe this repair should be subject to recall and correction by GMC at no cost to me the owner. *tr
- Service brakes
I have had 2 incidents with my 02 GMC yukon where the brake lines have failed due to early and unexpected/unreasonable corrosion where they failed without warning almost caused serious accidents. the first incident occurred with about 76,000 miles on the car and I was driving on the highway and…
I have had 2 incidents with my 02 GMC yukon where the brake lines have failed due to early and unexpected/unreasonable corrosion where they failed without warning almost caused serious accidents. the first incident occurred with about 76,000 miles on the car and I was driving on the highway and applied the brakes as I approached the exit ramp and the pedal went straight to the floor without the vehicle stopping. With my family in the car I drifted past the exit and approximately another 1 mile before finally coming to a stop on the shoulder. After getting the car towed to a local mechanic, they informed me that the rear brake lines rusted through and this was a common problem they see on gm vehicles. They were surprised I was not in a serious accident and I paid $500 to have the replacement lines fabricated. about a year later with about 85,000 miles on the vehicle and again without warning as my wife was driving my children across a bridge and attempted to brake and again the pedal went straight down to the floor not stopping the vehicle and she held down the horn to warn pedestrians and other cars. The vehicle finally stopped after running 2 red lights. The mechanic indicated that all the lines coming out of the master cylinder/booster were rusted through and brake fluid was pouring out. Again having to fabricate and replace all the lines out of the master cylinder was expensive, this time costing $1,500. the nhtsa needs to do a full investigation of this problem as I have heard many times that this IS a faulty design and extremely dangerous requiring a recall. I take good care of my cars, have the undercarriage cleaned frequently and ask my mechanic to inspect everything on the car on a bi-annual basis and these incidents happen without warning. I hope gm will reimburse all those like me who spent thousands fixing the vehicle after a very dangerous situation. *tr
- Service brakes
In december 2012 we were traveling when my husband went to hit the brakes, they completely gave way and stuck on the bottom of the floor. in panic he tried every maneuver possible as we were coming up on an l curve that quickly led to a stop sign entering a major intersection. as we made the l…
In december 2012 we were traveling when my husband went to hit the brakes, they completely gave way and stuck on the bottom of the floor. in panic he tried every maneuver possible as we were coming up on an l curve that quickly led to a stop sign entering a major intersection. as we made the l curve, two motorcyclists were at the light and we were coming straight at them at 40 miles an hour. making a massive turn and risking flipping the car over, he hooked the truck to the right unto the embankment of the major road barely avoiding killing these two motorcyclist. we drove on the embankment until the car came to a stop. we called a tow truck and he towed us to a md repair shop. we then received a call from the repair man that the brakes lines were completely rusted out and that we blew the brakes line and instantaneous lost all oil. no brakes left whatsoever. he told me to call the dealer and push for a recall since that much rust was a sign of an issue when the car was made. there was no seal on the under carriage. I did and the gentleman at boyle buick said not to tow it in to their shop as it would not be covered under warranty as they see it all the time but that gm has never paid for these to be fixed on a car out of warranty and despite this being a constant issue they see- it did not have a recall on it. he even gave us the name of a company that makes stainless steel aftermarket brake lines already bended as that IS where they buy them- they see it so often. this company sprung up because so many people had this exact same issue they could make substantial money pre-fabbing these lines. I kept my receipt for these brakes line ($1,235.00) as I had to believe that someone would eventually hold gm liable for not coating the underside and putting thousands of lives at risk. *tr
- Service brakes
ABS brake module IS not hermetically sealed with an o-ring gasket. because of this moisture can get inside module and damage internal components. damaged units cause ABS and brake lights in dashboard to light up. *tr failure of ABS brake module can cause ABS brakes to lock up when braking quickly at speeds in excess of 20 mph.
- Service brakes
I tried to stop and when I applied the brakes the ABS activated without any reason. The roads were clean and dry. There was not any warning indicator for the ABS brakes, I am told there IS a recall for this issue but the dealer says mine was already done. Obviously the fix was not effective if I am experiencing the problem now. *tr
- Parking brake · Service brakes
This involves the emergency brake that will not hold the vehicle when applied. I had noticed that the emergency brake did not do a very good job holding the vehicle when applied from the time it was new but had not given it much thought since I never used it. Several years later I tried to get it…
This involves the emergency brake that will not hold the vehicle when applied. I had noticed that the emergency brake did not do a very good job holding the vehicle when applied from the time it was new but had not given it much thought since I never used it. Several years later I tried to get it inspected and it failed. I found that the rear emergency brake that II never use were had worn out shoes and had damaged the drum. I replaced the shoes and one drum and was able to get the brakes to hold when the brake were applied. The brake has been applied properly sense then but started to do the same thing again by not holding the vehicle. I had to replace the shoes again at 172,000 miles. This seems to be a problem with this vehicle that general motors will not address. *tr
- Service brakes
While pulling out of driveway, I pushed brake before entering street - pushed all the way down, but had no brake action. Was braking fine day before. *tr
- Service brakes, hydraulic
The brakes recently failed on our 2002 GMC yukon XL 1500 4WD SUV. while descending a moderately steep hill on our street, my wife depressed the brake pedal to slow the vehicle, and the pedal went all of the way to the floor. thankfully, she was able to coast the vehicle up the next hill and…
The brakes recently failed on our 2002 GMC yukon XL 1500 4WD SUV. while descending a moderately steep hill on our street, my wife depressed the brake pedal to slow the vehicle, and the pedal went all of the way to the floor. thankfully, she was able to coast the vehicle up the next hill and bring it to a stop. inspection revealed brake fluid had leaked from a highly corroded brake line on the underside of the vehicle, below the driver's seat. three other adjacent brake lines were also similarly corroded. upon contacting the nearest gm dealer (tom gill chevrolet, florence, ky), the service agent informed me "that's not uncommon in a 9-year old vehicle." four almost completely rusted brake lines, in just 8 years? that ridiculous! I have a 16-year-old toyota in the driveway that doesn't have this problem, and I shouldn't expect to have it with my much more expensive and far newer american made SUV. tom gill service refused to give me an estimate of repair, stating I would have to have it towed the 17 miles to the dealership, with a "we're competitive--we'll give you a competitive price." comforting. a few more calls to local shops revealed an estimate of between $850-1,100 for removal and replacement of all four lines. I ended-up spending 22 hours pulling-out the old lines and bending/flaring/installing entirely new front lines myself. Last week I learned I'm not alone--a wcpo news report revealed this IS problematic with gm trucks/suvs, with gm deflecting blame to "salt brine." after all of these years, american manufacturers are still taking shortcuts and canning ethics...toyota will continue to win market share as long as this crap continues. I'm angry because it's putting our families at risk. no one got hurt this time, at least not in my family, but the potential IS certainly there. I think gm should be held accountable, and I am holding onto the corroded brake lines as evidence in the event of a future recall. I'D also like those 22 hours back. *Tr
- Electrical system
I purchased a 2002 GMC yukon XL 2 days ago, sold "as IS" with no warranty. at the bottom of the speedometer are the lights that indicate the position of the shifter (park, reverse, neutral, overdrive, and gears 3,2 and 1) and also the odometer reading. These indicator lights worked fine during the…
I purchased a 2002 GMC yukon XL 2 days ago, sold "as IS" with no warranty. at the bottom of the speedometer are the lights that indicate the position of the shifter (park, reverse, neutral, overdrive, and gears 3,2 and 1) and also the odometer reading. These indicator lights worked fine during the test drive but became intermittent on the drive home from the dealership and while driving the vehicle since then. You lose all indication of what gear you are in and of the odometer reading. This problem could lead to a driver shifting gears improperly and unsafely, such as shifting into a forward gear in a parking lot when the reverse gear IS intended or shifting into reverse while driving and seeking overdrive after being in a lower gear. I have now been told by a few dealers that instrument cluster failures are somewhat common in yukon xls and are costing an average of about $700 to replace the entire instrument cluster when only a single gauge IS having an intermittent problem. Since the problem seems to be common and can effect safety, as in the examples I gave above, please investigate this problem and see if a recall/manufacturer fix IS warranted. I just investigated driver complaints around the internet and found several complaints about yukon XL speedometer failure/intermittent, for instance. If a driver doesn't know what speed he IS traveling at he IS a less safe driver and a potential hazard to others. Excessively slow drivers and excessively fast drivers can both cause serious problems in traffic, and in rural areas there may be fewer, if any, drivers alongside to help gauge the normal speed that IS appropriate. Also a vehicle could unexpectedly fail or stall in traffic, causing an accident, if a driver IS unaware of an extremely low battery or low fuel, etc. Instrument clusters are very important for safety in many ways. Please investigate problems with intermittent and failures in the instrument clusters used in 2002 GMC yukon xls. (Mine IS a 1500). *Tr
- Seat belts
I own a 2002 chevy tahoe, and I'm in charge of servicing three, 2002 and 2003 GMC yukons for my place of employment. The middle row seats in all of these have seatbelt issues. These are extremely expensive to fix or replace and all four vehicles that I deal with have at least one of the shoulder belts in that middle row seat that either wont come out or won't retract. *Tr
- Engine and engine cooling
I have a 2002 GMC yukon XL. this vehicle that I recently purchased has stalled on two occasions while driving. both times I was in traffic and had difficulty safely getting off the roadway, as I had no power. I have done a fair amount of research and found that I am 1 of many with this complaint. *Tr
- Service brakes, hydraulic
The brakes on my 2002 GMC yukon XL seem to fail at low speed. You press on the brake pedal and it goes to the floor and does not stop. We have had the speed senor replaced, recalled part replaced in 2005. The description sounds exactly like what IS happening with my truck. GMC says it will not…
The brakes on my 2002 GMC yukon XL seem to fail at low speed. You press on the brake pedal and it goes to the floor and does not stop. We have had the speed senor replaced, recalled part replaced in 2005. The description sounds exactly like what IS happening with my truck. GMC says it will not replace this part for free,since it has been replaced once before. This part IS a very serious safety part, I feel GMC should replace it. safety first. *Tr
- Service brakes, hydraulic
After three previous "repairs" including one recall, our 2002 GMC yukon XL ABS brakes are malfunctioning for the fourth time, exhibiting the exact same condition that was the subject of a 2005 recall. the ABS brake system activates on dry pavement when brakes are applied at low speeds, resulting…
After three previous "repairs" including one recall, our 2002 GMC yukon XL ABS brakes are malfunctioning for the fourth time, exhibiting the exact same condition that was the subject of a 2005 recall. the ABS brake system activates on dry pavement when brakes are applied at low speeds, resulting in a longer than normal stopping distance. on several occasions collisions have narrowly been avoided as the ABS brake pedal "chattering" interferes with normal braking at crucial times. *Tr
- Service brakes, hydraulic · Steering · Wheels
The left front wheel nearly fell off our 2002 yukon 1500 slt. We had just stopped to pay a toll on the maine turnpike. As we drove out of the toll booth, my husband had difficulty controlling the vehicle. A terrible grinding noise came from the left front end of our car. The ABS light flashed on.…
The left front wheel nearly fell off our 2002 yukon 1500 slt. We had just stopped to pay a toll on the maine turnpike. As we drove out of the toll booth, my husband had difficulty controlling the vehicle. A terrible grinding noise came from the left front end of our car. The ABS light flashed on. Gripping the wobbly steering wheel, my husband guided the vehicle across several lanes of traffic into the narrow breakdown lane. The left front wheel was almost completely off the vehicle. Cars and trucks whizzed by dangerously close as my husband tried to reposition the wheel and tighten the bolts that had loosened. Two hundred miles from home, and a few miles from our destination, we hobbled on. My husband stopped repeatedly to retighten the bolts. We got off the turnpike and inched along slowly on back roads. Still, this final leg of our journey was treacherous. Steering was all but impossible. We nearly went off the road. When finally safely stopped, the tire and metal wheel parts were so hot, they had to be hosed down. Smoke came from the wheel. The metal was scorched. The caliper holding the wheel was severely bent, the brakes destroyed, and the inside of the wheel scored and charred. Parts had disintegrated. The bearings were gone. It IS incredible we were able to drive even 10 miles. If I had been behind the wheel, instead of my husband, I would have lost control of the car. If the problem had manifested itself as we hurtled down the highway instead of exiting a toll booth, the wheel surely would have flown off the car into traffic. I shudder to think of the consequences. Our two young sons were in the back seat. we were very lucky, but are now minus a vehicle we need. It sits where we left it, 200 miles away. We need to bring it home, but the tow charge will be prohibitively expensive, not to mention the repairs. This should not have happened. We never received any notice of known problems related to an issue with this yukon's wheels. Why not? *Tr
- Structure
My wife was driving on the highway and the back lift glass blew off the tailgate and hit a motorcyclist he was not injured but there was some damage to his bike. The insurance company will not cover the repairs to the glass and the dealer said that there IS no recall for the glass so I have to pay…
My wife was driving on the highway and the back lift glass blew off the tailgate and hit a motorcyclist he was not injured but there was some damage to his bike. The insurance company will not cover the repairs to the glass and the dealer said that there IS no recall for the glass so I have to pay for replacement out of pocket. When I went to the glass place the guy told me the same thing happen with his SUV and the dealer said they had to update his lift glass with bolts instead of the glue that was originally used when manufactured. *Tr
- Power train › Automatic transmission › Lever and linkage › Column shift
On 2/24/2008 I tried to move the automatic gear select lever on my 2002 GMC yukon XL to the park position. The gear select lever would not move into the park position. As a result, I could not remove the keys or stop the vehicle from moving while sitting in my garage. I could place it in any gear…
On 2/24/2008 I tried to move the automatic gear select lever on my 2002 GMC yukon XL to the park position. The gear select lever would not move into the park position. As a result, I could not remove the keys or stop the vehicle from moving while sitting in my garage. I could place it in any gear except park. After looking around the base of the shift lever, I noticed a part of a broken spring stuck in the pivot point of the gear shift lever. I removed the broken spring parts and the shift lever will now move to park. As a result of the return spring being broken the lever now moves freely and we have to manually move it towards the front of the vehicle to stop the engine and remove the keys. With the vehicle running, and the gear shift lever moved towards the rear of the vehicle all the indicator lights for the transmission turn off, at this point it IS unknown what gear the vehicle IS in. I called my local chevorlet dealer on 2/25/08 and they said this IS my problem and I would have to pay to even get diagnosis or estimate for the repair. I feel this IS a safety issue, I don't think this should ever happen to any vehicle. *tr
- Tires › Tread/belt
Continental sport lt/suv tire tread was coming apart on the highway. *tr
- Engine and engine cooling › Engine
Vehicle stalling without reason. Often in heavy traffic. Manufacturer used plastic intake that failed due to heat. $1050.00 to replace part with same type. Warranty for 12 months or 12,000 miles. Part could fail again at my expense. *jb
- Electrical system › 12v/24v/48v battery
I am concerned that GMC IS neglecting a serious issue that could cause car fires. I called GMC 800)462-8782 and spoke with stacy whaples today. she was not the least concerned that this IS a repeat problem that could cause serious injury. the original a/c delco was replaced on this new vehicle…
I am concerned that GMC IS neglecting a serious issue that could cause car fires. I called GMC 800)462-8782 and spoke with stacy whaples today. she was not the least concerned that this IS a repeat problem that could cause serious injury. the original a/c delco was replaced on this new vehicle around 1 1/2 years and again the same problem with this vehicle 2 3/4 years later. Why IS it a 6 year warranty if you cannot even get half of that out of it safely. after the first replacement GMC said I am not eligible for any warranty regardless if it IS a defect or not. furthermore, at least 5 people I know with the GMC suv's ( yukon's & envoy's) that have the battery manufactured by : a/c delco with the connection on the side leaks batter acid and cause corrosion on the terminal and the cables. the dealer told me that I only needed to replace the battery. I am not satisfied that this IS safe and that the cables are going to be safe. several dealers have acknowledged that this IS a problem with the design a/c delco battery. this IS the 2ND time it has leaked, the property damage marked below IS ?- I do not know what else IS damaged below or around the spot where the battery resides? *nm
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010544This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
- 11006421GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
- 11004761This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
- 10252735This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
- 10252163XM Audio Traffic And Travel Link Availability And Operation.
- 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10251887This bulletin advises the technician of possible location of an internal coolant leak from a specific cylinder head and location.
- 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10249590This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
- 10249011This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
- 10248444Vehicle Recalls
- 10247681Information On Requests To Add OnStar Bluetooth Option.
- 10247552This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
- 10246952Programming And Activation Of Replacement OnStar Modules.
- 10246951Programming And Activation Of Replacement OnStar Modules.
- 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
- 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
- 10245950Canadian Customers Unable To Place Calls In The United States
- 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10244201This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10242843The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
- 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 10240344This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
- 10235802This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
- 10235799This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10235713This bulletin provides information on Warranty Administration Required Operating Procedures - 8 Points (U.S. Only).
- 10234141This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
- 10234110This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
- 10232136This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
- 10228888This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
- 10227056This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10225615This service bulletin provides information on Module Harvesting.
- 10224820This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10222839This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada.
- 10222796This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
Every GMC Yukon XL 1500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.